零件及配件信息：
| P/N: | Product Description | Product Category | Product Family |
|---|---|---|---|
| 972503.901 | Discovery Finned Air Cooling System (FACS)Note: For programmed air cooling of the Discovery DSC cell from 725 °C to ambient temperature. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 970036.901 | Quench Cooling Can for FACS (Q and Discovery Series, also suitable for use with the Tzero Pressure DSC Cell (P/N: 970900.901))Note: Assists the FACS in rapid cooling of DSC cell to ambient temperature and can be used for sub-ambient operation when used with the DSC 25P. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 970347.901 | Quench Cooling Accessory (QCA) for the Q & Discovery DSCsNote 1: Temperature range of -180 °C to 550 °C.Note 2: For quench cooling of autosampler-enabled Q Series DSCs the following parts are also required: P/N: 970282.001 Inner Manual Lid, P/N: 970283.001 Outer Manual Lid, and P/N: 970284.901 Manual Cell Cover.Note 3: For quench cooling of autosampler-enabled Discovery DSCs, the following parts are also required: P/N: 973061.903 Manual Insulated Cover and 973252.001 Manual Silver Lid. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 972507.901 | Discovery Refrigerated Cooling System - RCS40 (120VAC/60Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 972507.902 | Discovery Refrigerated Cooling System - RCS40 (230VAC/50Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 972007.901 | Discovery Refrigerated Cooling System - RCS90 (120VAC/60Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 972007.902 | Discovery Refrigerated Cooling System - RCS90 (230VAC/50Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 973757.901 | Discovery Refrigerated Cooling System - RCS120 (220-230VAC/60Hz)Note: For use with X3 DSC, Discovery DSC 25, DSC 250, and DSC 2500 only. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 973757.902 | Discovery Refrigerated Cooling System - RCS120 (220-230VAC/50Hz)Note: For use with X3 DSC, Discovery DSC 25, DSC 250, and DSC 2500 only. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 973900.901 | Discovery LN PumpNote: For use with X3 DSC, DSC 25, DSC 250, DSC 2500, and first generation Discovery DSC. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 200266.001 | RCS DryerNote: For removal of trace moisture in purge gases when operating the DSC at sub-zero temperatures. Assembly provides dry gas to -90 °C dew point. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 970425.901 | LN Pump DSC Purge Gas Purifier UnitNote: For removal of trace moisture in purge gases. Includes gas dryer unit and appropriate shut-off and bypass valving. Assembly provides dry gas to -180 °C dew point. | Discovery Series DSC Cooling Accessories | Thermal Analysis |
| 973850.901 | Discovery DSC Microscope Accessory | Discovery Series DSC Accessories | Thermal Analysis |
| 973011.901 | Accessory Kit, Discovery DSC 25/250/2500 | Discovery Series DSC Accessories | Thermal Analysis |
| 973721.901 | Accessory Kit, Discovery DSC 25P | Discovery Series DSC Accessories | Thermal Analysis |
| 972011.901 | Accessory Kit, Discovery DSCNote: For first generation Discovery DSC ONLY. | Discovery Series DSC Accessories | Thermal Analysis |
| 915064.901 | MDSC Thermal Conductivity Kit | Discovery Series DSC Accessories | Thermal Analysis |
| 915068.901 | Vial Silicone Oil | Discovery Series DSC Accessories | Thermal Analysis |
| 972500.901 | Discovery DSC Replacement CellNote: For first generation Discovery DSC ONLY. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 973400.901 | Discovery DSC 25, 250, 2500 Replacement Cell | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 973767.901 | Discovery X3 DSC Replacement Cell | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 251471.002 | DSL Router with 4-Port SwitchNote: For communication between an external controller and Thermal/Rheology instruments. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 203599.901 | Universal AC Adapter Kit for DSL RouterNote: Kit contains power adapters required to use the DSL Router with 4-Port Switch (PN 251471.002) with local power outlet types outside the United States. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 973475.001 | Discovery DSC 25/250/2500 Autosampler TrayNote: Replacement autosampler tray. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 973474.001 | Discovery DSC 25P Manual Sample TrayNote: Replacement manual sample tray. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 973061.903 | Manual Insulated Cell Cover (Non-Autosampler, All Discovery DSCs) | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 973252.001 | Manual Inner Silver Lid (Non-Autosampler, All Discovery DSCs) | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 200245.001 | Pressure Regulator (North America use only)Note: For use with the RCS Dryer or the LNCS Purge Gas Purifier Unit; 4000 psi input; 40 psi output; CGA. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 972628.001 | Discovery DSC Rhodium-Plated Silver Inner Lid, Autosampler enabledNote: Maximum temperature limit of 400 °C. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 972628.002 | Discovery DSC Silver Inner Lid, Autosampler enabledNote: Maximum temperature limit of 725 °C. | Discovery Series DSC Replacement Parts | Thermal Analysis |
| 973421.901 | Replacement Cell, Discovery DSC 25P | Discovery DSC 25P Pressure Accessories | Thermal Analysis |
| 970916.001 | Upper Silver Lid, Discovery DSC 25P | Discovery DSC 25P Pressure Accessories | Thermal Analysis |
| 973706.001 | Inner Silver Lid, Discovery DSC 25P | Discovery DSC 25P Pressure Accessories | Thermal Analysis |
| 970036.901 | Quench Cooling Can for FACSNote 1: Suitable for the Q & Discovery DSCs, and the Tzero Pressure DSC Cell (P/N: 970900.901).Note 2: Assists the FACS in rapid cooling of DSC cell to ambient temperature and can be used for sub-ambient operation when used with the DSC 25P. | Discovery DSC 25P Pressure Accessories | Thermal Analysis |
| 206455.901 | OmniCure® LX500 UV LED Spot Curing System Controller - 2 channel configuration.Note: For LED-PCA to generate the light pulse. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 974020.901 | TA KIT UV-LED ADAPTERNote: Includes the following: adaptor base, quartz window, light guide, lids, lenses, and neutral density filters. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 974022.901 | LX500 365nm x 125mm UV HEAD HDMI V3 KITNote: Quantity of 2. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 974023.901 | LX500 385nm x 125mm UV HEAD HDMI V3 KITNote: Quantity of 2. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 974024.901 | LX500 395nm x 125mm UV HEAD HDMI V3 KITNote: Quantity of 2. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 974025.901 | LX500 405nm x 125mm UV HEAD HDMI V3 KITNote: Quantity of 2. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 206440.001 | 8mm Focusing Lens for Led HeadsNote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935043.901 | 10% Filter, Neutral DensityNote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935036.901 | Coupling Dual Light Guide AssyNote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935042.001 | Spanner WrenchNote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935010.901 | Adapter Base Mtg PCANote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 280255.003 | Tool Wrench Hex 7/64 L BalldvrNote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 265981.001 | Wrench Allen .050 Ball EndNote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 201262.002 | Set Screw Nylon Tip 4-40 X 1/8" SSTNote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935050.001 | Adapter Discovery PCANote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935034.901 | Manual Cell Cover PCANote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 973252.001 | Silver Lid-Manual DSC25/250Note: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935007.901 | Window UV Quartz W/3 Holes PCANote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 973081.901 | Inner Lid PCANote: This Spare Part is included in Part Number 974020.901 (TA KIT UV-LED ADAPTER). | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935000.901 | Photocalorimeter Accessory (PCA) with UV Light SourceNote 1: For use with the Discovery DSC 250, 2500, first generation Discovery DSC and Q2000/Q200 DSC modules to provide photocuring studies between -50 °C and 250 °C. Cannot be used together with the LNCS or LN Pump. Includes a 320 - 500 nm internal filter.Note 2: Part number 206222.001, External PLC Adaptor for Elite S2000 is required for triggering the PCA unit. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935002.902 | Accessory Kit, Photocalorimeter Accessory (PCA) (replacement only)Note: TA-supplied items required for PCA operation by Q Series DSC users who already have, or will separately obtain, the Novacure 2100 analyzer and appropriate dual light guide. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935002.903 | Accessory Kit, Photocalorimeter Accessory (PCA) (replacement only for the Q200, Q2000, DSC 250, DSC 2500 and first generation Discovery DSC)Note: TA-supplied items required for photocalorimeter operation by customer who already has, or will separately obtain, the Omnicure S-2000 analyzer and appropriate dual light guide. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935012.002 | Dual Quartz Light Guide for PCA (-50 °C to 250 °C operation)Note: Requires RCS for subambient use. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935012.001 | Dual Liquid Light Guide for PCA (-50 °C to 80 °C operation)Note: Requires RCS for subambient use. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 972734.901 | Discovery PCA Trigger Adapter: an adapter to convert USB communication from the first generation Discovery DSC to RS232 communication for the PCANote: This adapter is required for the first generation Discovery DSC to communicate with the PCA and should be added to PCA orders for the Discovery DSC. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 206222.001 | External PLC Adaptor for Elite S2000 PCANote: Required for triggering the Omnicure S2000 Elite PCA. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935014.901 | PCA/UV External Filter Adapter Accessory KitNote: Allows use of external filters with the PCA - P/N: 935000.901. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935009.005 | PCA Blank Filter HolderNote: For the Omnicure S-2000 with external filter adapter. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935009.001 | PCA Filter, External, 320 - 480 nmNote: For the Omnicure S-2000 with external filter adapter. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935009.002 | PCA Filter, External, 320 - 390 nmNote: For the Omnicure S-2000 with external filter adapter. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935009.004 | PCA Filter, External, 400 - 500 nmNote: For the Omnicure S-2000 with external filter adapter. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935009.003 | PCA Filter, External, 365 nmNote: For the Omnicure S-2000 with external filter adapter. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935013.001 | PCA Air Filter Kit (pkg. of 10) | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935019.901 | PCA Longpass Filter, 490 nm (pkg. of 2) | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935015.901 | PCA Filter, Neutral Density, 1% | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935016.901 | PCA Filter, Neutral Density, 10% | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935021.001 | Lamp, 100 W, Mercury (for the Novacure 2100) | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935021.002 | Lamp, 200 W, Mercury (for the Omincure S-2000) | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935051.901 | Universal Optical Accessory Kit | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 200700.001 | Radiometer (R2000) (for use with either PCA) | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 935050.001 | Adaptor Ring Discovery PCANote: Used to hold the PCA dual light guide adaptor on Discovery 1st generation and Discovery 2500/250 units. | Discovery DSC and QDSC Photocalorimeter Accessories and Parts | Thermal Analysis |
| 901600.901 | Tzero Sample Press and Die Sets KitNote: Includes a Tzero Press and die sets for Tzero Pans/Tzero Lids and Tzero Low-Mass Pans/Tzero Lids; Tzero Pans/Tzero Hermetic Lids; and Standard Aluminum Pans/Lids; Standard Hermetic Pans/Lids, respectively. The kit also includes one box each of Tzero Pans (100) and Tzero Lids (100). | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901608.901 | DSC Standard Die Set (GREEN color)Note: For use in the Tzero Sample Press. | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901608.902 | DSC Hermetic Die Set (WHITE color)Note: For use in the Tzero Sample Press. | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901608.903 | DSC Tzero Die Set (BLACK color)Note: For use in the Tzero Sample Press. | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901608.904 | DSC Tzero Hermetic Die Set (BLUE color)Note: For use in the Tzero Sample Press. | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901608.905 | DSC High Volume Die Set (YELLOW color)Note: For use with the Tzero Sample Press and standard series high volume pans and lids. | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 973727.901 | DSC Sample Cutting Kit | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 972800.901 | Tzero Powder Sample Preparation Kit | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901670.901 | Tzero Low-Mass Pans (pkg. of 100) | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901671.901 | Tzero Lids (pkg. of 100) | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901683.901 | Tzero Pans (pkg. of 100) | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901684.901 | Tzero Hermetic Lids (pkg. of 100) | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901685.901 | Tzero Hermetic Pinhole Lid (75 micron diameter pinhole) (pkg. of 50) | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901697.901 | Tzero Alodined Pans (pkg. of 100) | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 901698.901 | Tzero Hermetic Alodined Lids (pkg. of 100) | Tzero DSC Sample Press and Die Sets/Sample Pans and Lids | Thermal Analysis |
| 900760.901 | Classic Aluminum Pans, DSC (pkg. of 200)Note 1: Higher sidewall compared to standard aluminum sample pans.Note 2: These pans will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900786.901 | Standard Aluminum Pans, DSC (pkg. of 200)Note: These pans will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900779.901 | Standard Aluminum Lids, DSC (pkg. of 200)Note: These lids will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900793.901 | Standard Aluminum Hermetic Pans, DSC (pkg. of 200)Note: These pans will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900794.901 | Standard Aluminum Hermetic Lids, DSC (pkg. of 200)Note: These lids will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900860.901 | Aluminum Hermetic Lids with Pinhole, DSC (pkg. of 50) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900796.901 | Standard Coated Aluminum Hermetic Pans, DSC (pkg. of 200)Note: These pans will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900790.901 | Standard Coated Aluminum Hermetic Lids, DSC (pkg. of 200)Note: These lids will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900803.901 | DSC High Temperature/High Pressure Pan Kit Note: Includes crimping tool, 5 reusable capsules, and 20 seals. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900812.901 | DSC High Temperature/High Pressure Pans (pkg. of 5) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900811.901 | DSC High Temperature/High Pressure Seals (pkg. of 20) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900825.901 | High Volume DSC Sample Pan KitNote: Includes high volume die sets for Tzero and older Standard Press plus 100 each pans, lids, and seals. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900825.902 | High Volume DSC Sample Pans, Lids, and Seals (pkg. of 100) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900824.901 | High Volume DSC Sample Pan Die Set (for Standard DSC Press) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900870.901 | Aluminum DSC Sample Pans for SFI Samples (pkg. of 200) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900867.901 | Copper Sample Pans, DSC (pkg. of 200) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900866.901 | Gold Sample Pans, DSC (pkg. of 10)Note: These pans will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900868.901 | Gold Lids, DSC (pkg. of 10)Note: These lids will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900871.901 | Gold Sample Pans, Hermetic, DSC (pkg. of 10)Note: These pans will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900872.901 | Gold Lids, Hermetic, DSC (pkg. of 10)Note: These lids will work with either the Tzero or Standard DSC Press. | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900874.901 | Graphite Sample Pans, DSC (pkg. of 10) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900873.901 | Graphite Lids, DSC (pkg. of 10) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 900578.901 | Platinum Sample Pans, DSC (pkg. of 10) | Standard Series DSC Sample Pans and Lids | Thermal Analysis |
| 970345.901 | Kit, Tzero Calibration, Sapphire | DSC Calibration Materials | Thermal Analysis |
| 970370.901 | Kit, MDSC Calibration, Sapphire | DSC Calibration Materials | Thermal Analysis |
| 915060.901 | DSC/DTA Certified Temperature Calibration Kit | DSC Calibration Materials | Thermal Analysis |
| 915061.901 | Replacement Certified Indium Reference MaterialNote: For the DSC / DTA Certified Temperature Calibration Kit (P/N: 915060.901). | DSC Calibration Materials | Thermal Analysis |
| 900902.901 | Indium Calibration Material (not certified) | DSC Calibration Materials | Thermal Analysis |
| 900910.901 | Tin Calibration Material (not certified) | DSC Calibration Materials | Thermal Analysis |
| 900907.901 | Zinc Calibration Material (not certified) | DSC Calibration Materials | Thermal Analysis |
| 915079.902 | Sapphire Specific Heat Material (0.13 inch OD x 0.020 inch height)Note: Compatible with all DSC and SDT Pans. | DSC Calibration Materials | Thermal Analysis |
| 915079.901 | Sapphire Specific Heat Material (0.16 inch OD x 0.020 inch height)Note: Compatible with all pans except Standard Series Hermetic PansP/N: 900793.901; P/N: 900796.901; P/N: 900871.901. | DSC Calibration Materials | Thermal Analysis |
| 915079.903 | Sapphire Specific Heat Material (0.187 inch OD x 0.034 inch height, for DSC standard sample pans)Note: Compatible with all pans except Standard Series Hermetic PansP/N: 900793.901; P/N: 900796.901; P/N: 900871.901. | DSC Calibration Materials | Thermal Analysis |
| 970489.901 | Adamantane Traceable Temperature and Enthalpy Calibration Material | DSC Calibration Materials | Thermal Analysis |
| 970020.901 | Q2000/Q1000 Replacement Cell | QDSC Accessories | Thermal Analysis |
| 970520.901 | Q200/Q20/AQ20/Q100/Q10 Replacement CellNote: Requires separately priced installation by a TA Field Service Engineer. | QDSC Accessories | Thermal Analysis |
| 970037.901 | Q Series Finned Air Cooling System (FACS)Note: For programmed air cooling of Q Series DSC Cell from 725 °C to ambient temperature. | QDSC Accessories | Thermal Analysis |
| 970036.901 | Quench Cooling Can for FACSNote 1: Also suitable for use with the Tzero Pressure DSC Cell (P/N: 970900.901).Note 2: Assists the FACS in rapid cooling of DSC cell to ambient temperature and can be used for sub-ambient operation when used with the DSC 25P. | QDSC Accessories | Thermal Analysis |
| 970347.901 | Quench Cooling Accy (QCA) for the Q Series & Discovery DSCs (DSC 2500,250,25)Note 1: Temperature range of -180 °C to 550 °C.Note 2: For quench cooling of autosampler-enabled Q Series DSCs the following parts are also required: P/N: 970282.001 Inner Manual Lid, P/N: 970283.001 Outer Manual Lid, and P/N: 970284.901 Manual Cell Cover.Note 3: For quench cooling of autosampler-enabled Discovery DSCs, the following parts are also required: P/N: 973061.903 Manual Insulated Cover and 973252.001 Manual Silver Lid. | QDSC Accessories | Thermal Analysis |
| 972507.901 | Discovery Refrigerated Cooling System - RCS40 (120VAC/60Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | QDSC Accessories | Thermal Analysis |
| 972507.902 | Discovery Refrigerated Cooling System - RCS40 (230VAC/50Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | QDSC Accessories | Thermal Analysis |
| 972007.901 | Discovery Refrigerated Cooling System - RCS90 (120VAC/60Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | QDSC Accessories | Thermal Analysis |
| 972007.902 | Discovery Refrigerated Cooling System - RCS90 (230VAC/50Hz)Note: For use with X3 DSC, Discovery Series and Q Series DSC instruments. | QDSC Accessories | Thermal Analysis |
