In this TA TechTip, we walk through the proper steps for installation and calibration of the three point bending clamp for the Discovery DMA850

概述

在本技术技巧中，我们将展示如何制备可在TGA Smart-Seal样品盘中使用的样品

Overview

TA Instruments – Waters Corporation’s state-of-the-art LED Photocalorimeter Accessory (LED-PCA) allows for the comprehensive study and characterization of photocurable materials across a broad temperature spectrum.

Overview

In this Tech Tip, we will install the new Photocalorimeter Accessory (LED-PCA) on the Discovery DSC.

Overview

In this Tech Tip, we will show you how to add a calibration standard to TRIOS software.

Calibrations are obtained by comparing the literature values of known standards to the measured ones in the calibration experiment. Standards’ melting, curie, Cp, and CTE values are used for different calibrations on thermal instruments. Here we will show you how to edit or add temperature and heat capacity standards to Discovery DSC. Calibration standards on other thermal instruments can be added in the same manner.