Overview

In this tech tip, learn how to use the Double Wall Ring (DWR) interfacial accessory on TA Instruments HRX rheometers to perform quantitative interfacial measurements, complete essential calibrations, accurately position the ring at the liquid interface, and optimize oscillatory testing conditions.

Overview

In this tech tip, learn how to apply the Cox-Merz rule in Trios software to predict high-shear polymer melt behavior from frequency sweep data and validate the results against steady-state flow measurements.

Overview

This TA Tech Tip demonstrates sample preparation procedures for the Coin Cell Differential Scanning Calorimeter, including the preparation of an indium sample for calibration.

Overview

In this Tech Tip, we discuss the parallel plate geometry on the TA Instruments HRx Rheometer and show you how to set up and run this experiment on a soft solid.

HRx Overview: https://www.tainstruments.com/an-overview-of-the-discovery-hrx-rheometers/
How to Avoid Slippage: https://www.tainstruments.com/how-to-avoid-slippage-during-rheological-testing/
Geometry Calibrations: https://www.tainstruments.com/plate-or-cone-geometry-calibrations-dhr/

Overview

Check out our video on low viscosity samples: https://www.tainstruments.com/how-to-load-low-viscosity-liquid-samples-on-a-rotational-rheometer-2/.

In this Tech Tip, we cover an instrument overview of our Hybrid Rheometers, also referred to as our HRx series.

For more helpful tips, subscribe and check out our website at https://www.tainstruments.com.

Overview

In this Tech Tip, we’ll be discussing how to use RheoGuide software to run experiments on the Discovery Core Rheometer.