| 970425.901 | LNCS DSC Purge Gas Purifier UnitNote: For removal of trace moisture in purge gases. Includes gas dryer unit and appropriate shut-off and bypass valving. | QDSC Accessories | Thermal Analysis |
| 200245.001 | Pressure Regulator (North America use only)Note: For use with the RCS Dryer or the LNCS Purge Gas Purifier Unit; 4000 psi input, 40 psi output; CGA. | QDSC Accessories | Thermal Analysis |
| 200266.001 | RCS DryerNote: For removal of trace moisture in purge gases. | QDSC Accessories | Thermal Analysis |
| 970282.001 | Inner Silver Manual Lid, Q Series DSC | QDSC Accessories | Thermal Analysis |
| 970283.001 | Outer Silver Manual Lid , Q Series DSC | QDSC Accessories | Thermal Analysis |
| 970284.901 | Manual Insulated Cell Cover, Q Series DSC | QDSC Accessories | Thermal Analysis |
| 970906.901 | Tzero Pressure Cell Accessory KitNote: Required for installation of Tzero Pressure Cell (P/N: 970900.901) on a Q2000 DSC module. This kit is included within the Q Series PDSC Cell Shipping Accessory Kit (P/N: 970814.901). | QDSC Accessories | Thermal Analysis |
| 970814.901 | Q Series PDSC Cell Shipping Accessory KitNote: For use with the Tzero Pressure DSC Cell (P/N: 970900.901) on a Q2000 DSC module. Includes Tzero Pressure Cell Accessory Kit (P/N: 970906.901). | QDSC Accessories | Thermal Analysis |
| 915064.901 | MDSC Thermal Conductivity Kit | QDSC Accessories | Thermal Analysis |
| 915068.901 | Vial Silicone Oil | QDSC Accessories | Thermal Analysis |
| 970442.001 | Inner Silver Lid (replacement part for QDSC Autolids II) | QDSC Accessories | Thermal Analysis |
| 970464.001 | Outer Silver Lid (replacement part for QDSC Autolids II) | QDSC Accessories | Thermal Analysis |
| 970441.001 | Lift Rod (replacement part for QDSC Autolids II) | QDSC Accessories | Thermal Analysis |
| 971126.901 | DSC Autosampler Tray (replacement, Q Series) | QDSC Accessories | Thermal Analysis |
| 963313.901 | Blending Gas Delivery ModuleNote: For Discovery TGA 5500, TGA 550, SDT 650, or SA. | Discovery Series TGA Accessories | Thermal Analysis |
| 954160.903 | Four-Channel Gas Delivery Module (GDM) for Discovery TGA First Generation Only | Discovery Series TGA Accessories | Thermal Analysis |
| 534910.901 | TGA Glovebox Adaptor Kit for Discovery TGANote: If the glovebox kit is offered as accessory for an existing TGA, part number 999800.528 covering for the installation of the existing TGA in a glovebox must be included in the quote. | Discovery Series TGA Accessories | Thermal Analysis |
| 206373.001 | 120V UPS required for operation of TGA in Ar-glovebox | Discovery Series TGA Accessories | Thermal Analysis |
| 206373.002 | 220 -240V UPS required for operation of TGA in Ar-glovebox | Discovery Series TGA Accessories | Thermal Analysis |
| 956550.901 | Advance Technique Field Upgrade on the Discovery TGA 550Note: The upgrade includes High Resolution (HiRes™) TGA, Modulated TGA (MTGA®) and a DTA signal. | Discovery Series TGA Accessories | Thermal Analysis |
| 956011.911 | Accessory Kit, Discovery TGA 55/550 | Discovery Series TGA Accessories | Thermal Analysis |
| 956011.901 | Accessory Kit, Discovery TGA 5500 | Discovery Series TGA Accessories | Thermal Analysis |
| 954011.901 | Accessory Kit, Discovery TGA (First Generation) | Discovery Series TGA Accessories | Thermal Analysis |
| 251471.002 | DSL Router with 4-Port SwitchNote: For communication between an external controller and Thermal/Rheology instruments. | Discovery Series TGA Accessories | Thermal Analysis |
| 203599.901 | Universal AC Adapter Kit for DSL RouterNote: Kit contains power adapters required to use the DSL Router with 4-Port Switch (PN 251471.002) with local power outlet types outside the United States. | Discovery Series TGA Accessories | Thermal Analysis |
| 200245.001 | Pressure Regulator (North America use only)Note: For use with the RCS Dryer or the LNCS Purge Gas Purifier Unit; 4000 psi input, 40 psi output; CGA. | Discovery Series TGA Accessories | Thermal Analysis |
| 957349.901 | Discovery TGA 5500, Discovery TGA (first generation), or Q5000 IR MassSpectrometer Interface Kit (without NIST library) | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 271001.002 | Discovery TGA 550/55, Q500/50 Mass Spectrometer Interface Kit (without NIST library) | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 271002.002 | Discovery SDT and Q600 Mass Spectrometer Interface Kit (without NIST library) | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 963560.901 | SDT/FTIR Transfer Line Support Bracket (3 Inch Diameter)Note: This Bracket supports the Transfer Line to a ThermoNicolet Gas Cell. | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 963560.902 | SDT/FTIR Transfer Line Support Bracket (2 Inch Diameter)Note: This Bracket supports the Transfer Line to a ThermoNicolet Gas Cell. | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 271003.001 | Wiley/NIST Mass Spectrometer LibraryNote: OEM product. | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 957468.901 | FTIR Adaptor KitNote: For use with Discovery TGA 5500, Discovery TGA (first generation), or Q5000 IR. | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 957481.901 | Event Cable, Thermo Nicolet 6700, iS10, iS20 FTIR | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 957574.901 | Dual MS/FTIR Interface Kit for Discovery TGAs or Q5000 IRNote: For use with TGA/MS Interface Kit, P/N: 957349.901. | OEM Instruments and Accessories - Mass Spectrometer and FTIR | Thermal Analysis |
| 957329.903 | Ceramic Sample Pans, TGA, 100 μL (pkg. of 3) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957329.904 | Ceramic Sample Pans, TGA, 250 μL (pkg. of 3) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957207.903 | Platinum Sample Pans, TGA, 50 μL (pkg. of 3) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957207.904 | Platinum Sample Pans, TGA, 100 μL (pkg. of 3) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957571.901 | Platinum - HT Sample Pans, TGA, 100 μL (pkg. of 3) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957363.901 | Aluminum Sample Pans, TGA, 80 μL (pkg. of 100) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957362.901 | Aluminum Lids, TGA, (pkg. of 100) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957364.901 | Stainless Steel Bail, TGA, (pkg. of 15) | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957210.902 | Quartz Sample Pans (pkg. of 3)Note: Requires Autosampler Tray (P/N: 957216.901). | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957352.901 | TGA Sealed Aluminum Pan KitNote 1: For use with TGA 5500/550, Discovery TGA & Q5000 IR.Note 2: Consists of 100 pans, 100 lids, 30 bails, punch alignment tool, and dies for use with the Tzero and older standard presses. | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957540.901 | TGA Sealed Aluminum Die Set for Tzero PressNote: For use with the Tzero Press and the Sealed Aluminum Pan Kit P/N: 957352.901. | Discovery TGA (55/550/5500), Q5000 IR, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 952541.902 | TGA ICTAC Curie Point Reference Materials KitNote 1: For use with DTGA 5500, DTGA (First Generation) & Q5000 IR.Note 2: Includes 0.5 gram each of the six ICTAC certified materials. | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952541.901 | TGA/SDT ICTAC Curie Point Reference Materials Kit with MagnetNote 1: For use with DTGA 550/55, Q50/500, & Q600.Note 2: Includes 0.5 gram each of the six ICTAC certified materials. | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952500.901 | Replacement ICTAC Certified Curie Point Reference Material 153 °C | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952504.901 | Replacement ICTAC Certified Curie Point Reference Material 357 °C | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952508.901 | Replacement ICTAC Certified Curie Point Reference Material 554 °C | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952512.901 | Replacement ICTAC Certified Curie Point Reference Material 746 °C | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952516.901 | Replacement ICTAC Certified Curie Point Reference Material 931 °C | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952520.901 | Replacement ICTAC Certified Curie Point Reference Material 1116 °C | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952384.901 | TGA/SDT Temperature Calibration KitNote: Alumel and Nickel Reference Materials. | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952385.901 | Replacement Certified Nickel Reference Material (for kit P/N: 952384.901) | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 952398.901 | Replacement Certified Alumel Reference Material (for kit P/N: 952384.901) | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 269931.001 | 100 mg Class 1 Precision Weight for TGA Weight Calibration | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 269931.002 | 1 gram Class E2 Precision Weight for TGA Weight Calibration | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 900905.901 | Calcium Oxalate Monohydrate (1 gram) | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 957341.901 | TGA Weight Set (Calibrated)Note: For use only with Q5000IR, Q5000SA or Discovery TGA. | Discovery TGA/Q5000/Q500/Q50/SDT Calibration and Test Materials | Thermal Analysis |
| 954298.901 | Thermocouple Replacement Kit for lower furnace assembly (TGA 5500 only) | Discovery TGA Replacement Parts | Thermal Analysis |
| 956075.901 | EGA Furnace, Discovery TGA 550/55 | Discovery TGA Replacement Parts | Thermal Analysis |
| 956070.901 | Standard 1000°C Furnace, Discovery TGA 550/55 | Discovery TGA Replacement Parts | Thermal Analysis |
| 956291.901 | Discovery TGA 5500 Upper Reflector Assembly | Discovery TGA Replacement Parts | Thermal Analysis |
| 956080.901 | Discovery TGA 5500 IR Furnace | Discovery TGA Replacement Parts | Thermal Analysis |
| 956312.901 | Punch Assembly, Discovery TGA 550 (Autosampler required) | Discovery TGA Replacement Parts | Thermal Analysis |
| 956210.901 | Themocouple Sample TGA 550/55Note: Part is also the DTA thermocouple for the Discovery 5500. | Discovery TGA Replacement Parts | Thermal Analysis |
| 956328.901 | Hangdown Hook, Tare TGA 5500/550/55 | Discovery TGA Replacement Parts | Thermal Analysis |
| 956327.901 | Hangdown Hook, Sample TGA 5500/550/55 | Discovery TGA Replacement Parts | Thermal Analysis |
| 957515.901 | Loop Decoupler KitNote: For use with all Discovery TGA’s & Q5000 IR. | Discovery TGA Replacement Parts | Thermal Analysis |
| 953260.901 | TGA Heat ExchangerNote 1: For use with all Discovery & Q TGA’s.Note 2: Requires TGA Heat Exchanger Harness (P/N: 953176.901) for connection to the TGA Instrument. | Discovery TGA Replacement Parts | Thermal Analysis |
| 953176.901 | TGA Heat Exchanger HarnessNote: For use with the TGA Heat Exchanger (P/N: 953260.901). | Discovery TGA Replacement Parts | Thermal Analysis |
| 952377.901 | Heat Exchanger Conditioning Kit (fungicide) | Discovery TGA Replacement Parts | Thermal Analysis |
| 952394.901 | Sample Nickel Wire (not certified) | Discovery TGA Replacement Parts | Thermal Analysis |
| 957250.901 | Discovery TGA/Q5000 IR Autosampler Dust Cover with Light Guard | Discovery TGA Replacement Parts | Thermal Analysis |
| 957082.901 | Hangdown WireNote: Sample Wire for Q5000 IR/Q5000 SA/Discovery TGA; Tare Wire for Q5000 SA. | Discovery TGA Replacement Parts | Thermal Analysis |
| 952040.901 | Hangdown WireNote: Tare Wire for Q5000 IR and Discovery TGA; Sample Wire for Q500/Q50. | Discovery TGA Replacement Parts | Thermal Analysis |
| 957381.001 | Tube Load Q5000 IR Sample | Discovery TGA Replacement Parts | Thermal Analysis |
| 957381.002 | Tube Load Q5000 IR Reference | Discovery TGA Replacement Parts | Thermal Analysis |
| 954399.901 | Discovery TGA/Q5000 IR TGA Lower Furnace Assembly | Discovery TGA Replacement Parts | Thermal Analysis |
| 957216.901 | Tray Autosampler TGA - 10-positionNote: Standard with Q5000 SA; option for Discovery TGA and Q5000 IR with Quartz Crucibles. | Discovery TGA Replacement Parts | Thermal Analysis |
| 957099.901 | Tray Autosampler TGA (TGA 550/5500, DTGA, Q5000 IR TGA) - 25-positionNote: For use with platinum, ceramic, and aluminum sample pans. | Discovery TGA Replacement Parts | Thermal Analysis |
| 957352.901 | TGA Sealed Aluminum Pan KitNote 1: For use with TGA 5500/550, Discovery TGA & Q5000 IR.Note 2: Consists of 100 pans, 100 lids, 30 bails, punch alignment tool, and dies for use with the Tzero and older standard presses. | Discovery TGA Replacement Parts | Thermal Analysis |
| 957540.901 | TGA Sealed Aluminum Die Set for Tzero PressNote: For use with the Tzero Press and the Sealed Aluminum Pan Kit P/N: 957352.901. | Discovery TGA Replacement Parts | Thermal Analysis |
| 953046.901 | Evolved Gas Furnace (EGA), Q500/Q50Note: Recommended for evolved gas analysis with a MS or FTIR. | QTGA Thermogravimetric Analyzer Accessories | Thermal Analysis |
| 957352.901 | TGA Sealed Aluminum Pan KitNote 1: For use with TGA 5500/550, Discovery TGA & Q5000 IR.Note 2: Consists of 100 pans, 100 lids, 30 bails, punch alignment tool, and dies for use with the Tzero and older standard presses. | QTGA Thermogravimetric Analyzer Accessories | Thermal Analysis |
| 957540.901 | TGA Sealed Aluminum Die Set for Tzero PressNote: For use with the Tzero Press and the Sealed Aluminum Pan Kit P/N: 957352.901. | QTGA Thermogravimetric Analyzer Accessories | Thermal Analysis |
| 953350.901 | Upgrade Kit, Q Series TGA High ResolutionNote: Upgrades a Q500 for High Resolution operation. | QTGA Thermogravimetric Analyzer Accessories | Thermal Analysis |
| 953450.901 | Upgrade Kit, Q Series Modulated TGANote: Upgrades a Q500 for Modulated TGA operation. | QTGA Thermogravimetric Analyzer Accessories | Thermal Analysis |
| 952323.902 | Aluminum Sample Pans, 100 μL, Q500/50 TGA (pkg. of 12)Note: Also suitable for use with the TGA-HP and VTI-SA Sorption Analyzers. | TGA Q500/Q50, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 952018.907 | Ceramic Sample Pans, 100 μL, Q500/50 TGA (pkg. of 3)Note: Also suitable for use with the TGA-HP and VTI-SA Sorption Analyzers. | TGA Q500/Q50, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 952018.909 | Ceramic Sample Pans, 250 μL, Q500/50 TGA (pkg. of 3)Note: Also suitable for use with the TGA-HP and VTI-SA Sorption Analyzers. | TGA Q500/Q50, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 952018.910 | Ceramic Sample Pans, 500 μL, Q500/50 TGA (pkg. of 3)Note: Also suitable for use with the TGA-HP and VTI-SA Sorption Analyzers. | TGA Q500/Q50, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 952018.908 | Platinum Sample Pans, 50 μL, Q500/50 TGA (pkg. of 3)Note: Also suitable for use with the TGA-HP and VTI-SA Sorption Analyzers. | TGA Q500/Q50, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 952018.906 | Platinum Sample Pans, 100 μL, Q500/50 TGA (pkg. of 3)Note: Also suitable for use with the TGA-HP and VTI-SA Sorption Analyzers. | TGA Q500/Q50, TGA-HP, and VTI-SA Sorption Analyzers Sample Pans | Thermal Analysis |
| 957515.901 | Loop Decoupler KitNote: For use with all Discovery TGA’s & Q5000 IR. | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 953260.901 | TGA Heat ExchangerNote 1: Requires TGA Heat Exchanger Harness (P/N: 953176.901) for connection to the TGA Instrument.Note 2: For use with all Discovery & Q TGA’s. | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 953176.901 | TGA Heat Exchanger HarnessNote: For use with the TGA Heat Exchanger (P/N: 953260.901). | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 952377.901 | Heat Exchanger Conditioning Kit (fungicide) | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 952394.901 | Sample Nickel Wire (not certified) | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 957202.001 | Crimping Die SetNote: For use with older standard press. | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 957250.901 | Discovery TGA/Q5000 IR Autosampler Dust Cover with Light Guard | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 957082.901 | Hangdown WireNote: Sample Wire for Q5000 IR/Q5000 SA/Discovery TGA; Tare Wire for Q5000 SA. | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 952040.901 | Hangdown WireNote: Tare Wire for Q5000 IR and Discovery TGA; Sample Wire for Q500/Q50. | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 957381.001 | Tube Load Q5000 IR Sample | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 957381.002 | Tube Load Q5000 IR Reference | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 954399.901 | Discovery TGA/Q5000 IR TGA Lower Furnace Assembly | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 957216.901 | Tray Autosampler TGA - 10-positionNote: Standard with Q5000 SA; option for Discovery TGA and Q5000 IR with Quartz Crucibles. | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 957099.901 | Tray Autosampler TGA (TGA 550/5500, DTGA, Q5000 IR TGA) - 25-positionNote: For use with platinum, ceramic, and aluminum sample pans. | TGA Q5000 IR Replacement Parts | Thermal Analysis |
| 952040.901 | Hangdown WireNote: Tare Wire for Q5000 IR and Discovery TGA; Sample Wire for Q500/Q50. | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 952040.902 | Tare Hangdown Wire, Q500/50 TGA | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 952040.903 | Tare Hangdown Wire - ShortNote: For use in the latest TGA Q500/Q50 without a Tare Access Cover. | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 952110.001 | Sample Hangdown Wire Tube, Q500/50 TGA | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 952256.901 | Kapton Hangdown Loop, Q500/50 TGA (strip of 10) | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 953208.901 | Sample Thermocouple for QTGA | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 952240.901 | Auto TGA Q500 Multiple Sample Tray KitNote: Includes three additional sample trays. | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 952434.901 | Furnace Tube (quartz) with Seal Kit and Instructions for the EGA Furnace | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 953032.901 | Replacement TGA Q500/Q50 Furnace | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 953260.901 | TGA Heat Exchanger (for use with all Discovery & Q TGA’s)Note: Requires TGA Heat Exchanger Harness (P/N: 953176.901) for connection to the TGA Instrument. | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 953176.901 | TGA Heat Exchanger HarnessNote: For use with the TGA Heat Exchanger (P/N: 953260.901). | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 952377.901 | Heat Exchanger Conditioning Kit (fungicide) | TGA Q500/Q50 Replacement Parts | Thermal Analysis |
| 963313.901 | Blending Gas Delivery ModuleNote: For Discovery TGA 5500, TGA 550, SDT 650, or SA. | Discovery SDT 650 Accessories | Thermal Analysis |
| 960072.901 | Alumina Sample Cups, 40 μL, SDT (pkg. of 3) | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 960070.901 | Alumina Sample Cups, 90 μL, SDT (pkg. of 3) | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 961060.901 | Alumina Sample Cups, Disposable, 90 μL, SDT (pkg. of 20) | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 960239.901 | Alumina Lids, SDT (pkg. of 3)Note: For use with P/N: 960070.901 and P/N: 961060.901. | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 960070.902 | Sapphire Sample Cups, 90 μL, SDT (pkg. of 3) | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 960239.902 | Sapphire Lids, (pkg. of 3), SDTNote: For use with Sapphire Sample Cups, 90 μL, SDT (P/N: 960070.902 -pkg. of 3). | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 960148.901 | Platinum Sample Cups, 40 μL, SDT (pkg. of 3) | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 960149.901 | Platinum Sample Cups, 110 μL, SDT (pkg. of 3) | Discovery SDT 650 and Q600 Sample Pans | Thermal Analysis |
| 960034.901 | Aluminum Oxide Reference Material (Calcined Alpha) | Discovery SDT 650 and Q600 Replacement Parts | Thermal Analysis |
| 963423.901 | SDT Calibration Weights Set | Discovery SDT 650 and Q600 Replacement Parts | Thermal Analysis |
| 960017.901 | Dual Beam Thermocouple Kit (SDT Q600) | Discovery SDT 650 and Q600 Replacement Parts | Thermal Analysis |
| 270198.015 | O-Ring, SDT Furnace Tube | Discovery SDT 650 and Q600 Replacement Parts | Thermal Analysis |
| 963881.901 | Discovery SDT 650 Thermocouple Beam Assembly | Discovery SDT 650 and Q600 Replacement Parts | Thermal Analysis |
| 963011.901 | Accessory Kit, SDT 650/SDT 650 Auto | Discovery SDT 650 and Q600 Replacement Parts | Thermal Analysis |
