Rheology Tech Tips - TA仪器

Arbitrary Wave Functionality on the Discovery™ ARES-G3™ Rheometer

Juli Varvarezis — Mon, 09 Mar 2026 02:54:28 +0000

Overview

This TA Tech Tip introduces the new arbitrary wave capabilities available on the Discovery ARES‑G3 Rheometer. The exciting improvements extend temperature capabilities, simplify test setup, and improve data quality for evolving systems.

The post Arbitrary Wave Functionality on the Discovery™ ARES-G3™ Rheometer first appeared on TA仪器.

Loading Polymer Pellets Using the New Discovery™ ARES-G3™ Rheometer Interface

Juli Varvarezis — Mon, 09 Mar 2026 02:51:22 +0000

Overview

This TA Tech Tip walks users through loading polymer pellets on the Discovery ARES-G3 Rheometer using a disposable melt ring. It also highlights how the updated keypad and touchscreen work together to streamline setup and make everyday workflows faster and easier.

The post Loading Polymer Pellets Using the New Discovery™ ARES-G3™ Rheometer Interface first appeared on TA仪器.

Dual Cantilever Installation & Calibration – DMA 850

Juli Varvarezis — Thu, 13 Mar 2025 21:09:39 +0000

In this TA Techtip, we show you how to install and calibrate the dual cantilever clamp for the new Discovery DMA 850 from TA Instruments

The post Dual Cantilever Installation & Calibration – DMA 850 first appeared on TA仪器.

Single Cantilever Installation & Calibration – DMA 850

Juli Varvarezis — Thu, 13 Mar 2025 21:04:49 +0000

In this TA Techtip, we show you how to install and calibrate the single cantilever clamp for the new Discovery DMA 850

The post Single Cantilever Installation & Calibration – DMA 850 first appeared on TA仪器.

Three Point Bend Clamp Installation & Calibration for the DMA850

Juli Varvarezis — Thu, 13 Mar 2025 21:01:15 +0000

In this TA TechTip, we walk through the proper steps for installation and calibration of the three point bending clamp for the Discovery DMA850

The post Three Point Bend Clamp Installation & Calibration for the DMA850 first appeared on TA仪器.

Penetration Clamp Installation & Calibration on the Discovery DMA 850

Juli Varvarezis — Wed, 12 Mar 2025 17:47:10 +0000

The post Penetration Clamp Installation & Calibration on the Discovery DMA 850 first appeared on TA仪器.

Fiber Clamp Calibration on the Discovery DMA 850

Juli Varvarezis — Wed, 12 Mar 2025 17:29:43 +0000

In this Tech Tip, we will install and calibrate the DMA 850 fiber clamp.

The post Fiber Clamp Calibration on the Discovery DMA 850 first appeared on TA仪器.

Shear Sandwich Clamp Installation & Calibration for the Discovery DMA 850

Juli Varvarezis — Wed, 12 Mar 2025 17:26:42 +0000

In this special TechTip Wednesday, we discuss the proper steps for installing and calibrating the shear sandwich clamp for the Discovery DMA 850 dynamic mechanical analyzer from TA Instruments!

The post Shear Sandwich Clamp Installation & Calibration for the Discovery DMA 850 first appeared on TA仪器.

Film Tension Clamp Installation & Calibration for the Discovery DMA 850

Juli Varvarezis — Wed, 12 Mar 2025 17:09:30 +0000

In this TA TechTip we will demonstrate how to properly install and calibrate the Film Tension Clamp on the Discovery DMA 850 dynamic mechanical analyzer.

Need the latest version of TRIOS? Head over to our software page to download the most recent version!

DMA 850 Product Page

The post Film Tension Clamp Installation & Calibration for the Discovery DMA 850 first appeared on TA仪器.

Installing and Calibrating the Rheo-Impedance Spectroscopy Accessory for HR Rheometers

Juli Varvarezis — Thu, 18 Jul 2024 18:48:56 +0000

Overview

In this Tech Tip, we will install and calibrate the TA Instruments Rheo-Impedance Spectroscopy Accessory for HR Rheometers.

The post Installing and Calibrating the Rheo-Impedance Spectroscopy Accessory for HR Rheometers first appeared on TA仪器.