| 957216.901 | Discovery SA, Q5000 SA Autosampler Tray - 10 PositionNote: For use with TGA hemispherical quartz sample pans. This tray is included with the Discovery SA and Q5000 SA and is an option for the Q5000 IR. | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 957099.901 | Discovery SA, Q5000 SA Tray Autosampler TGA - 25 PositionNote: For use with sealed aluminum sample pans. | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 957515.901 | Loop Decoupler KitNote: For use with all Discovery TGA’s, Discovery SA, Q5000 IR, & Q5000 SA. | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 957082.901 | Hangdown Wire Note: Sample Wire for Discovery SA/Q5000 IR/Q5000 SA/Discovery TGA; Tare Wire for Discovery SA/Q5000 SA. | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 953260.901 | TGA Heat ExchangerNote: For use with all Discovery & Q TGA’s. Requires TGA Heat Exchanger Harness (P/N: 953176.901) for connection to the TGA Instrument. | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 953176.901 | TGA Heat Exchanger HarnessNote: For use with the TGA Heat Exchanger (P/N: 953260.901). | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 952377.901 | Heat Exchanger Conditioning Kit (fungicide) | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 957381.003 | Tube Load Discovery SA, Q5000 SA Sample/Reference | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 958400.901 | Calibration Weight Set for Discovery SA | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 957450.901 | Humidity Reference Material (Sodium Bromide) | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 963313.901 | Blending Gas Delivery ModuleNote: For Discovery TGA 5500, TGA 550, SDT 650, or SA. | Discovery SA Dynamic Vapor Sorption Analyzer Replacement Parts | Thermal Analysis |
| 957210.902 | Quartz Sample Pans, (pkg. of 3)Note 1: Requires Autosampler Tray P/N: 957216.901.Note 2: For use with Discovery SA, Q5000 SA, TGA-HP, and VTI-SA Sorption Analyzers. | Sample Pans | Thermal Analysis |
| 957210.903 | Quartz Sample Pans, Metal Coated, (pkg. of 3)Note: For use with Discovery SA, Q5000 SA, TGA-HP, and VTI-SA Sorption Analyzers. | Sample Pans | Thermal Analysis |
| 957207.903 | Platinum Sample Pans, 50 μL (pkg. of 3)Note 1: Requires Tray Autosampler TGA - 25 Position (P/N: 957099.901) for use with the Discovery SA or Q5000 SA.Note 2: For use with Discovery SA, Q5000 SA, TGA-HP, and VTI-SA Sorption Analyzers. | Sample Pans | Thermal Analysis |
| 957207.904 | Platinum Sample Pans, 100 μL (pkg. of 3)Note 1: Requires Tray Autosampler TGA - 25 Position (P/N: 957099.901) for use with Discovery SA or Q5000 SA.Note 2: For use with Discovery SA, Q5000 SA, TGA-HP, and VTI-SA Sorption Analyzers. | Sample Pans | Thermal Analysis |
| 957216.901 | Autosampler Tray - 10 PositionNote 1: For use with TGA hemispherical quartz sample pans. This tray is included with the Discovery SA, Q5000 SA and is an option for the Q5000 IR.Note 2: For use with Discovery SA, Q5000 SA, TGA-HP, and VTI-SA Sorption Analyzers. | Sample Pans | Thermal Analysis |
| 957099.901 | Autosampler Tray TGA - 25 PositionNote 1: For use with sealed aluminum sample pans.Note 2: For use with Discovery SA, Q5000 SA, TGA-HP, and VTI-SA Sorption Analyzers. | Sample Pans | Thermal Analysis |
| 957216.901 | Discovery SA, Q5000 SA Autosampler Tray - 10 PositionNote: For use with TGA hemispherical quartz sample pans. This tray is included with the Discovery SA and Q5000 SA and is an option for the Q5000 IR. | Q5000 SA Replacement Parts | Thermal Analysis |
| 957099.901 | Discovery SA, Q5000 SA Tray Autosampler TGA - 25 PositionNote: For use with sealed aluminum sample pans. | Q5000 SA Replacement Parts | Thermal Analysis |
| 957515.901 | Loop Decoupler Kit Note: For use with all Discovery TGA’s, Discovery SA, Q5000 IR, & Q5000 SA. | Q5000 SA Replacement Parts | Thermal Analysis |
| 957082.901 | Hangdown Wire Note: Sample Wire for Discovery SA/Q5000 IR/Q5000 SA/Discovery TGA; Tare Wire for Discovery SA/Q5000 SA. | Q5000 SA Replacement Parts | Thermal Analysis |
| 953260.901 | TGA Heat ExchangerNote: For use with Discovery SA, all Discovery & Q TGA’s. Requires TGA Heat Exchanger Harness (P/N: 953176.901) for connection to the TGA Instrument. | Q5000 SA Replacement Parts | Thermal Analysis |
| 953176.901 | TGA Heat Exchanger HarnessNote: For use with the TGA Heat Exchanger (P/N: 953260.901). | Q5000 SA Replacement Parts | Thermal Analysis |
| 952377.901 | Heat Exchanger Conditioning Kit (fungicide) | Q5000 SA Replacement Parts | Thermal Analysis |
| 957381.003 | Tube Load Discovery SA, Q5000 SA Sample/Reference | Q5000 SA Replacement Parts | Thermal Analysis |
| 957156.901 | Replacement Sensor Kit for Humidity Chamber | Q5000 SA Replacement Parts | Thermal Analysis |
| 957400.901 | TGA Weight Calibration Set (Calibrated)Note: For the Q5000 IR and Q5000 SA. | Q5000 SA Replacement Parts | Thermal Analysis |
| 957450.901 | Humidity Reference Material (Sodium Bromide) | Q5000 SA Replacement Parts | Thermal Analysis |
| 810026.901 | Quartz Sample Holder (diameter = 12 mm)Note: For use with TGA-HP and VTI-SA. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 810027.001 | Quartz Sample Holder (flat bottom) (diameter = 12 mm)Note: For use with TGA-HP and VTI-SA. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 810028.001 | Aluminum Round Sample Holder (diameter = 12 mm; height = 5 mm)Note: For use with TGA-HP and VTI-SA. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 810028.002 | Aluminum Round Sample Holder (diameter = 25 mm; height = 5 mm)Note: For use with VTI-SA. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 810029.001 | Permeation Cell (diameter = 10 mm; height = 10 mm)Note: For use with VTI-SA. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820044.001 | Aluminum Sample Holder, Glass Opening, Round (diameter = 12 mm)Note: For use with VTI-SA; requires P/N: 820047.001 Glass Covers. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820045.001 | Aluminum Sample Holder, Glass Opening, Round (diameter = 25 mm)Note: For use with VTI-SA; requires P/N: 820048.001 Glass Covers. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820047.001 | Glass Covers, 12 mm Diameter (pkg. of 700)Note: For use with P/N: 820044.001 Aluminum Sample Holder with Glass Opening. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820048.001 | Glass Covers, 25 mm Diameter (pkg. of 160)Note: For use with P/N: 820045.001 Aluminum Sample Holder with Glass Opening. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820055.001 | Alumina Crucible (OD = 12.7 mm, height = 25.4 mm)Note: For use with the TGA-HPs. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820055.002 | Quartz Crucible Solid Bottom (OD = 12 mm, height = 27 mm)Note: For use with the TGA-HPs. | Sample Holders for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820347.901 | VTI-SA Humidifier Wicks (pkg. of 35)Note: Replacement humidifier wick consisting of a cotton wick over a supporting polypropylene rod. | VTI-SA+ Sorption Analyzer Accessories | Thermal Analysis |
| 820344.901 | BPL Carbon Demonstration MaterialNote: Demonstration material for use in the VTI-SA. | Demonstration Materials for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820345.901 | NaCl Demonstration MaterialNote: Demonstration material for use in the VTI-SA. | Demonstration Materials for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820343.901 | PVP Demonstration MaterialNote: Demonstration material for use in the VTI-SA. | Demonstration Materials for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 820348.901 | 5A Zeolite Demonstration MaterialNote: Demonstration material for use in the TGA-HP. | Demonstration Materials for TGA-HP and VTI-SA+ Sorption Analyzers | Thermal Analysis |
| 945250.901 | TMA Q400EM Upgrade Kit | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 946510.901 | Discovery TMA 450EM Upgrade Kit | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 944200.901 | Discovery TMA 450EM Upgrade Kit | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 945050.901 | TMA Film/Fiber Accessory KitNote: Consists of film/fiber sample stage, film/fiber probe assembly, film clamp assemblies, film clamp fixture, jeweler’s screwdriver, and film clamp screws. | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 944202.901 | Volumetric Accessory KitNote: Consists of dilatometer probe assembly, three dilatometer sample vials, two vials of filling medium, and a vial of aluminum calibration standard. | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 944203.902 | Flexure Accessory KitNote 1: This Kit is for the Discovery 450 and Q400. It is supplied with the Discovery 450 EM and Q400 EM.Note 2: Includes flexure probe assembly, flexure sample platform, and phase calibration fixture. | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 945300.901 | Mechanical Cooling Accessory - MCA70 (120VAC/60Hz): for use with Discovery 450/450EM and QNX-based Q400 and Q400 EMNote: For programmed or quench cooling of the Discovery 450/450EM or QNX-based Q400/Q400 EM TMA over temperature range of -70 °C to 400 °C. Sealed refrigeration system does not require liquid nitrogen. | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 945300.902 | Mechanical Cooling Accessory - MCA70 (220VAC/50Hz): for use with Discovery 450/450EM and QNX-based Q400 and Q400 EMNote: For programmed or quench cooling of Discovery 450/450EM and QNX-based Q400/Q400 EM TMA over temperature range of -70 °C to 400 °C. Sealed refrigeration system does not require liquid nitrogen. | Discovery TMA 450/450EM and Q400/Q400EM Accessories | Thermal Analysis |
| 944120.901 | Sample Stage | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944122.901 | Standard Expansion Probe Assembly | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944123.901 | Macro-Expansion Probe Assembly | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944124.901 | Volumetric Probe Assembly | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 941143.000 | Volumetric Sample Vial | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944125.901 | Hemispherical Probe Assembly | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944126.901 | Penetration Probe Assembly | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944127.901 | Flexure Probe Assembly | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 945045.901 | 3-Point Bending Calibration Fixture | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 941054.000 | 3-Point Bending Flexure Platform | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944121.901 | Film/Fiber Sample Holder | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 945051.901 | Film/Fiber Probe Assembly | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 945052.901 | Film/Fiber Upper Clamp | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 945053.901 | Film/Fiber Lower Clamp | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 945054.001 | Film Clamping Fixture | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944330.901 | Film Clamp Screws, #0-80, (pkg. of 10) | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 941038.901 | Vial of Cleaved Aluminum BallsNote: For the Film/Fiber Probe. | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 941148.901 | Filling MediumNote: For the Dilatometer Vial. | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944341.901 | Protective Quartz Disc for Sample Stage, (pkg. of 20) | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944344.902 | Thermocouple Kit | Discovery TMA 450/450EM and Q400/Q400EM Replacement Parts | Thermal Analysis |
| 944217.901 | Replacement Certified Aluminum Reference Material | Discovery TMA 450/450EM and TMA Q400/Q400EM Calibration Materials | Thermal Analysis |
| 915061.901 | Replacement Certified Indium Reference Material | Discovery TMA 450/450EM and TMA Q400/Q400EM Calibration Materials | Thermal Analysis |
| 900902.901 | Indium Calibration Material (not certified) | Discovery TMA 450/450EM and TMA Q400/Q400EM Calibration Materials | Thermal Analysis |
| 944206.901 | TMA Certified Temperature and Dimension Calibration Kit | Discovery TMA 450/450EM and TMA Q400/Q400EM Calibration Materials | Thermal Analysis |
| 946799.901 | TMA 450 RH Accessory Kit | Discovery TMA 450 RH Accessories | Thermal Analysis |
| 946801.901 | TMA 450 RH Film/Fiber Accessory KitNote: Consists of film/fiber sample stage, film/fiber probe assembly, film clamp assemblies, film clamp fixture, jeweler's screwdriver, and film clamp screws. | Discovery TMA 450 RH Accessories | Thermal Analysis |
| 946802.901 | TMA 450 Flexure Accessory KitNote: Includes flexure probe assembly, flexure sample platform, and phase calibration fixture. | Discovery TMA 450 RH Accessories | Thermal Analysis |
| 946791.901 | Sample Stage, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946792.901 | Standard Expansion Probe Assembly, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946793.901 | Macro-Expansion Probe Assembly, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946795.901 | Hemispherical Probe Assembly, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946796.901 | Penetration Probe Assembly, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946797.901 | Flexure Probe Assembly, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 945045.901 | 3-Point Bending Calibration Fixture | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 941054.000 | 3-Point Bending Flexure Platform | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946790.901 | Film/Fiber Sample Holder, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946798.901 | Film/Fiber Probe Assembly, TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 945052.901 | Film/Fiber Upper Clamp | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 945053.901 | Film/Fiber Lower Clamp | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 945054.001 | Film Clamping Fixture | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 944330.901 | Film Clamp Screws, #0-80, (pkg. of 10) | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 941038.901 | Vial of Cleaved Aluminum BallsNote: For the Film/Fiber Probe. | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 944341.901 | Protective Quartz Disc for Sample Stage, (pkg. of 20) | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 946729.001 | Tube Extension TMA RH | Discovery TMA 450 RH Replacement Parts | Thermal Analysis |
| 944217.901 | Replacement Certified Aluminum Reference Material | Discovery TMA 450 RH Calibration Materials | Thermal Analysis |
| 925713.001 | Advantage Specialty Library Software | Computer Accessories | Thermal Analysis |
| 251471.002 | DSL Router with 4-Port SwitchNote: For communication between an external controller and Thermal and Rheology instruments. | Computer Accessories | Thermal Analysis |
| 926020.001 | TRIOS Guardian (21 CFR Part 11 Compliance) Software | TRIOS Guardian | Thermal Analysis |
| 970011.901 | Accessory Kit, Q2000/Q200 | Q Series Instrument Accessory Kits | Thermal Analysis |
| 970011.902 | Accessory Kit, Q20 | Q Series Instrument Accessory Kits | Thermal Analysis |
| 970011.903 | Accessory Kit, Auto Q20 | Q Series Instrument Accessory Kits | Thermal Analysis |
| 957011.901 | Accessory Kit, Q5000 IR | Q Series Instrument Accessory Kits | Thermal Analysis |
| 957011.902 | Accessory Kit, Q5000 SA | Q Series Instrument Accessory Kits | Thermal Analysis |
| 952011.901 | Accessory Kit, Q500/Q50Note: Contains 1 package of 100 μL platinum pans. | Q Series Instrument Accessory Kits | Thermal Analysis |
| 961011.901 | Accessory Kit, SDT Q600 | Q Series Instrument Accessory Kits | Thermal Analysis |
| 944200.901 | Accessory Kit, Q400 and Q400 EMNote: This Accessory Kit does not contain the Flexure Accessory Kit (P/N: 944203.902) and must be added in order to replace the entire contents of the Q400 EM Accessory Kit. | Q Series Instrument Accessory Kits | Thermal Analysis |
| 944203.902 | Flexure Accessory Kit (for Q400 use; supplied with Q400 EM)Note: Includes flexure probe assembly, flexure sample platform, and phase calibration fixture. | Q Series Instrument Accessory Kits | Thermal Analysis |
| 910824.001 | DSC Cell Cleaning Brush | Common Thermal Analysis Tools and Accessories | Thermal Analysis |
| 259509.000 | Spatula, Stainless Steel | Common Thermal Analysis Tools and Accessories | Thermal Analysis |
| 259508.000 | Tweezers, Brass | Common Thermal Analysis Tools and Accessories | Thermal Analysis |
| 271580.001 | Tweezers, Curved | Common Thermal Analysis Tools and Accessories | Thermal Analysis |
| 977400.001 | Crucible, D 10 mm H 11 mm, Ceramics, DynTHERM TGA | Sample Crucibles for DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977402.001 | Crucible, D 11 mm H 6 mm, Ceramics, DynTHERM TGA | Sample Crucibles for DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977401.001 | Crucible, D 16 mm H 21 mm, Ceramics, DynTHERM TGA | Sample Crucibles for DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977576.901 | Crucible, FFT, Inconel, DynTHERM TGA | Sample Crucibles for DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977577.001 | Insulating Ring for Crucible, FFT, Inconel, DynTHERM TGA | Sample Crucibles for DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977578.901 | Load Hook for Crucible, FFT, Inconel, DynTHERM TGA | Sample Crucibles for DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977420.001 | Crucible Sinker Shape, D 16 mm H 20 mm, SS, IsoSORP SA | Sample Crucibles for IsoSORP SA | Rubotherm Series - Thermal Analysis |
| 977421.001 | Crucible, D 16 mm H 20 mm, SS, IsoSORP SA | Sample Crucibles for IsoSORP SA | Rubotherm Series - Thermal Analysis |
| 977425.001 | Crucible, D 16 mm H 20 mm, Mesh-SS, IsoSORP SA | Sample Crucibles for IsoSORP SA | Rubotherm Series - Thermal Analysis |
| 977406.901 | Crucible, D 16 mm H 20 mm, Fused Silica, IsoSORP SA | Sample Crucibles for IsoSORP SA | Rubotherm Series - Thermal Analysis |
| 977430.901 | Crucible for Filter Lid, D 22 mm H 28 mm, SS, IsoSORP SA | Sample Crucibles for IsoSORP SA | Rubotherm Series - Thermal Analysis |
| 977540.001 | Filter Lid for Crucible (P/N 977430.901) | Sample Crucibles for IsoSORP SA | Rubotherm Series - Thermal Analysis |
| 977518.001 | O-Ring, 30 mm x 1 mm, Viton | O-Ring Gaskets for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977519.001 | O-Ring, 30 mm x 1 mm, Copper | O-Ring Gaskets for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977520.001 | O-Ring, 30 mm x 1 mm, Gold plated Copper | O-Ring Gaskets for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977521.001 | O-Ring, 36 mm x 2 mm, FFKM | O-Ring Gaskets for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977522.001 | O-Ring, 36 mm x 2 mm, Viton | O-Ring Gaskets for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977450.901 | Gas Connection Tube O-Ring, Cu, IsoSORP SA, pkg. of 20 | O-Ring Gaskets for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977415.001 | Sinker for Gas Density Measurement, D 16 mm H 20 mm, Ti, IsoSORP SA | Accessories for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977506.001 | Cable Y-Extension for 2XPt100 Thermometer, 3 m, IsoSORP SA | Accessories for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977570.901 | Connection wire set for Rubotherm Series MSB | Accessories for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977571.001 | MSB Adaptor 1 for Sample Decoupling Positioning | Accessories for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977573.001 | Sample Crucible Protection Cage | Accessories for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 977574.001 | Long Sample Crucible Protection Cage | Accessories for IsoSORP SA and DynTHERM TGA | Rubotherm Series - Thermal Analysis |
| 961060.901 | Alumina Sample Cups, Disposable, 90 μL, (pkg. of 20) | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977820.901 | Sample Cell O-Ring, SS, Discovery HP-TGA, (pkg. of 20) | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977330.901 | Vacuum Kit for Discovery HP-TGA 75 and 750 | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977330.902 | Vacuum Kit for Discovery HP-TGA 7500 | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977340.901 | MS Connection Kit for Discovery HP-TGA | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977840.901 | 100 mg Class E1 Precision Weight for HP-TGA Weight Calibration | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977830.901 | Levitation Rod, Al2O3, D 0.5 mm L 305 mm, Discovery HP-TGA | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977827.001 | Protection Tube for Levitation Rod, Al2O3, Discovery HP-TGA | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 977825.001 | Sample Crucible Holding Platform, Al2O3, Discovery HP-TGA | Discovery HP-TGA Accessories | Rubotherm Series - Thermal Analysis |
| 402046.901 | AutoPilot Option for TRIOS Software | HR x0, DHR, and AR-Series Software | Rheology - HR 30, HR 20, HR 10 |
| 999801.064 | AutoPilot Basic Script Writing Service | HR x0, DHR, and AR-Series Software | Rheology - HR 30, HR 20, HR 10 |
| 999801.066 | AutoPilot Advanced Script Writing Service | HR x0, DHR, and AR-Series Software | Rheology - HR 30, HR 20, HR 10 |
| 926018.001 | LAOS and FT RHEOLOGY for TRIOSNote: Large Amplitude Oscillatory Shear and Fourier Transform Rheology Software for TRIOS. | HR x0, DHR, and AR-Series Software | Rheology - HR 30, HR 20, HR 10 |
| 926019.001 | Rheology Polymer Library for TRIOSNote: Includes software for Molecular Weight Distribution Calculations. | HR x0, DHR, and AR-Series Software | Rheology - HR 30, HR 20, HR 10 |
| 534805.901 | Axial and Tack Testing Software Option for HR 10 Rheometer | HR x0, DHR, and AR-Series Software | Rheology - HR 30, HR 20, HR 10 |
| 534806.901 | Direct Strain Software Option for HR 10 Rheometer | HR x0, DHR, and AR-Series Software | Rheology - HR 30, HR 20, HR 10 |
| 250000.001 | HR x0, DHR & AR Rheometer Filter/Regulator | Installation and Peltier Kits | Rheology - HR 30, HR 20, HR 10 |
| 500030.901 | Membrane Compressed Air Dryer | Installation and Peltier Kits | Rheology - HR 30, HR 20, HR 10 |
| 403209.901 | Air Cooled Peltier Circulator (110/220VAC; 50/60Hz)Note: For use with HR x0, DHR, AR and ARES Rheometers. | Installation and Peltier Kits | Rheology - HR 30, HR 20, HR 10 |
| 404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP Systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. | Installation and Peltier Kits | Rheology - HR 30, HR 20, HR 10 |
| 534900.901 | HR x0, DHR Glovebox Feedthrough KitNote 1: For use with DHR and HR x0 models.Note 2: If the glovebox kit is offered as accessory for an existing HR or DHR, part number 999800.529 covering for the installation of the existing HR/DHR in a glovebox must be included in the quote. | Installation and Peltier Kits | Rheology - HR 30, HR 20, HR 10 |
| 533210.901 | HR x0, DHR Smart Swap™ Peltier PlateNote: Temperature Range = 200 °C. | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 533209.901 | HR x0, DHR Smart Swap Advanced Peltier Plate | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 534555.901 | HR x0, DHR Smart Swap High Temperature Advanced Peltier Plate | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 546502.901 | HR x0, DHR Dual-Stage Smart Swap Peltier PlateNote: Temperature Range = -45 °C to 200 °C. | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 533211.901 | HR x0, DHR Stepped Peltier with Screw-in PlateNote: Temperature Range = 200 °C. | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 533212.901 | HR x0, DHR Smart Swap Disposable Stepped Peltier PlateNote: Temperature Range = 200 °C.DHR requires Disposable Plate Shaft (P/N: 546320.901).HR x0 requires Disposable Plate Shaft (P/N: 546320.941). | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 547910.901 | HR x0, DHR & AR-Series Peltier Plate Immersion CellNote: Attaches to HR x0, DHR & AR-Series Smart Swap Peltier Plate.Allows testing of samples in parallel plate and cone and plate geometries while fully immersed in liquid. | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 547902.901 | HR x0, DHR, AR-Series, and ARES-G2 Peltier Camera Viewer OptionNote: Camera viewer is NOT compatible with AR 2000 model. | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 547901.901 | HR x0, DHR & AR-Series Peltier Plate Camera Viewer Mounting KitNote: Customer must supply USB Web camera. Camera viewer is NOT compatible with AR 2000 model. | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 533231.901 | AR to HR x0, DHR Quick-Connect Plumbing AdapterNote: Required for using existing accessories on a HR x0, DHR instrument (includes 2 large male fittings). | Peltier Plate Temperature Options | Rheology - HR 30, HR 20, HR 10 |
| 529613.901 | Hard Anodized Split Solvent Trap Cover and Location RingNote: For Standard Peltier Plate. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 517105.901 | Insulated Solvent Trap Cover and Location RingNote: For standard Peltier Plate - NOT for use with Stepped Peltier. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 529612.901 | Purge Gas Cover and Location RingNote: For Standard Peltier Plate. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 531070.901 | Hard Anodized Aluminum Solvent TrapNote: For Advanced Peltier Plate. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 531035.901 | Insulated Solvent Trap for Advanced Peltier PlateNote: Includes Solvent Trap Cover and Location Ring. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 531038.901 | Advanced Peltier Plate Purge Gas Cover | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 529750.901 | 25 mm Plate Insulating Thermal CoverNote: For Peltier Plate. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 570059.901 | Hard Anodized Aluminum Cover Plate (with Ring Adapter),Cross Hatched, 40 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 570011.901 | Hard Anodized Aluminum Cover Plate (with Ring Adapter),Cross Hatched, 60 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 517040.901 | Stainless Steel Cover Plate, Cross Hatched, 40 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 517060.901 | Stainless Steel Cover Plate, Cross Hatched, 60 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 545430.901 | Stainless Steel Peltier Plate Cover | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 545431.901 | Stainless Steel Peltier Plate Cover, Raised Center, 20 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 545433.901 | Stainless Steel Peltier Plate Cover, Raised Center, 60 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 545435.901 | Titanium Peltier Plate Cover, Raised Center, 40 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 534465.901 | HR x0 Peltier Plate Draft Shield | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - HR 30, HR 20, HR 10 |
| 402751.902 | HR x0, DHR, ARES-G2, APS, Quick Change Plate Holder | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 534595.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 4 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402625.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 8 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402491.901 | HR x0, DHR, ARES-G2, Stainless Steel, 20 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402624.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 25 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402623.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 40 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402622.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 50 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402493.901 | HR x0, DHR, ARES-G2, Hard Anodized Aluminum, 20 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402630.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 25 mm, QuickChange Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402631.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 40 mm,Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402632.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 50 mm,Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402633.901 | HR x0, DHR, ARES-G2, APS, Titanium, 25 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402634.901 | HR x0, DHR, ARES-G2, APS, Titanium, 50 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402811.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 8 mm,Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402494.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 20 mm,Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402770.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 25 mm,Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402769.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 40 mm,Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402627.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 8 mm,Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402492.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 20 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402628.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 25 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402629.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 40 mm, Quick Change Plate | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402681.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 42 mm Dia., 15 mm Edge Height, Immersion CupNote: Includes two removable sidewalls (one aluminum and one clear polycarbonate) for easy sample loading and trimming. | HR x0 and DHR Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 546320.941 | HR x0, Stainless Steel, Smart Swap 2 Disposable Plate ShaftNote: For Peltier Plate and UV Accessories. | HR x0 and DHR Disposable Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402611.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 8 mm, Quick Change Disposable Plate (pkg. of 20) | HR x0 and DHR Disposable Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402612.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 20 mm, Quick Change Disposable Plate (pkg. of 20) | HR x0 and DHR Disposable Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402613.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 25 mm, Quick Change Disposable Plate (pkg. of 20) | HR x0 and DHR Disposable Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 402751.901 | HR x0, DHR, ARES-G2, APS, Quick Change Disposable Plate Holder | HR x0 and DHR Disposable Quick Change Plates and Holder | Rheology - HR 30, HR 20, HR 10 |
| 532066.901 | AR-XXXX to HR x0, DHR & AR-G2 Geometry Adapter KitNote: For use only with standard Peltier Plate geometries. | HR x0 Custom and Standard Geometry Adapters | Rheology - HR 30, HR 20, HR 10 |
| 545904.941 | HR x0 Rheometer Custom Geometry Adapter | HR x0 Custom and Standard Geometry Adapters | Rheology - HR 30, HR 20, HR 10 |
| 511204.946 | HR x0, Stainless Steel, 20 mm, 1 deg Cone, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 511206.946 | HR x0, Stainless Steel, 20 mm, 2 deg Cone, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 511207.946 | HR x0, Stainless Steel, 20 mm, 4 deg Cone, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 511080.946 | HR x0, Stainless Steel, 8 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 511120.946 | HR x0, Stainless Steel, 12 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 511200.946 | HR x0, Stainless Steel, 20 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 511250.946 | HR x0, Stainless Steel, 25 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 517080.946 | HR x0, Stainless Steel, Cross Hatched, 8 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 517200.946 | HR x0, Stainless Steel, Cross Hatched, 20 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 519080.946 | HR x0, Stainless Steel, Sandblasted, 8 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 519200.946 | HR x0, Stainless Steel, Sandblasted, 20 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 519250.946 | HR x0, Stainless Steel, Sandblasted, 25 mm Plate, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - HR 30, HR 20, HR 10 |
| 511203.945 | HR x0, Stainless Steel, 20 mm, 0.5 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511204.945 | HR x0, Stainless Steel, 20 mm, 1 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511206.945 | HR x0, Stainless Steel, 20 mm, 2 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511207.945 | HR x0, Stainless Steel, 20 mm, 4 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511403.945 | HR x0, Stainless Steel, 40 mm, 0.5 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511404.945 | HR x0, Stainless Steel, 40 mm, 1 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511406.945 | HR x0, Stainless Steel, 40 mm, 2 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511407.945 | HR x0, Stainless Steel, 40 mm, 4 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511504.945 | HR x0, Stainless Steel, 50 mm, 1 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511506.945 | HR x0, Stainless Steel, 50 mm, 2 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511603.945 | HR x0, Stainless Steel, 60 mm, 0.5 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511604.945 | HR x0, Stainless Steel, 60 mm, 1 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511606.945 | HR x0, Stainless Steel, 60 mm, 2 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511607.945 | HR x0, Stainless Steel, 60 mm, 4 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511200.945 | HR x0, Stainless Steel, 20 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511400.945 | HR x0, Stainless Steel, 40 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511500.945 | HR x0, Stainless Steel, 50 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 511600.945 | HR x0, Stainless Steel, 60 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 517200.945 | HR x0, Stainless Steel, Cross Hatched, 20 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 517400.945 | HR x0, Stainless Steel, Cross Hatched, 40 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 517600.945 | HR x0, Stainless Steel, Cross Hatched, 60 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 519200.945 | HR x0, Stainless Steel, Sandblasted, 20 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 519400.945 | HR x0, Stainless Steel, Sandblasted, 40 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 519600.945 | HR x0, Stainless Steel, Sandblasted, 60 mm PlateNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 512206.946 | HR x0, Stainless Steel, Composite HB, 20 mm, 2 deg Cone, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512206.945 | HR x0, Stainless Steel, Composite HB, 20 mm, 2 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512406.945 | HR x0, Stainless Steel, Composite HB, 40 mm, 2 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512407.945 | HR x0, Stainless Steel, Composite HB, 40 mm, 4 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512606.945 | HR x0, Stainless Steel, Composite HB, 60 mm, 2 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512607.945 | HR x0, Stainless Steel, Composite HB, 60 mm, 4 deg ConeNote: For use with HR x0 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512080.946 | HR x0, Stainless Steel, Composite HB, 8 mm, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512200.946 | HR x0, Stainless Steel, Composite HB, 20 mm, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512200.945 | HR x0, Stainless Steel, Composite HB, 20 mmNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512250.946 | HR x0, Stainless Steel, Composite HB, 25 mm, NSTNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512400.945 | HR x0, Stainless Steel, Composite HB, 40 mmNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 512600.945 | HR x0, Stainless Steel, Composite HB, 60 mmNote: For use with HR x0 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - HR 30, HR 20, HR 10 |
| 520400.945 | HR x0, Titanium, 40 mm PlateNote: For use with HR x0 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 520600.945 | HR x0, Titanium, 60 mm PlateNote: For use with HR x0 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 520604.945 | HR x0, Titanium, 60 mm, 1 deg ConeNote: For use with HR x0 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 520606.945 | HR x0, Titanium, 60 mm, 2 deg ConeNote: For use with HR x0 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513204.945 | HR x0, HA Aluminum, 20 mm, 1 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513206.945 | HR x0, HA Aluminum, 20 mm, 2 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513207.945 | HR x0, HA Aluminum, 20 mm, 4 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513404.945 | HR x0, HA Aluminum, 40 mm, 1 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513406.945 | HR x0, HA Aluminum, 40 mm, 2 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513407.945 | HR x0, HA Aluminum, 40 mm, 4 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513603.945 | HR x0, HA Aluminum, 60 mm, 0.5 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513604.945 | HR x0, HA Aluminum, 60 mm, 1 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513606.945 | HR x0, HA Aluminum, 60 mm, 2 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513607.945 | HR x0, HA Aluminum, 60 mm, 4 deg ConeNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513200.945 | HR x0, HA Aluminum, 20 mm PlateNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513400.945 | HR x0, HA Aluminum, 40 mm PlateNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 513600.945 | HR x0, HA Aluminum, 60 mm PlateNote: For use with HR x0 only. | Hard Anodized Aluminum (HA AL) Peltier Plate Geometries with Solvent Trap | Rheology - HR 30, HR 20, HR 10 |
| 533201.901 | HR x0, DHR Smart Swap Concentric Cylinder Peltier JacketNote: Does NOT include cup or rotor. Includes cover. | Concentric Cylinder Jackets | Rheology - HR 30, HR 20, HR 10 |
| 547310.901 | HR x0, DHR & AR-Series Smart Swap Concentric Cylinder Electrically Heated Jacket | Concentric Cylinder Jackets | Rheology - HR 30, HR 20, HR 10 |
| 547308.901 | HR x0, DHR & AR-Series Electrically Heated Jacket Air Cooling Option | Concentric Cylinder Jackets | Rheology - HR 30, HR 20, HR 10 |
| 546011.941 | HR x0, HA Aluminum Conical DIN Rotor, Rad = 14 mm, Height = 42 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546016.941 | HR x0, HA Aluminum Recessed End Rotor, Rad = 14 mm, Height = 42 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546012.941 | HR x0, Stainless Steel, Conical DIN Rotor, Rad = 14 mm, Height = 42 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546009.941 | HR x0, Stainless Steel, Conical DIN Rotor, Sandblasted, Rad = 14 mm,Height = 42 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546017.941 | HR x0, Stainless Steel Recessed End Rotor, Rad = 14 mm, Height = 42 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 545043.941 | HR x0, Stainless Steel, Conical Rotor, Rad = 7.5 mmNote 1: Appropriate for measurements of crumb-rubber modified ashpalt.Note 2: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546026.941 | HR x0, Stainless Steel Vaned Rotor, Rad = 14 mm, Height = 42 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546027.941 | HR x0, Wide Gap Vaned Rotor with Heat Break, Rad = 7.5 mm, Height = 38 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546048.941 | HR x0, Stainless Steel Double Gap Rotor, Inner Rad = 16 mm,Outer Rad = 17.5 mm, Height = 53 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546049.941 | HR x0, HA Aluminum Double Gap Rotor, Inner Rad = 16 mm,Outer Rad = 17.5 mm, Height = 53 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546021.941 | HR x0, Ver 1 HA Aluminum Double Gap Rotor, Inner Rad = 20.38 mm,Outer Rad = 21.96, Height = 59.5 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 546022.941 | HR x0, Ver 1 Stainless Steel Double Gap Rotor, Inner Rad = 20.38 mm,Outer Rad = 21.96, Height = 59.5 mmNote: For use with HR x0 only. | HR x0 Smart Swap 2 Rotors for Concentric Cylinders | Rheology - HR 30, HR 20, HR 10 |
| 545700.901 | HA Aluminum Standard Concentric Cylinder Cup with CapNote: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545696.901 | Stainless Steel Standard Concentric Cylinder Cup with Cap | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 546046.901 | Stainless Steel, Single Gap Cup, Sandblasted, Rad = 15.2 mm | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 546050.901 | HA Aluminum Double Gap Concentric Cylinder Cup (Inner Rad = 15.1 mm, Outer Rad = 18.5 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 546045.901 | Stainless Steel Double Gap Concentric Cylinder Cup (Diameter = 30.4 mm, Outer Rad = 18.5 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545612.901 | Ver 1 HA Aluminum Double Gap Concentric Cylinder Cup (Inner Rad = 20.00 mm, Outer Rad = 22.38 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545613.901 | Ver 1 Stainless Steel Double Gap Concentric Cylinder Cup (Inner Rad = 20.00 mm, Outer Rad = 22.38 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545615.901 | HA Aluminum Large Diameter Concentric Cylinder Cup (Rad = 22 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545642.001 | Stainless Steel Blank PlugNote: For HR x0, DHR & AR-Series Peltier Jacket Double Gap Cup. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545610.901 | HA Aluminum Grooved Concentric Cylinder CupNote: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545666.901 | HA Aluminum Starch Rotor Concentric Cylinder Cup (Rad = 18.5 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 547305.901 | Stainless Steel Single-Piece Concentric Cylinder Cup | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545050.901 | Disposable Concentric Cylinder KitNote: For Peltier and Electrically Heated Jackets. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545075.901 | Disposable Concentric Cylinder Cups (pkg. of 20) | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545609.901 | Peltier Concentric Cylinder Solvent TrapNote: NOT for use with Double Wall Concentric Cylinder System. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 545626.001 | Split CoverNote: For HR x0, DHR & AR-Series Smart Swap Peltier Concentric Cylinders. | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 578096.001 | Replacement O-Ring for Double Gap Concentric Cylinder Cup | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 578148.001 | Replacement O-Ring for Standard and Grooved Concentric CylinderCups with Cap | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 270323.007 | High Temperature O-Ring for SST Double Gap Concentric Cylinder Cup | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 270323.008 | High Temperature O-Ring for SST Standard Concentric Cylider Cup withCap | HR x0, DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - HR 30, HR 20, HR 10 |
| 533246.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Cup with Slotted Cage | HR x0, DHR & AR-G2 Building Materials Cell | Rheology - HR 30, HR 20, HR 10 |
| 533247.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Paddle | HR x0, DHR & AR-G2 Building Materials Cell | Rheology - HR 30, HR 20, HR 10 |
| 533264.901 | HR x0, DHR & AR-G2, Replacement Stainless Steel Building Materials CellSlotted CageNote: For use with Stainless Steel Building Materials Cell Cup with Slotted Cage (P/N: 533246.901). | HR x0, DHR & AR-G2 Building Materials Cell | Rheology - HR 30, HR 20, HR 10 |
| 546018.901 | HR x0, DHR & AR-G2 Stainless Steel Helical Rotor | HR x0, DHR & AR-G2 and AR Helical Tools | Rheology - HR 30, HR 20, HR 10 |
| 546093.001 | Helical Cup, HA Aluminum (diameter = 34 mm, height = 50 mm) | HR x0, DHR & AR-G2 and AR Helical Tools | Rheology - HR 30, HR 20, HR 10 |
| 404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. | Circulators (Computer Controlled) | Rheology - HR 30, HR 20, HR 10 |
| 202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60Hz for use with Upper Peltier PlateNote: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). | Circulators (Computer Controlled) | Rheology - HR 30, HR 20, HR 10 |
| 202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz for use with Upper Peltier Plate Note: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). | Circulators (Computer Controlled) | Rheology - HR 30, HR 20, HR 10 |
| 534050.901 | HR x0, Upper Peltier Plate SystemNote: For use with lower peltier plates. | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534565.901 | HR x0 Upper Peltier Plate Dry Asphalt Kit | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534575.901 | HR x0 Upper Peltier Plate Disposable Plate Kit | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534052.901 | UPP Solvent Reservoir for Standard Peltier Plate | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534053.901 | UPP Solvent Reservoir for Advanced Peltier Plate | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534660.901 | UPP Flowmeter | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60Hz for use with Upper Peltier PlateNote: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz for use with Upper Peltier Plate Note: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534054.901 | UPP Low Temperature Accessory Kit | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 203305.001 | HC-30 UPP Low Temperature Circulation Fluid (pkg. of 1) | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534538.001 | 6 mm Sample Trimming Tool | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534539.001 | 3 mm Sample Trimming Tool | UPP Upper Peltier Plate (UPP) Kits and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534515.941 | HR x0, Stainless Steel, 8 mm, Upper Peltier UTS Plate | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534519.941 | HR x0, Stainless Steel, 20 mm, Upper Peltier UTS Plate | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534516.941 | HR x0, Stainless Steel, 25 mm, Upper Peltier UTS PlateNote: Included with HR x0 Upper Peltier Plate System (P/N: 534050.901). | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534517.941 | HR x0, Stainless Steel, 40 mm, Upper Peltier UTS Plate | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534518.941 | HR x0, Stainless Steel, 40 mm, 2 deg, Upper Peltier UTS Cone | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534540.941 | HR x0 Smart Swap 2 UPP Screw-in Upper Geometry with Heat SpreaderNote: Requires Upper Temperature Sensor Draw Rod (P/N: 534585.901) for UPP disposable/screw-in geometry. | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534525.941 | HR x0 Smart Swap 2 UPP Disposable Upper Geometry with Heat SpreaderNote: Requires Upper Temperature Sensor Draw Rod (P/N: 534585.901) for UPP disposable/screw-in geometry. | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534585.901 | HR x0 & DHR, Upper Temperature Sensor Draw Rod for use with the Upper Peltier Plate disposable/screw-in geometries Note: For use with UPP only. Requires UPP Screw-in or Disposable Upper geometry with Heat Spreader. | UPP Upper Peltier Plate Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534063.901 | HR x0 Upper Heated Plate SystemNote: For use with Peltier Plate. | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 545815.941 | HR x0 Upper Heated Plate Smart Swap 2 Geometry Shaft and Heat Spreader | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 545808.901 | HR x0, DHR & AR-Series UHP and Dry Asphalt Low Temperature CoolingOptionNote: This cooling option is required when cooling with fluid circulator below temperatures of 5 °C. Customer must supply fluid circulator. | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 545807.901 | HR x0, DHR & AR-Series UHP and Dry Asphalt Standard Cooling OptionNote: This cooling option is required when cooling with fluid circulator above temperatures of 5 °C. Customer must supply fluid circulator. | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 534058.901 | HR x0 UHP and Dry Asphalt Vortex CoolerNote: Requires Low Temperature Cooling Option (P/N: 545808.901). | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 546201.941 | HR x0 Smart Swap 2 UHP/EHP Upper Disposable Plate HolderNote: Not compatible with UTS. | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 545879.901 | HR x0, DHR & AR-G2 UHP Heat Flow Calibration Kit | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 534059.901 | HR x0 Combined UHP and Peltier ManifoldNote: For use over temperature range of 5 °C to 90 °C.Requires chilling circulator with water circulation fluid controlled at 2 °C. | UHP and Dry Asphalt Systems | Rheology - HR 30, HR 20, HR 10 |
| 534056.901 | HR x0 Electrically Heated Plate SystemNote: Max Temperature = 400 °C. Includes 25 mm stainless steel plates. | EHP Electrically Heated Plate Kits | Rheology - HR 30, HR 20, HR 10 |
| 534057.901 | HR x0 Electrically Heated Disposable Plate SystemNote: Max Temperature = 400 °C. Includes five sets of 25 mm drip channel disposable plates. | EHP Electrically Heated Plate Kits | Rheology - HR 30, HR 20, HR 10 |
| 534062.901 | HR x0 Add-On Disposable Plate Accessory for EHPNote: Includes parts necessary to convert Electrically Heated Plate System, P/N: 533206.901 or P/N: 534056.901, for disposable plate use.Includes five sets of 25 mm drip channel disposable plates. | EHP Electrically Heated Plate Kits | Rheology - HR 30, HR 20, HR 10 |
| 546109.901 | EHP Glass Purge Cover (maximum use temperature = 300 °C) | EHP Electrically Heated Plate Kits | Rheology - HR 30, HR 20, HR 10 |
| 546127.901 | HR x0, DHR and AR EHP GCA Kit (cooling down to -70 °C) | EHP Electrically Heated Plate Kits | Rheology - HR 30, HR 20, HR 10 |
| 991600.901 | Gas Cooling AccessoryNote: For HR x0, DMA 850, Q800, DHR, and AR-Series EHP. | EHP Electrically Heated Plate Kits | Rheology - HR 30, HR 20, HR 10 |
| 546202.941 | HR x0, Stainless Steel, 8 mm Upper UTS PlateNote: For use with P/N: 546240.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546220.941 | HR x0, Stainless Steel, 20 mm Upper UTS PlateNote: For use with P/N: 546261.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546203.941 | HR x0, Stainless Steel, 25 mm Upper UTS PlateNote: For use with P/N: 546241.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546204.941 | HR x0, Stainless Steel, 40 mm Upper UTS PlateNote: For use with P/N: 546242.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546210.941 | HR x0, Stainless Steel, 25 mm 0.1 Rad Upper UTS ConeNote: For use with P/N: 546241.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546208.941 | HR x0, Stainless Steel, 25 mm 0.04 Rad Upper UTS ConeNote: For use with P/N: 546241.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546206.941 | HR x0, Stainless Steel, 25 mm 0.02 Rad Upper UTS ConeNote: For use with P/N: 546241.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546205.941 | HR x0, Stainless Steel, 25 mm 1 deg Upper UTS ConeNote: For use with P/N: 546241.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546207.941 | HR x0, Stainless Steel, 25 mm 2 deg Upper UTS ConeNote: For use with P/N: 546241.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546209.941 | HR x0, Stainless Steel, 25 mm 4 deg Upper UTS ConeNote: For use with P/N: 546241.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546216.941 | HR x0, Stainless Steel, 40 mm 0.1 Rad Upper UTS ConeNote: For use with P/N: 546242.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546214.941 | HR x0, Stainless Steel, 40 mm 0.04 Rad Upper UTS ConeNote: For use with P/N: 546242.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546212.941 | HR x0, Stainless Steel, 40 mm 0.02 Rad Upper UTS ConeNote: For use with P/N: 546242.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546211.941 | HR x0, Stainless Steel, 40 mm 1 deg Upper UTS ConeNote: For use with P/N: 546242.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546213.941 | HR x0, Stainless Steel, 40 mm 2 deg Upper UTS ConeNote: For use with P/N: 546242.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546215.941 | HR x0, Stainless Steel, 40 mm 4 deg Upper UTS ConeNote: For use with P/N: 546242.001. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546014.901 | HR x0, DHR & AR-G2, Upper Temperature Sensor Draw RodNote: For use with UPP, EHP and UHP temperature systems.Requires UTS geometries. UTS drawrod comes standard with UPP, EHP and UHP temperature systems ONLY. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 534585.901 | HR x0 & DHR, Upper Temperature Sensor Draw Rod for use with the Upper Peltier Plate disposable/screw-in geometries Note: For use with UPP only. Requires UPP Screw-in or Disposable Upper geometry with Heat Spreader. | HR x0 EHP and UHP Stainless Steel Smart Swap 2 Upper UTS (Upper Temperature Sensor) Geometries | Rheology - HR 30, HR 20, HR 10 |
| 546239.001 | Stainless Steel, 4 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546240.001 | Stainless Steel, 8 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546261.001 | Stainless Steel, 20 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546241.001 | Stainless Steel, 25 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546242.001 | Stainless Steel, 40 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546259.001 | Stainless Steel, 8 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546255.001 | Stainless Steel, 25 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546256.001 | Stainless Steel, 40 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546265.001 | Stainless Steel, 8 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546266.001 | Stainless Steel, 25 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 546267.001 | Stainless Steel, 40 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - HR 30, HR 20, HR 10 |
| 534040.901 | HR x0 Environmental Test Chamber (ETC)Note: Maximum Temperature = 600 °C. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 533208.901 | HR x0, DHR ETC Oven Camera Viewer Option | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 405001.901 | ACS-2 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 405000.901 | ACS-3 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 405400.901 | HR x0, DHR ETC & DMA 850/ Q800 Combined Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 545056.901 | Combined Air Chiller Panel Upgrade KitNote: For use with DMA 850/Q800 Air Chiller Panel (P/N: 986400.901) to add functionality for use with a HR x0, DHR ETC. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - HR 30, HR 20, HR 10 |
| 534066.901 | HR x0 ETC Parallel Plate Accessory KitNote: Includes 25 mm stainless steel parallel plates. All other geometriespurchased separately. | HR x0 ETC Kits | Rheology - HR 30, HR 20, HR 10 |
| 534068.901 | HR x0 ETC Disposable Parallel Plate Accessory Kit | HR x0 ETC Kits | Rheology - HR 30, HR 20, HR 10 |
| 534069.901 | HR x0 ETC Pressure Sensitive Adhesives Accessory KitNote: Includes 8 and 25 mm stainless steel parallel plates. All other geometries purchased separately. | HR x0 ETC Kits | Rheology - HR 30, HR 20, HR 10 |
| 534070.901 | HR x0 ETC Asphalt Parallel Plate Accessory KitNote: Includes 8 and 25 mm stainless steel parallel plates and siliconeasphalt molds. | HR x0 ETC Kits | Rheology - HR 30, HR 20, HR 10 |
| 534067.901 | HR x0 ETC Torsion Clamp Accessory KitNote: Includes clamps for rectangular solid samples. Maximum SampleSize: Length = 50 mm, Width = 13 mm, Thickness = 5 mm. | HR x0 ETC Kits | Rheology - HR 30, HR 20, HR 10 |
| 534083.901 | HR x0 ETC Torsion Cylindrical Clamp Accessory KitNote: Includes collets to accommodate rods 1.5, 3, and 4.5 mm in diameter. Maximum Sample Length = 40 mm. | HR x0 ETC Kits | Rheology - HR 30, HR 20, HR 10 |
| 543602.941 | HR x0, Stainless Steel, 4 mm ETC PlateNote: For use with P/N: 527040.904 (Stainless Steel, 4 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543601.941 | HR x0, Stainless Steel, 8 mm ETC PlateNote: For use with P/N: 527080.904 (Stainless Steel, 8 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543606.941 | HR x0, Stainless Steel, 25 mm ETC PlateNote: For use with P/N: 527250.904 (Stainless Steel, 25 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543611.941 | HR x0, Stainless Steel, 40 mm ETC PlateNote: For use with P/N: 527400.903 (Stainless Steel, 40 mm ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543640.941 | HR x0, Stainless Steel, 8 mm Cross Hatched ETC PlateNote: For use with P/N: 527080.906 (Stainless Steel, Cross Hatched, 8 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543641.941 | HR x0, Stainless Steel, 25 mm Cross Hatched ETC PlateNote: For use with P/N: 527250.906 (Stainless Steel, Cross Hatched, 25 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543642.941 | HR x0, Stainless Steel, 40 mm Cross Hatched ETC PlateNote: For use with P/N: 527400.905 (Stainless Steel, Cross Hatched 40 mm ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543651.941 | HR x0, Stainless Steel, 25 mm, 0.1 rad, ETC ConeNote: For use with P/N: 527250.904 (Stainless Steel, 25 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543652.941 | HR x0, Stainless Steel, 25 mm, 0.04 rad, ETC ConeNote: For use with P/N: 527250.904 (Stainless Steel, 25 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543661.941 | HR x0, Stainless Steel, 25 mm, 2 deg, ETC ConeNote: For use with P/N: 527250.904 (Stainless Steel, 25 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543662.941 | HR x0, Stainless Steel, 25 mm, 4 deg, ETC ConeNote: For use with P/N: 527250.904 (Stainless Steel, 25 mm Stepped Lower ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543671.941 | HR x0, Stainless Steel, 40 mm, 2 deg, ETC ConeNote: For use with P/N: 527400.903 (Stainless Steel, 40 mm ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543672.941 | HR x0, Stainless Steel, 40 mm, 4 deg, ETC ConeNote: For use with P/N: 527400.903 (Stainless Steel, 40 mm ETC Plate). | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 543681.941 | HR x0, Stainless Steel, Upper ETC Smart Swap Torsion Geometry | HR x0 ETC Stainless Steel Smart Swap 2 Upper Single Piece Geometries | Rheology - HR 30, HR 20, HR 10 |
| 527040.904 | Stainless Steel, 4 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using an upper screwed shaft. | Stainless Steel Stepped (lower) Screw-in ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 527080.904 | Stainless Steel, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using an upper screwed shaft. | Stainless Steel Stepped (lower) Screw-in ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 527250.904 | Stainless Steel, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or an upper screw-inplate (P/N: 527250.903) and upper screwed shaft. | Stainless Steel Stepped (lower) Screw-in ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 527400.903 | Stainless Steel, 40 mm ETC Plate, use for upper and lowerNote: Use one with single piece upper shaft (P/N: 543331.001), or two requiredif used with upper screwed shaft. | Stainless Steel Stepped (lower) Screw-in ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 527080.906 | Stainless Steel, Cross Hatched, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper geometry (P/N: 543640.901) for DHR or (P/N: 543640.941) for HR x0. | Stainless Steel Stepped (lower) Screw-in ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 527250.906 | Stainless Steel, Cross Hatched, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper geometry (P/N: 543641.901) for DHR or (P/N: 543641.941) for HR x0. | Stainless Steel Stepped (lower) Screw-in ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 527400.905 | Stainless Steel, Cross Hatched 40 mm PlateNote: Use with upper and lower. Use with single piece upper geometry (P/N: 543642.901) for DHR or (P/N: 543642.941) for HR x0. | Stainless Steel Stepped (lower) Screw-in ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 526080.904 | HA Aluminum, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries. | Hard Anodized Aluminum Stepped (lower) ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 526250.904 | HA Aluminum, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries. | Hard Anodized Aluminum Stepped (lower) ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 526400.903 | HA Aluminum, 40 mm ETC PlateNote: For use for upper and lower (use with single piece upper shaft/geometries). | Hard Anodized Aluminum Stepped (lower) ETC Plates | Rheology - HR 30, HR 20, HR 10 |
| 543682.941 | HR x0, Smart Swap 2, Upper Disposable Plate Shaft for ETCNote: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523080.937 | Aluminum, 8 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523200.917 | Aluminum, 20 mm Disposable Plates (pkg. of 10)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523250.937 | Aluminum, 25 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523250.927 | Aluminum, 25 mm Disposable Plates (pkg. of 100)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523250.928 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 100)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523250.938 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note 1: Required for EHP and UHP upper and lower systems.Note 2: For use with upper ETC shaft - (HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523400.937 | Aluminum, 40 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 523400.927 | Aluminum, 40 mm Disposable Plates (pkg. of 100)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 527080.937 | Stainless Steel, 8 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 527250.937 | Stainless Steel, 25 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 527250.938 | Stainless Steel, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note 1: Required for EHP and UHP upper and lower systems.Note 2: For use with upper ETC shaft - (HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 527400.937 | Stainless Steel, 40 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - HR 30, HR 20, HR 10 |
| 543097.911 | ETC Melt Rings for 25 mm Lower Stepped ETC Plate (pkg. of 50) | ETC/EHP Accessories | Rheology - HR 30, HR 20, HR 10 |
| 578904.001 | Brass Scraper (for cleaning plates) | ETC/EHP Accessories | Rheology - HR 30, HR 20, HR 10 |
| 578905.001 | Brass Brush (for cleaning plates) | ETC/EHP Accessories | Rheology - HR 30, HR 20, HR 10 |
| 543311.901 | HR x0, DHR & AR-Series ETC Flow Meter Kit | ETC Flow Meter and Low Temp Kits for HR x0, DHR & AR-Series | Rheology - HR 30, HR 20, HR 10 |
| 543313.901 | HR x0, DHR & AR-Series Low Temperature Fittings with LN2 Dewar | ETC Flow Meter and Low Temp Kits for HR x0, DHR & AR-Series | Rheology - HR 30, HR 20, HR 10 |
| 543312.901 | HR x0, DHR & AR-Series Low Temperature Fittings without LN2 Dewar | ETC Flow Meter and Low Temp Kits for HR x0, DHR & AR-Series | Rheology - HR 30, HR 20, HR 10 |
| 534055.901 | HRx0 Auto-Trim Accessory | HRx0 Auto-Trim Accessory | Rheology - HR 30, HR 20, HR 10 |
| 406502.901 | HRx0 Auto-Trim Disposable Trimmers (pkg. of 20) | HRx0 Auto-Trim Accessory | Rheology - HR 30, HR 20, HR 10 |
| 406510.901 | HRx0 Auto-Trim Disposable Trimmers (pkg. of 100) | HRx0 Auto-Trim Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547200.901 | HR 30, HR 20, DHR-RH Accessory for Discovery Hybrid Rheometer | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547207.901 | HR x0, DHR-RH Parallel Plate Accessory Kit | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547210.901 | HR x0, DHR-RH Annular Ring Accessory | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547211.901 | HR x0, DHR-RH Surface Diffusion Accessory | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547208.901 | HR x0, DHR-RH Film/Fiber Tension Accessory Kit | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547278.901 | HR x0, DHR-RH 3-Point Bending Accessory Kit | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547282.901 | HR x0, DHR-RH Cantilever Bending Clamp Kit | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547279.901 | HR x0, DHR-RH Rectangular Torsion Clamp Accessory Kit | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547280.901 | HR x0, DHR-RH Tribo-rheometry, Ring Upper Geometry | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 547281.901 | HR x0, DHR-RH Tribo-rheometry Accessory Base Kit | HR 30, HR 20, DHR Relative Humidity (RH) Accessories | Rheology - HR 30, HR 20, HR 10 |
| 926021.001 | DMA Mode for HR 20, DHR Rheometers | DMA Mode for HR 30, HR 20 and DHR Rheometers | Rheology - HR 30, HR 20, HR 10 |
| 533890.901 | HR 30, HR 20, DHR 3-Point Bending Clamp Accessory Kit | DMA Mode for HR 30, HR 20 and DHR Rheometers | Rheology - HR 30, HR 20, HR 10 |
| 533892.901 | HR 30, HR 20, DHR Cantilever Bending Clamp Accessory Kit | DMA Mode for HR 30, HR 20 and DHR Rheometers | Rheology - HR 30, HR 20, HR 10 |
| 533894.901 | HR 30, HR 20, DHR Film/Fiber Tension Accessory Kit | DMA Mode for HR 30, HR 20 and DHR Rheometers | Rheology - HR 30, HR 20, HR 10 |
| 545201.901 | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) | Rheology - HR 30, HR 20, HR 10 |
| 404140.901 | HR x0, DHR Standard Drum Pair Set for EVA | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) | Rheology - HR 30, HR 20, HR 10 |
| 404140.903 | HR x0, DHR Knurled Surface Drum Pair Set for EVA | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) | Rheology - HR 30, HR 20, HR 10 |
| 404140.905 | HR x0, DHR Roughened Surface Drum Pair Set for EVA | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) | Rheology - HR 30, HR 20, HR 10 |
| 403056.901 | HR x0, DHR, ARES-G2 Replacement Clamps for EVA (pkg. of 4) | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) | Rheology - HR 30, HR 20, HR 10 |
| 547906.901 | SER3 Universal Testing Platform for HR 30, HR 20, DHR & AR | HR 30, HR 20, DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - HR 30, HR 20, HR 10 |
| 200974.002 | SER3 and SER2 Standard Drum Pair for HR x0, DHR & AR | HR 30, HR 20, DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - HR 30, HR 20, HR 10 |
| 200975.002 | SER3 and SER2 Knurled Surface Drum Pair Set for HR x0, DHR & AR | HR 30, HR 20, DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - HR 30, HR 20, HR 10 |
| 200976.002 | SER3 and SER2 Rough Surface Drum Pair Set for HR x0, DHR & AR | HR 30, HR 20, DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - HR 30, HR 20, HR 10 |
| 200977.002 | Securing Clamps for HR x0, DHR & AR SER3/2 and ARES-G2 SER3 (pkg. of 6) | HR 30, HR 20, DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - HR 30, HR 20, HR 10 |
| 200978.001 | SER3 and SER2 Dual Blade Cutter Assembly | HR 30, HR 20, DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - HR 30, HR 20, HR 10 |
| 200979.001 | Razor Blades for SER3 and SER2 Dual Blade Cutter Assembly (pkg. of 50) | HR 30, HR 20, DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - HR 30, HR 20, HR 10 |
| 534690.901 | HRx0 Powder Rheology Accessory | HRx0 Powder Rheology | Rheology - HR 30, HR 20, HR 10 |
| 534692.901 | HRx0 Powder Rheology Accessory for Temperature Control | HRx0 Powder Rheology | Rheology - HR 30, HR 20, HR 10 |
| 926026.001 | Powder Rheology Analysis for TRIOSNote: Requires Powder Accessory (P/N 534690.901). | HRx0 Powder Rheology | Rheology - HR 30, HR 20, HR 10 |
| 534677.941 | HRx0 Powder Compressibility | HRx0 Powder Rheology | Rheology - HR 30, HR 20, HR 10 |
| 534680.901 | HRx0 Powder Wall Friction | HRx0 Powder Rheology | Rheology - HR 30, HR 20, HR 10 |
| 534693.941 | HRx0 Powder Compressibility with Heat Break | HRx0 Powder Rheology | Rheology - HR 30, HR 20, HR 10 |
| 534698.901 | HRx0 Powder Wall Friction with Heat Break | HRx0 Powder Rheology | Rheology - HR 30, HR 20, HR 10 |
| 534047.901 | HR 30, HR 20 Orthogonal Superposition Accessory (OSP) | HR 30, HR 20, OSP Orthognal Superposition Accessory | Rheology - HR 30, HR 20, HR 10 |
| 534640.941 | HR 30, HR 20 OSP Upper Rotor, without windows | HR 30, HR 20, OSP Orthognal Superposition Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533608.901 | HR 30, HR 20 OSP Lower Cup | HR 30, HR 20, OSP Orthognal Superposition Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546800.901 | Optics Plate Accessory | HR x0, DHR Optics Plate Accessories | Rheology - HR 30, HR 20, HR 10 |
| 546800.902 | Optics Plate Accessory with Camera | HR x0, DHR Optics Plate Accessories | Rheology - HR 30, HR 20, HR 10 |
| 546801.901 | Optics Plate Accessory Replacement Glass Plates and O-rings | HR x0, DHR Optics Plate Accessories | Rheology - HR 30, HR 20, HR 10 |
| 546802.941 | HR x0, Stainless Steel, 40 mm Parallel Plate, Mirror Finish | HR x0, DHR Optics Plate Accessories | Rheology - HR 30, HR 20, HR 10 |
| 546803.941 | HR x0, Stainless Steel, 40 mm Upper UTS Plate, Mirror Finish | HR x0, DHR Optics Plate Accessories | Rheology - HR 30, HR 20, HR 10 |
| 546810.901 | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 546800.901 | Optics Plate Accessory | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 546814.901 | HR x0, DHR Counter-Rotating Optics Plate Accessory | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 546812.901 | HR x0, DHR Optics Plate Thin Cover Glass Kit | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 546809.901 | Modular Microscope Accessory Replacement Thin Glass Cover | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 546815.901 | HR x0, DHR MMA Piezo Scanner 100 μm | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 203274.001 | HR x0, DHR MMA Fluorescence Splitter | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 203273.001 | HR x0, DHR MMA Objective 20X Long Working Distance | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 203183.001 | HR x0, DHR MMA Objective 40X Long Working Distance | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 203135.001 | HR x0, DHR MMA Objective 20X Short Working Distance | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 203170.001 | HR x0, DHR MMA Objective 50X Short Working Distance, Oil | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 203171.001 | HR x0, DHR MMA Objective 100X Short Working Distance, Oil | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | Rheology - HR 30, HR 20, HR 10 |
| 534075.901 | HR 30, HR 20, Magneto-Rheology Accessory | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547106.901 | HR x0, DHR Magneto-Rheology Closed Loop Field Kit | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547107.901 | HR x0, DHR Magneto-Rheology Extended Temperature Kit | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547110.941 | HR x0, Magneto-Rheology Parallel Plate, 20 mm, Stainless Steel | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547111.941 | HR x0, Magneto-Rheology Cone, 20 mm, 2 deg, Stainless Steel | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547112.901 | HR x0, DHR Magneto-Rheology Lower Plate | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 203347.001 | Julabo Fluid Circulator, Wide Range (115VAC/60Hz) | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 203348.001 | Julabo Fluid Circulator, Wide Range (230VAC/50 Hz) | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 595010.901 | Julabo Fittings Kit | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 203349.001 | Thermal C5 Low Temperature Circulator Fluid (-35 °C to 110 °C) | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 203350.001 | Thermal C20S High Temperature Circulator Fluid (0 °C to 200 °C) | HR 30, HR 20 Magneto-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546701.901 | HR 30, HR 20, DHR Electro-Rheology Accessory (110VAC)Note: Requires HR x0 Electro-Rheology Shield and Safety Interlock Kit (P/N: 534060.901) for HR x0 or DHR Electro-Rheology Shield and Safety Interlock Kit (P/N: 533604.901) for DHR. | HR 30, HR 20, DHR Electro-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546701.902 | HR 30, HR 20, DHR Electro-Rheology Accessory (220VAC)Note: Requires HR x0 Electro-Rheology Shield and Safety Interlock Kit (P/N: 534060.901) for HR x0 or DHR Electro-Rheology Shield and Safety Interlock Kit (P/N: 533604.901) for DHR. | HR 30, HR 20, DHR Electro-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 534060.901 | HR x0 Electro-Rheology Shield and Safety Interlock Kit | HR 30, HR 20, DHR Electro-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546761.941 | HR x0 Electro-Rheology, Parallel Plate, 25 mm | HR 30, HR 20, DHR Electro-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546705.941 | HR x0 Electro-Rheology, Parallel Plate, 40 mm | HR 30, HR 20, DHR Electro-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546762.941 | HR x0 Electro-Rheology, 25 mm DIN Rotor | HR 30, HR 20, DHR Electro-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 545630.902 | HR x0, DHR Electro-Rheology, Stainless Steel Concentric Cylinders Cup,30 mm diameter | HR 30, HR 20, DHR Electro-Rheology Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547920.901 | HR x0, DHR & AR-G2 Immobilization Cell Accessory | HR x0, DHR & AR-G2 Immobilization Cell Accessory | Rheology - HR 30, HR 20, HR 10 |
| 547962.001 | Replacement Sieve for Immobilization Cell | HR x0, DHR & AR-G2 Immobilization Cell Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533242.901 | Tribo-Rheometry Accessory Base Kit | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533279.901 | HR x0, DHR & AR-G2, Tribo-Rheometry Coupling Adapter, Short | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533279.902 | HR x0, DHR & AR-G2, Tribo-Rheometry Coupling Adapter, Long | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533273.902 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Short | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533273.901 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Medium | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533273.903 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Long | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533283.901 | Tribo-Rheometry, Ring on Plate Upper Geometry Holder | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533290.901 | Tribo-Rheometry, 3 Balls on Plate Upper Geometry Holder | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533249.901 | Tribo-Rheometry, 5/16” Truncated SST Balls (pkg. of 12) | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533250.901 | Tribo-Rheometry, 1/2” SST Balls (pkg. of 25) | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533284.901 | Tribo-Rheometry, Ring Upper Geometry (pkg. of 3) | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533274.901 | Tribo-Rheometry, Ball on 3 Balls Lower Geometry | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533281.901 | Tribo-Rheometry, SST Cup 45 mm Lower Geometry (pkg. of 2) | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533282.901 | Tribo-Rheometry, 3 Plates Lower Geometry | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533291.901 | Tribo-Rheometry, Ball on 3 Plates SST Test Plates (pkg. of 30) | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 523400.907 | Aluminum, 40 mm Disposable Plate | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533300.901 | HR x0, DHR & AR-G2, ETC, Tribo-Rheometry Lower Geometry Holder | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 532080.901 | HR x0, DHR, ARES-G2, APS, Tribo-Rheometry Lower Geometry Holder | HR x0, DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533613.901 | HR 30, HR 20, DHR Rheo-Raman AccessoryNote: Requires iXR Raman Spectrometer, sold separately.Also requires the following:1. Upper Heated Plate (P/N: 545803.901) for DHRor (P/N: 534063.901) for HR x02. Appropriate UTS-compatible upper geometry,Rheo-Raman microscope objective (P/N: 271904.001),and Rheo-Raman optical table (P/N: 271920.001) for DHRor (272004.001) for HR x0.Requires service engineer installation quoted separately. | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - HR 30, HR 20, HR 10 |
| 272004.001 | HR x0, DHR Rheo-Raman Optical Table | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - HR 30, HR 20, HR 10 |
| 271904.001 | HR x0, DHR Rheo-Raman Objective 20X Long Working Distance | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - HR 30, HR 20, HR 10 |
| 533611.901 | Rheo-Raman Accessory Replacement Glass Plates and O-rings | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546601.901 | HR 30, HR 20, DHR Dielectric AccessoryNote: Requires appropriate geometries and customer-supplied LCR meter. | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546602.901 | HR x0, DHR 25 mm Upper Dielectric GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546603.901 | HR x0, DHR 25 mm Lower Dielectric GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546610.901 | HR x0, DHR Upper Dielectric Disposable GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546615.901 | HR x0, DHR Lower Dielectric Disposable GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 613.04946 | Keysight E4980A LCR MeterNote: For HR x0, DHR and ARES-G2, RSA-G2 DETA: frequency range: 20Hz. to 2MHz.; AC test signal (potential) 0.005 to 20 Volts (115/230VAC; 50/60Hz). | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 203330.001 | Keysight E4980AL-102 LCR MeterNote: For HR x0, DHR and ARES-G2, RSA-G2 DETA: frequency range: 20Hz to 1MHz; AC test signal (potential) 0.001 to 2 Volts (115/230VAC; 50/60Hz). | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 534076.901 | DHR to HR x0 Dielectric Accessory Upgrade Kit | HR 30, HR 20, DHR Dielectric Accessory | Rheology - HR 30, HR 20, HR 10 |
| 534855.901 | HRx0, DHR Rheo-Impedance Spectroscopy Accessory parallel plate Note: Requires Advanced Peltier Plate (P/N 533209.901) and LCR Meter. | Rheo-Impedance Spectroscopy Accessory | Rheology - HR 30, HR 20, HR 10 |
| 206442.001 | Hioki LCR Meter IM3536Note: For use with Rheo-Impedance Spectroscopy Accessory (534855.901), or Dielectric Accessory (546601.901). | Rheo-Impedance Spectroscopy Accessory | Rheology - HR 30, HR 20, HR 10 |
| 545618.901 | HR x0, DHR & AR-Series Smart Swap Torsion Immersion KitNote: Requires Peltier Fluid Jacket (P/N: 533201.901). | HR x0, DHR & AR-Series Torsion Immersion | Rheology - HR 30, HR 20, HR 10 |
| 547004.901 | HR x0, DHR & AR-Series Generic Container HolderNote: Suitable for containers with OD in the range of 30 mm to 80 mm. | HR x0, DHR & AR-Series Generic Container Holder | Rheology - HR 30, HR 20, HR 10 |
| 531056.901 | HR x0, DHR & AR-Series Blank Smart Swap Base | HR x0, DHR & AR-Series Blank Smart Swap Base | Rheology - HR 30, HR 20, HR 10 |
| 533216.901 | HR x0, DHR Pressure Cell High Temp Note: Requires Smart Swap Peltier Concentric Cylinder Jacket (P/N: 533201.901) or Smart Swap Electrically Heated Concentric Cylinder (P/N: 547310.901). | HR x0, DHR Pressure Cell | Rheology - HR 30, HR 20, HR 10 |
| 402828.901 | Starch Rotor for HR x0, DHR Pressure Cell (P/N: 533216.901) | HR x0, DHR Pressure Cell | Rheology - HR 30, HR 20, HR 10 |
| 402815.901 | Vane Rotor for HR x0, DHR Pressure Cell (P/N: 533216.901) | HR x0, DHR Pressure Cell | Rheology - HR 30, HR 20, HR 10 |
| 534064.901 | DHR to HRx0 Pressure Cell Upgrade Kit | HR x0, DHR Pressure Cell | Rheology - HR 30, HR 20, HR 10 |
| 547050.901 | HR x0, DHR High Sensitivity Pressure CellNote: Requires the Concentric Cylinder Peltier Jacket (P/N 533201.901). | HR x0, DHR High Sensitivity Pressure Cell | Rheology - HR 30, HR 20, HR 10 |
| 402817.901 | Vane rotor for HR x0, DHR & ARES-G2 High Sensitivity Pressure Cell (HSPC)Note: Requires HR x0, DHR or ARES-G2 High Sensitivity Pressure Cell - HR x0, DHR (P/N: 547050.901) or ARES-G2 (P/N: 402818.901). | HR x0, DHR High Sensitivity Pressure Cell | Rheology - HR 30, HR 20, HR 10 |
| 547052.901 | Starch rotor for HR x0, DHR High Sensitivity Pressure Cell (HSPC)Note: Requires HR x0, DHR High Sensitivity Pressure Cell (P/N: 547050.901). | HR x0, DHR High Sensitivity Pressure Cell | Rheology - HR 30, HR 20, HR 10 |
| 534065.901 | HR x0, Starch Pasting Cell | HR x0, Smart Swap 2 Starch Pasting Cell and Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 545712.941 | HR x0, Replacement Rotor for Starch Pasting Cell | HR x0, Smart Swap 2 Starch Pasting Cell and Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 545713.941 | HR x0, HA Aluminum Conical Rotor For Starch Pasting Cell | HR x0, Smart Swap 2 Starch Pasting Cell and Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 545723.001 | Replacement Cup for Starch Pasting Cell | HR x0, Smart Swap 2 Starch Pasting Cell and Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 546301.901 | HR x0, DHR-3, DHR-2 & AR-Series, UV Light Guide Accessory withoutUV Light Source | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 546303.901 | HR x0, DHR-3, DHR-2 & AR-Series, UV Light Guide Accessory withUV Light Source | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 533217.901 | HR x0, DHR-3 & DHR-2, 365 nm LED UV-Curing Accessory | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 533218.901 | HR x0, DHR-3 & DHR-2, 455 nm LED Blue Light Curing Accessory | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 546384.901 | UV-Curing Accessory Plate Rubber Ring Plate Guards | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 546320.941 | HR x0, Stainless Steel, Smart Swap 2 Disposable Plate ShaftNote: For Peltier Plate and UV Accessories. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 403153.001 | 20 mm Quartz Plate for HR x0/DHR/AR and ARES UV-Curing OptionNote: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/DHR/AR-UV option. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 403064.901 | 20 mm diameter Disposable Acrylic Plates (pkg. of 10)Note: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/HR/AR-UV option. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 200400.001 | Replacement 5 mm diameter light guideNote: For HR x0, ARES and AR UV-Curing and Photo-Curing Options. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 935014.901 | PCA/UV External Filter Adapter Accessory KitNote: Allows use of external filters with the PCA (P/N: 935000.901). | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 935009.001 | Filter, External, 320 - 480 nmNote: For the Omnicure S-2000 with external filter adapter. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 935009.002 | Filter, External, 320 - 390 nmNote: For the Omnicure S-2000 with external filter adapter. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 935009.004 | Filter, External, 400 - 500 nmNote: For the Omnicure S-2000 with external filter adapter. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 935009.003 | Filter, External, 365 nmNote: For the Omnicure S-2000 with external filter adapter. | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 546316.901 | Replacement radiometer for UV Light Guide Accessory | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 546317.901 | Replacement radiometer for UV LED Accessory | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 534590.901 | HR x0, DHR UPP Cover for UV Curing Accessories | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 533405.901 | HR x0, DHR UHP Cover for UV Curing Accessories | HR x0, DHR & AR UV-Curing Option | Rheology - HR 30, HR 20, HR 10 |
| 534073.901 | HR 30, HR 20, Smart Swap 2, Double Wall Ring Interfacial (DWR) Rheology System for Standard Peltier PlateNote 1: Includes DWR Pt/Ir Ring Geometry and Delrin Trough. Note 2: Option requires standard Peltier plate (P/N: 533210.901).Strongly recommend HR x0 Peltier Plate Draft Shield (P/N: 534465.901). | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534072.901 | HR 30, HR 20, Smart Swap 2, Double Wall Ring Interfacial (DWR) Rheology System for Advanced Peltier PlateNote 1: Includes DWR Pt/Ir Ring Geometry and Delrin Trough.Note 2: Option requires Advanced Peltier Plate (P/N: 533209.901).Strongly recommend HR x0 Peltier Plate Draft Shield (P/N: 534465.901). | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534074.901 | HR 30, HR 20 Smart Swap 2 Double Wall Du Nouy Ring (DDR) InterfacialRheology SystemNote: Option requires standard Peltier Plate (P/N: 533210.901).Strongly recommend HR x0 Peltier Plate Draft Shield (P/N: 534465.901). | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 533601.901 | HR x0, DHR Double Wall Ring (DWR) Interfacial Exchange Cell | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 271902.001 | HR x0, DHR Double Wall Ring (DWR) Interfacial Exchange Cell Syringe Pump | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 533624.901 | Interfacial Exchange Cell Replacement Tubing and Syringes | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 545911.941 | HR x0 Interfacial Geometry Holder | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 545950.001 | HR x0, DHR & AR-G2, Double Wall Ring, Platinum-IrNote: Replacement ring - does NOT include geometry holder. | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 530021.001 | HR x0, DHR & AR-G2, PT-IR Du Nouy Ring Geometry for Dynamic Interfacial SystemNote: Replacement ring - does NOT include geometry holder. | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 545908.901 | HR x0, DHR-3, DHR-2 & AR-G2, Double Wall Ring Window Kit | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534071.901 | HR x0, Smart Swap 2, Interfacial Bicone Accessory | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 545922.001 | HR x0, DHR, AR-G2 and AR 2000, 45 mm Diameter Teflon Interfacial BiconeCup | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 545934.941 | HR x0 Smart Swap 2 Interfacial Bicone Geometry | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 578155.001 | Sample - Vessel 70 mm diameter (glass cup) | HR 30, HR 20 Interfacial Rheology Systems and Accessories | Rheology - HR 30, HR 20, HR 10 |
| 533222.901 | HR 30, HR 20, DHR-3, DHR-2 SALS Accessory | HR x0, DHR, AR-G2 and AR 2000ex SALS Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546417.941 | HR x0, Smart Swap 2, Quartz 50 mm Plate | HR x0, DHR, AR-G2 and AR 2000ex SALS Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546484.001 | SALS Polystyrene Alignment Material | HR x0, DHR, AR-G2 and AR 2000ex SALS Accessory | Rheology - HR 30, HR 20, HR 10 |
| 546483.001 | SALS Neutral Density Filter Kit | HR x0, DHR, AR-G2 and AR 2000ex SALS Accessory | Rheology - HR 30, HR 20, HR 10 |
| 554103.901 | HR x0, DHR & AR-Series Smart Swap Asphalt Submersion Cell | HR x0, DHR & AR-Series Smart Swap Asphalt Submersion Cell | Rheology - HR 30, HR 20, HR 10 |
| 500030.901 | Membrane Compressed Air Dryer | Air Supply Accessories | Rheology - HR 30, HR 20, HR 10 |
| 575016.901 | HR x0, DHR, and AR-Series Oil-Free Compressor (240VAC/50Hz) | Air Supply Accessories | Rheology - HR 30, HR 20, HR 10 |
| 534460.901 | HR x0 Manifold Mounting Adapter for EHP/ UHP/ Dry Asphalt/ VortexCooler | HR x0 Manifold Mounting Adapter | Rheology - HR 30, HR 20, HR 10 |
| 543033.001 | Asphalt Cylindrical Torsion End Pieces | Cylindrical Torsion | Rheology - HR 30, HR 20, HR 10 |
| 554024.901 | HR x0, DHR & AR-Series Automated Asphalt Temperature Calibration KitNote: Requires PC with USB port and TRIOS or Rheology AdvantageSoftware Version 5.7. or later. | Automated Temperature Calibration | Rheology - HR 30, HR 20, HR 10 |
| 554003.901 | Asphalt Submersion Cell Replacement Filter Material, 1 Package | HR x0, DHR & AR Asphalt Submersion Cell | Rheology - HR 30, HR 20, HR 10 |
| 554004.901 | Replacement Asphalt Submersion Cell Plate Removal Tool | HR x0, DHR & AR Asphalt Submersion Cell | Rheology - HR 30, HR 20, HR 10 |
| 554007.901 | Asphalt Sample Molds, 1 Pair | HR x0, DHR & AR Asphalt Submersion Cell | Rheology - HR 30, HR 20, HR 10 |
| 554001.901 | Stainless Steel, 8 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - HR 30, HR 20, HR 10 |
| 554008.901 | Stainless Steel, 12 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - HR 30, HR 20, HR 10 |
| 554002.901 | Stainless Steel, 25 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - HR 30, HR 20, HR 10 |
| 554019.902 | HA Aluminum, 8 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - HR 30, HR 20, HR 10 |
| 554020.902 | HA Aluminum, 25 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - HR 30, HR 20, HR 10 |
| 952377.901 | Fungicide for Peltier Reservoir | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 532067.901 | HR x0, DHR & AR-Rheometer Vibration Isolation Pads | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 203854.901 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 1) | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 203854.902 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 4) | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - HR 30, HR 20, HR 10 |
| 545852.001 | 3 mm UHP Plate Trimming Tool (for use with Standard Peltier Plate) | Stainless Steel Sample Trimming Tools | Rheology - HR 30, HR 20, HR 10 |
| 545851.001 | 6 mm UHP Dry Asphalt System Trimming Tool(for use with Stepped Peltier) | Stainless Steel Sample Trimming Tools | Rheology - HR 30, HR 20, HR 10 |
| 250024.001 | Low Viscosity Standard Oil (S60) ~ 100 mPa.s (cP) @ 25 °C | Standard Oils | Rheology - HR 30, HR 20, HR 10 |
| 250024.002 | High Viscosity Standard Oil (S600) ~ 1100 mPa.s (cP) @ 25 °C | Standard Oils | Rheology - HR 30, HR 20, HR 10 |
| 201261.001 | DSR Standard N2700000SP Standard Oil | Standard Oils | Rheology - HR 30, HR 20, HR 10 |
| 575105.901 | A Handbook of Elementary Rheology, Howard A. Barnes | Rheology Text Books | Rheology - HR 30, HR 20, HR 10 |
| 575103.901 | Introduction to Rheology, H.A. Barnes, J.F. Hutton and K. Walters | Rheology Text Books | Rheology - HR 30, HR 20, HR 10 |
| 402046.901 | AutoPilot Option for TRIOS Software | DHR and AR-Series Software | Rheology - DHR & AR |
| 999801.064 | AutoPilot Basic Script Writing Service | DHR and AR-Series Software | Rheology - DHR & AR |
| 999801.066 | AutoPilot Advanced Script Writing Service | DHR and AR-Series Software | Rheology - DHR & AR |
| 926018.001 | LAOS and FT RHEOLOGY for TRIOSNote: Large Amplitude Oscillatory Shear and Fourier Transform Rheology Software for TRIOS. | DHR and AR-Series Software | Rheology - DHR & AR |
| 926019.001 | Rheology Polymer Library for TRIOSNote: Includes software for Molecular Weight Distribution Calculations. | DHR and AR-Series Software | Rheology - DHR & AR |
| 925714.001 | Software Advantage Navigator | DHR and AR-Series Software | Rheology - DHR & AR |
| 925715.001 | Enhanced Polymer Library for Advantage | DHR and AR-Series Software | Rheology - DHR & AR |
| 250000.001 | HR x0, DHR & AR Rheometer Filter/Regulator | Installation and Peltier Kits | Rheology - DHR & AR |
| 403209.901 | Air Cooled Peltier Circulator (110/220VAC; 50/60Hz)Note: For use with HR x0, DHR, AR and ARES Rheometers. | Installation and Peltier Kits | Rheology - DHR & AR |
| 404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. | Installation and Peltier Kits | Rheology - DHR & AR |
| 534900.901 | HR x0, DHR Glovebox Feedthrough KitNote 1: For use with DHR and HR x0 models.Note 2: If the glovebox kit is offered as accessory for an existing HR or DHR, part number 999800.529 covering for the installation of the existing HR/DHR in a glovebox must be included in the quote. | Installation and Peltier Kits | Rheology - DHR & AR |
| 533210.901 | HR x0, DHR Smart Swap Peltier PlateNote: Temperature Range = 200 °C. | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 533209.901 | HR x0, DHR Smart Swap Advanced Peltier Plate | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534555.901 | HR x0, DHR Smart Swap High temperature Advanced Peltier Plate | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 546502.901 | HR x0, DHR Dual-Stage Smart Swap Peltier PlateNote: Temperature Range = -45 °C to 200 °C. | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 533211.901 | HR x0, DHR Stepped Peltier with Screw-in PlateNote: Temperature Range = 200 °C. | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 533212.901 | HR x0, DHR Smart Swap Disposable Stepped Peltier PlateNote: Temperature Range = 200 °C.DHR requires Disposable Plate Shaft (P/N: 546320.901).HR x0 requires Disposable Plate Shaft (P/N: 546320.941). | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 547910.901 | HR x0, DHR & AR-Series Peltier Plate Immersion CellNote: Attaches to HR x0, DHR & AR-Series Smart Swap Peltier Plate.Allows testing of samples in parallel plate and cone and plate geometries while fully immersed in liquid. | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 547902.901 | HR x0, DHR, AR-Series, and ARES-G2 Peltier Camera Viewer OptionNote: Camera viewer is NOT compatible with AR 2000 model. | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 547901.901 | HR x0, DHR & AR-Series Peltier Plate Camera Viewer Mounting KitNote: Customer must supply USB Web camera. Camera viewer is NOTcompatible with AR 2000 model. | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 533231.901 | AR to HR x0, DHR Quick-Connect Plumbing AdapterNote: Required for using existing accessories on a HR x0, DHR instrument(includes 2 large male fittings). | DHR & AR Rheometer Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 529613.901 | Hard Anodized Split Solvent Trap Cover and Location Ring for StandardPeltier Plate | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 517105.901 | Insulated Solvent Trap Cover and Location Ring (for standard PeltierPlate)Note: NOT FOR USE WITH STEPPED PELTIER. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 529612.901 | Purge Gas Cover and Location Ring for Standard Peltier Plate | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 531070.901 | Hard Anodized Aluminum Solvent Trap for Advanced Peltier Plate | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 531035.901 | Insulated Solvent Trap for Advanced Peltier PlateNote: Includes Solvent Trap Cover and Location Ring. | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 531038.901 | Purge Gas Cover for Advanced Peltier Plate | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 529750.901 | 25 mm Plate Insulating Thermal Cover for Peltier Plate | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 570059.901 | Hard Anodized Aluminum Cover Plate (with Ring Adapter),Cross Hatched, 40 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 570011.901 | Hard Anodized Aluminum Cover Plate (with Ring Adapter),Cross Hatched, 60 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 517040.901 | Stainless Steel Cover Plate, Cross Hatched, 40 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 517060.901 | Stainless Steel Cover Plate, Cross Hatched, 60 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 545430.901 | Stainless Steel Peltier Plate Cover | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 545431.901 | Stainless Steel Peltier Plate Cover, Raised Center, 20 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 545433.901 | Stainless Steel Peltier Plate Cover, Raised Center, 60 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 545435.901 | Titanium Peltier Plate Cover, Raised Center, 40 mm | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 533240.901 | DHR Peltier Plate Draft Shield | Solvent Trap, Purge Gas, Thermal, and Lower Plate Covers for Peltier Plate | Rheology - DHR & AR |
| 402751.902 | HR x0, DHR, ARES-G2, APS, Quick Change Plate Holder | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 534595.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 4 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402625.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 8 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402491.901 | HR x0, DHR, ARES-G2, Stainless Steel, 20 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402624.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 25 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402623.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 40 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402622.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 50 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402493.901 | HR x0, DHR, ARES-G2, Hard Anodized Aluminum, 20 mm, Quick ChangePlate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402630.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 25 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402631.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 40 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402632.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 50 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402633.901 | HR x0, DHR, ARES-G2, APS, Titanium, 25 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402634.901 | HR x0, DHR, ARES-G2, APS, Titanium, 50 mm, Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402811.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 8 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402494.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 20 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402770.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 25 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402769.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 40 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402627.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 8 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402492.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 20 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402628.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 25 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402629.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 40 mm,Quick Change Plate | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402681.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 42 mm Dia., 15 mmEdge Height, Immersion CupNote: Includes two removable sidewalls (one aluminum and one clearpolycarbonate) for easy sample loading and trimming. | DHR Quick Change Plate Holders and Quick Change Plates | Rheology - DHR & AR |
| 402611.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 8 mm, Quick Change DisposablePlate (pkg. of 20) | DHR Disposable Quick Change Plates and Holder | Rheology - DHR & AR |
| 402612.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 20 mm, Quick Change DisposablePlate (pkg. of 20) | DHR Disposable Quick Change Plates and Holder | Rheology - DHR & AR |
| 402613.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 25 mm, Quick Change DisposablePlate (pkg. of 20) | DHR Disposable Quick Change Plates and Holder | Rheology - DHR & AR |
| 402751.901 | HR x0, DHR, ARES-G2, APS, Quick Change Disposable Plate Holder | DHR Disposable Quick Change Plates and Holder | Rheology - DHR & AR |
| 532066.901 | AR-XXXX to HR x0, DHR & AR-G2 Geometry Adapter KitNote: For use only with standard Peltier Plate geometries. | DHR & AR-G2 Custom and Standard Geometry Adapters | Rheology - DHR & AR |
| 545904.901 | DHR & AR-G2 Rheometer Custom Geometry Adapter | DHR & AR-G2 Custom and Standard Geometry Adapters | Rheology - DHR & AR |
| 511204.906 | DHR & AR-G2, Stainless Steel, 20 mm, 1 deg Cone, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 511206.906 | DHR & AR-G2, Stainless Steel, 20 mm, 2 deg Cone, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 511207.906 | DHR & AR-G2, Stainless Steel, 20 mm, 4 deg Cone, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 511080.906 | DHR & AR-G2, Stainless Steel, 8 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 511120.906 | DHR & AR-G2, Stainless Steel, 12 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 511200.906 | DHR & AR-G2, Stainless Steel, 20 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 511250.906 | DHR & AR-G2, Stainless Steel, 25 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 517080.906 | DHR & AR-G2, Stainless Steel, Cross Hatched, 8 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 517200.906 | DHR & AR-G2, Stainless Steel, Cross Hatched, 20 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 519080.906 | DHR & AR-G2, Stainless Steel, Sandblasted, 8 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 519250.906 | DHR & AR-G2, Stainless Steel, Sandblasted, 25 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 519200.906 | DHR & AR-G2, Stainless Steel, Sandblasted, 20 mm Plate, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with No Solvent Trap (NST) | Rheology - DHR & AR |
| 511203.905 | DHR & AR-G2, Stainless Steel, 20 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511204.905 | DHR & AR-G2, Stainless Steel, 20 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511206.905 | DHR & AR-G2, Stainless Steel, 20 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511207.905 | DHR & AR-G2, Stainless Steel, 20 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511403.905 | DHR & AR-G2, Stainless Steel, 40 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511404.905 | DHR & AR-G2, Stainless Steel, 40 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511406.905 | DHR & AR-G2, Stainless Steel, 40 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511407.905 | DHR & AR-G2, Stainless Steel, 40 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511504.905 | DHR & AR-G2, Stainless Steel, 50 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511506.905 | DHR & AR-G2, Stainless Steel, 50 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511603.905 | DHR & AR-G2, Stainless Steel, 60 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511604.905 | DHR & AR-G2, Stainless Steel, 60 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511606.905 | DHR & AR-G2, Stainless Steel, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511607.905 | DHR & AR-G2, Stainless Steel, 60 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 511200.905 | DHR & AR-G2, Stainless Steel, 20 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 511400.905 | DHR & AR-G2, Stainless Steel, 40 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 511500.905 | DHR & AR-G2, Stainless Steel, 50 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 511600.905 | DHR & AR-G2, Stainless Steel, 60 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 517200.905 | DHR & AR-G2, Stainless Steel, Cross Hatched, 20 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 517400.905 | DHR & AR-G2, Stainless Steel, Cross Hatched, 40 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 517600.905 | DHR & AR-G2, Stainless Steel, Cross Hatched, 60 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 519200.905 | DHR & AR-G2, Stainless Steel, Sandblasted, 20 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 519400.905 | DHR & AR-G2, Stainless Steel, Sandblasted, 40 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 519600.905 | DHR & AR-G2, Stainless Steel, Sandblasted, 60 mm PlateNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 512206.906 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mm, 2 deg Cone, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512206.905 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512406.905 | DHR & AR-G2, Stainless Steel, Composite HB, 40 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512407.905 | DHR & AR-G2, Stainless Steel, Composite HB, 40 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512606.905 | DHR & AR-G2, Stainless Steel, Composite HB, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512607.905 | DHR & AR-G2, Stainless Steel, Composite HB, 60 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Cone Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512080.906 | DHR & AR-G2, Stainless Steel, Composite HB, 8 mm, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512200.906 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mm, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512200.905 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mmNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512250.906 | DHR & AR-G2, Stainless Steel, Composite HB, 25 mm, NSTNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512400.905 | DHR & AR-G2, Stainless Steel, Composite HB, 40 mmNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - DHR & AR |
| 512600.905 | DHR & AR-G2, Stainless Steel, Composite HB, 60 mmNote: For use with DHR & AR-G2 only. | Stainless Steel Peltier Plate Geometries with Composite Heat Break | Rheology - DHR & AR |
| 520400.905 | DHR & AR-G2, Titanium, 40 mm PlateNote: For use with DHR & AR-G2 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 520600.905 | DHR & AR-G2, Titanium, 60 mm PlateNote: For use with DHR & AR-G2 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 520604.905 | DHR & AR-G2, Titanium, 60 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 520606.905 | DHR & AR-G2, Titanium, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Titanium Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 513204.905 | DHR & AR-G2, HA Aluminum, 20 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513206.905 | DHR & AR-G2, HA Aluminum, 20 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513207.905 | DHR & AR-G2, HA Aluminum, 20 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513404.905 | DHR & AR-G2, HA Aluminum, 40 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513406.905 | DHR & AR-G2, HA Aluminum, 40 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513407.905 | DHR & AR-G2, HA Aluminum, 40 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513603.905 | DHR & AR-G2, HA Aluminum, 60 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513604.905 | DHR & AR-G2, HA Aluminum, 60 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513606.905 | DHR & AR-G2, HA Aluminum, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513607.905 | DHR & AR-G2, HA Aluminum, 60 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Cone Geometries with Solvent Trap | Rheology - DHR & AR |
| 513200.905 | DHR & AR-G2, HA Aluminum, 20 mm PlateNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 513400.905 | DHR & AR-G2, HA Aluminum, 40 mm PlateNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 513600.905 | DHR & AR-G2, HA Aluminum, 60 mm PlateNote: For use with DHR & AR-G2 only. | Hard Anodized Aluminum (HA AL) Peltier Plate Geometries with Solvent Trap | Rheology - DHR & AR |
| 533201.901 | HR x0, DHR Smart Swap Concentric Cylinder Peltier JacketNote: Does not include cup or rotor. Includes cover. | Concentric Cylinder Jackets for DHR & AR-G2 and AR 2000 | Rheology - DHR & AR |
| 547310.901 | HR x0, DHR & AR-Series Smart Swap Concentric Cylinder ElectricallyHeated Jacket | Concentric Cylinder Jackets for DHR & AR-G2 and AR 2000 | Rheology - DHR & AR |
| 547308.901 | HR x0, DHR & AR-Series Electrically Heated Jacket Air Cooling Option | Concentric Cylinder Jackets for DHR & AR-G2 and AR 2000 | Rheology - DHR & AR |
| 546011.901 | DHR & AR-G2, HA Aluminum Conical DIN Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546016.901 | DHR & AR-G2, HA Aluminum Recessed End Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546012.901 | DHR & AR-G2, Stainless Steel, Conical DIN Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546009.901 | DHR & AR-G2, Stainless Steel, Conical DIN Rotor, Sandblasted,Rad = 14 mm, Height = 42 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546017.901 | DHR & AR-G2, Stainless Steel Recessed End Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 545043.901 | DHR & AG-G2, Stainless Steel, Conical Rotor, Rad = 7.5 mmNote 1: Appropriate for measurements of crumb-rubber modified asphalt.Note 2: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546026.901 | DHR & AR-G2, Stainless Steel Vaned Rotor, Rad = 14 mm, Height = 42 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546027.901 | DHR & AR-G2, Wide Gap Vaned Rotor with Heat Break, Rad = 7.5 mm,Height = 38 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546048.901 | DHR & AR-G2, Stainless Steel Double Gap Rotor, Inner Rad = 16 mm,Outer Rad = 17.5 mm, Height = 53 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546049.901 | DHR & AR-G2, HA Aluminum Double Gap Rotor, Inner Rad = 16 mm,Outer Rad = 17.5 mm, Height = 53 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546021.901 | DHR & AR-G2, Ver 1 HA Aluminum Double Gap Rotor,Inner Rad = 20.38 mm, Outer Rad = 21.96, Height = 59.5 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 546022.901 | DHR & AR-G2, Ver 1 Stainless Steel Double Gap Rotor, InnerRad = 20.38 mm, Outer Rad = 21.96, Height = 59.5 mmNote: For use with DHR & AR-G2 only. | DHR & AR-G2 Smart Swap Rotors for Concentric Cylinders | Rheology - DHR & AR |
| 545700.901 | HA Aluminum Standard Concentric Cylinder Cup with CapNote: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545696.901 | Stainless Steel Standard Concentric Cylinder Cup with Cap | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 546046.901 | Stainless Steel, Single Gap Cup, Sandblasted, Rad = 15.2 mm | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 546050.901 | HA Aluminum Double Gap Concentric Cylinder Cup,Inner Rad = 15.1 mm, Outer Rad = 18.5 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 546045.901 | Stainless Steel Double Gap Concentric Cylinder Cup,Diameter = 30.4 mm, Outer Rad = 18.5 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545612.901 | Ver 1 HA Aluminum Double Gap Concentric Cylinder Cup,Inner Rad = 20.00 mm, Outer Rad = 22.38 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545613.901 | Ver 1 Stainless Steel Double Gap Concentric Cylinder Cup,Inner Rad = 20.00 mm, Outer Rad = 22.38 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545615.901 | HA Aluminum Large Diameter Concentric Cylinder Cup (Rad = 22 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545642.001 | Stainless Steel Blank PlugNote: For HR x0, DHR & AR-Series Peltier Jacket Double Gap Cup. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545610.901 | HA Aluminum Grooved Concentric Cylinder CupNote: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545666.901 | HA Aluminum Starch Rotor Concentric Cylinder Cup (Rad = 18.5 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 547305.901 | Stainless Steel Single-Piece Concentric Cylinder Cup | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545050.901 | Disposable Concentric Cylinder KitNote: For Peltier and Electrically Heated Jackets. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545075.901 | Disposable Concentric Cylinder Cups (pkg. of 20) | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545609.901 | Peltier Concentric Cylinder Solvent TrapNote: NOT for use with Double Wall Concentric Cylinder System. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 545626.001 | Split CoverNote: For HR x0, DHR & AR-Series Smart Swap Peltier Concentric Cylinders. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 578096.001 | Replacement O-RingNote: For Double Gap Concentric Cylinder Cup. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 578148.001 | Replacement O-RingNote: For Standard and Grooved Concentric Cylinder Cups with Cap. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 270323.007 | High Temperature O-RingNote: For SST Double Gap Concentric Cylinder Cup. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 270323.008 | High Temperature O-RingNote: For SST Standard Concentric Cylider Cup with Cap. | DHR & AR-Series Peltier Concentric Cylinder Cups | Rheology - DHR & AR |
| 533246.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Cup withSlotted Cage | DHR & AR-G2 Building Materials Cell | Rheology - DHR & AR |
| 533247.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Paddle | DHR & AR-G2 Building Materials Cell | Rheology - DHR & AR |
| 533264.901 | HR x0, DHR & AR-G2, Replacement Stainless Steel Building Materials CellSlotted CageNote: For use with P/N: 533246.901 (Stainless Steel Building Materials Cell Cup with Slotted Cage). | DHR & AR-G2 Building Materials Cell | Rheology - DHR & AR |
| 546018.901 | HR x0, DHR & AR-G2 Stainless Steel Helical Rotor | DHR & AR-G2 and AR Helical Tools | Rheology - DHR & AR |
| 546093.001 | Helical Cup, HA Aluminum (diameter = 34 mm, height = 50 mm) | DHR & AR-G2 and AR Helical Tools | Rheology - DHR & AR |
| 404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. | Circulators (Computer Controlled) | Rheology - DHR & AR |
| 202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60Hz for use with Upper Peltier PlateNote: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). | Circulators (Computer Controlled) | Rheology - DHR & AR |
| 202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz for use with Upper Peltier Plate Note: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). | Circulators (Computer Controlled) | Rheology - DHR & AR |
| 534051.901 | DHR, Upper Peltier Plate System | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534570.901 | DHR Upper Peltier Plate Dry Asphalt Kit | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534580.901 | HR x0 Upper Peltier Plate Disposable Plate Kit | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534052.901 | UPP Solvent Reservoir for Standard Peltier Plate | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534053.901 | UPP Solvent Reservoir for Advanced Peltier Plate | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534660.901 | UPP Flowmeter | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60 Hz | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534054.901 | UPP Low Temperature Accessory KitNote: Includes fittings, specially formulated HR-30 pottasium formate low temperature circulation fluid and insulation for tubing. | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 203305.001 | HC-30 UPP Low Temperature Circulation Fluid (pkg. of 1) | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534538.001 | 6 mm Sample Trimming Too | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534539.001 | 3 mm Sample Trimming Tool | UPP Upper Peltier Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 534515.901 | DHR, Stainless Steel, 8 mm, Upper Peltier UTS Plate | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 534519.901 | DHR, Stainless Steel, 20 mm, Upper Peltier UTS Plate | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 534516.901 | DHR, Stainless Steel, 25 mm, Upper Peltier UTS Plate | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 534517.901 | DHR, Stainless Steel, 40 mm, Upper Peltier UTS Plate | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 534518.901 | DHR, Stainless Steel, 40 mm, 2 deg, Upper Peltier UTS Cone | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 534540.901 | DHR Smart Swap 2 UPP Screw-in Upper Geometry with Heat SpreaderNote: Requires Upper Temperature Sensor Draw Rod (P/N: 534585.901) for UPP disposable/screw-in geometry. | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 534525.901 | DHR Smart Swap 2 UPP Disposable Upper Geometry with Heat SpreaderNote: Requires Upper Temperature Sensor Draw Rod (P/N: 534585.901) for UPP disposable/screw-in geometry. | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 534585.901 | HR x0 & DHR, Upper Temperature Sensor Draw Rod for use with the Upper Peltier Plate disposable/screw-in geometries Note: For use with UPP only. Requires UPP Screw-in or Disposable Upper geometry with Heat Spreader. | UPP Upper Peltier Plate Geometries | Rheology - DHR & AR |
| 545803.901 | DHR Upper Heated Plate SystemNote: For use with Peltier Plate. | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 545815.901 | DHR & AR-G2 Upper Heated Plate Smart Swap Geometry Shaft and HeatSpreader | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 545808.901 | HR x0, DHR & AR-Series UHP and Dry Asphalt Low Temperature CoolingOptionNote: This cooling option is required when cooling with fluid circulatorbelow temperatures of 5 °C. Customer must supply fluid circulator. | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 545807.901 | HR x0, DHR & AR-Series UHP and Dry Asphalt Standard Cooling OptionNote: This cooling option is required when cooling with fluid circulatorabove temperatures of 5 °C. Customer must supply fluid circulator. | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 545809.901 | DHR & AR-Series UHP and Dry Asphalt Vortex CoolerNote: Requires Low Temperature Cooling Option (P/N: 545808.901). | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 546201.901 | DHR & AR-G2 Smart Swap UHP/EHP Upper Disposable Plate HolderNote: Not compatible with UTS. | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 545879.901 | HR x0, DHR & AR-G2 UHP Heat Flow Calibration Kit | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 554104.901 | DHR & AR-Series Combined UHP and Peltier ManifoldNote: For use over temperature range of 5 °C to 90 °C.Requires chilling circulator with water circulation fluid controlled at 2 °C. | UHP Upper Heated Plates, EHP Electrically Heated Plates, Geometries, and Accessories | Rheology - DHR & AR |
| 533206.901 | DHR Electrically Heated Plate SystemNote: Max Temperature = 400 °C. Includes 25 mm stainless steel plates. | EHP Electrically Heated Plate Kits | Rheology - DHR & AR |
| 533207.901 | DHR Electrically Heated Disposable Plate SystemNote: Max Temperature = 400 °C. Includes five sets of 25 mm dripchannel disposable plates. | EHP Electrically Heated Plate Kits | Rheology - DHR & AR |
| 546106.901 | DHR & AR-G2 Add-On Disposable Plate Accessory for EHPNote: Includes parts necessary to convert Electrically Heated PlateSystem (P/N: 533206.901), for disposable plate use. Includes five sets of25 mm drip channel disposable plates. | EHP Electrically Heated Plate Kits | Rheology - DHR & AR |
| 546109.901 | EHP Glass Purge CoverNote: Maximum use temperature = 300 °C. | EHP Electrically Heated Plate Kits | Rheology - DHR & AR |
| 546127.901 | HR x0, DHR and AR EHP GCA Kit (cooling down to -70 °C) | EHP Electrically Heated Plate Kits | Rheology - DHR & AR |
| 991600.901 | Gas Cooling AccessoryNote: For HR x0, DMA 850, Q800, DHR, and AR-Series EHP. | EHP Electrically Heated Plate Kits | Rheology - DHR & AR |
| 546202.901 | DHR & AR-G2, Stainless Steel, 8 mm Upper UTS PlateNote 1: For use with P/N: 546240.001 - Stainless Steel, 8 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546220.901 | DHR & AR-G2, Stainless Steel, 20 mm Upper UTS PlateNote 1: For use with P/N: 546261.001 - Stainless Steel, 20 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546203.901 | DHR & AR-G2, Stainless Steel, 25 mm Upper UTS PlateNote 1: For use with P/N: 546241.001 - Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546204.901 | DHR & AR-G2, Stainless Steel, 40 mm Upper UTS PlateNote 1: For use with P/N: 546242.001 - Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546210.901 | DHR & AR-G2, Stainless Steel, 25 mm 0.1 Rad Upper UTS ConeNote 1: For use with P/N: 546241.001 - Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546208.901 | DHR & AR-G2, Stainless Steel, 25 mm 0.04 Rad Upper UTS ConeNote 1: For use with P/N: 546241.001 - Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546206.901 | DHR & AR-G2, Stainless Steel, 25 mm 0.02 Rad Upper UTS ConeNote 1: For use with P/N: 546241.001 - Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546205.901 | DHR & AR-G2, Stainless Steel, 25 mm 1 deg Upper UTS ConeNote 1: For use with P/N: 546241.001 - Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546207.901 | DHR & AR-G2, Stainless Steel, 25 mm 2 deg Upper UTS ConeNote 1: For use with P/N: 546241.001 - Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546209.901 | DHR & AR-G2, Stainless Steel, 25 mm 4 deg Upper UTS ConeNote 1: For use with P/N: 546241.001 - Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546216.901 | DHR & AR-G2, Stainless Steel, 40 mm 0.1 Rad Upper UTS ConeNote 1: For use with P/N: 546242.001 - Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546214.901 | DHR & AR-G2, Stainless Steel, 40 mm 0.04 Rad Upper UTS ConeNote 1: For use with P/N: 546242.001 - Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546212.901 | DHR & AR-G2, Stainless Steel, 40 mm 0.02 Rad Upper UTS ConeNote 1: For use with P/N: 546242.001 - Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546211.901 | DHR & AR-G2, Stainless Steel, 40 mm 1 deg Upper UTS ConeNote 1: For use with P/N: 546242.001 - Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546213.901 | DHR & AR-G2, Stainless Steel, 40 mm 2 deg Upper UTS ConeNote 1: For use with P/N: 546242.001 - Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546215.901 | DHR & AR-G2, Stainless Steel, 40 mm 4 deg Upper UTS ConeNote 1: For use with P/N: 546242.001 - Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546014.901 | HR x0, DHR & AR-G2, Upper Temperature Sensor Draw RodNote 1: For use with UPP, EHP and UHP temperature systems.Requires UTS geometries. UTS drawrod comes standard with UPP, EHP and UHP temperature systems ONLY. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 534585.901 | HR x0 & DHR, Upper Temperature Sensor Draw Rod for use with the Upper Peltier Plate disposable/screw-in geometries Note: For use with UPP only.Requires UPP Screw-in or Disposable Upper geometry with Heat Spreader. | DHR & AR-G2 EHP and UHP Stainless Steel Smart Swap Upper (Upper Temperature Sensor) UTS Geometries | Rheology - DHR & AR |
| 546239.001 | Stainless Steel, 4 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546240.001 | Stainless Steel, 8 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546261.001 | Stainless Steel, 20 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546241.001 | Stainless Steel, 25 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546242.001 | Stainless Steel, 40 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546259.001 | Stainless Steel, 8 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546255.001 | Stainless Steel, 25 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546256.001 | Stainless Steel, 40 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546265.001 | Stainless Steel, 8 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546266.001 | Stainless Steel, 25 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 546267.001 | Stainless Steel, 40 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt | Upper Peltier Plate, Electrically Heated Plate, Upper Heated Plate, and Dry Asphalt System Screw-in Plates | Rheology - DHR & AR |
| 533501.901 | DHR Environmental Test Chamber (ETC)Note: Maximum Temperature = 600 °C. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 533208.901 | HR x0, DHR ETC Oven Camera Viewer Option | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 405001.901 | ACS-2 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 405000.901 | ACS-3 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 405400.901 | HR x0, DHR ETC & DMA 850/ Q800 Combined Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 545056.901 | Combined Air Chiller Panel Upgrade KitNote: For use with DMA 850/Q800 Air Chiller Panel (P/N: 986400.901), to add functionality for use with a HR x0, DHR ETC. | ETC Environmental Test Chambers and Air Chiller Systems | Rheology - DHR & AR |
| 543406.901 | DHR & AR-G2 ETC Parallel Plate Accessory KitNote: Includes 25 mm stainless steel parallel plates.All other geometries purchased separately. | DHR & AR-G2 ETC Kits | Rheology - DHR & AR |
| 543408.901 | DHR & AR-G2 ETC Disposable Parallel Plate Accessory Kit | DHR & AR-G2 ETC Kits | Rheology - DHR & AR |
| 543409.901 | DHR & AR-G2 ETC Pressure Sensitive Adhesives Accessory KitNote: Includes 8 and 25 mm stainless steel parallel plates.All other geometries purchased separately. | DHR & AR-G2 ETC Kits | Rheology - DHR & AR |
| 543410.901 | DHR & AR-G2 ETC Asphalt Parallel Plate Accessory KitNote: Includes 8 and 25 mm stainless steel parallel plates and siliconeasphalt molds. | DHR & AR-G2 ETC Kits | Rheology - DHR & AR |
| 543407.901 | DHR & AR-G2 ETC Torsion Clamp Accessory KitNote: Includes clamps for rectangular solid samples.Maximum Sample Size: Length = 50 mm, Width = 13 mm, Thickness = 5 mm. | DHR & AR-G2 ETC Kits | Rheology - DHR & AR |
| 547905.901 | DHR & AR-G2 ETC Torsion Cylindrical Clamp Accessory KitNote: Includes collets to accommodate rods 1.5, 3, and 4.5 mm indiameter.Maximum Sample Length = 40 mm. | DHR & AR-G2 ETC Kits | Rheology - DHR & AR |
| 543602.901 | DHR & AR-G2, Stainless Steel, 4 mm ETC PlateNote: For use with P/N: 527040.904 - Stainless Steel, 4 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543601.901 | DHR & AR-G2, Stainless Steel, 8 mm ETC PlateNote: For use with P/N: 527080.904 - Stainless Steel, 8 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543606.901 | DHR & AR-G2, Stainless Steel, 25 mm ETC PlateNote: For use with P/N: 527250.904 - Stainless Steel, 25 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543611.901 | DHR & AR-G2, Stainless Steel, 40 mm ETC PlateNote: For use with P/N: 527400.903 - Stainless Steel, 40 mm ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543640.901 | DHR & AR-G2, Stainless Steel, 8 mm Cross Hatched ETC PlateNote: For use with P/N: 527080.906 - Stainless Steel, Cross Hatched, 8 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543641.901 | DHR & AR-G2, Stainless Steel, 25 mm Cross Hatched ETC PlateNote: For use with P/N: 527250.906 - Stainless Steel, Cross Hatched, 25 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543642.901 | DHR & AR-G2, Stainless Steel, 40 mm Cross Hatched ETC PlateNote: For use with P/N: 527400.905 - Stainless Steel, Cross Hatched 40 mm ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543651.901 | DHR & AR-G2, Stainless Steel, 25 mm, 0.1 rad, ETC ConeNote: For use with P/N: 527250.904 - Stainless Steel, 25 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543652.901 | DHR & AR-G2, Stainless Steel, 25 mm, 0.04 rad, ETC ConeNote: For use with P/N: 527250.904 - Stainless Steel, 25 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543661.901 | DHR & AR-G2, Stainless Steel, 25 mm, 2 deg, ETC ConeNote: For use with P/N: 527250.904 - Stainless Steel, 25 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543662.901 | DHR & AR-G2, Stainless Steel, 25 mm, 4 deg, ETC ConeNote: For use with P/N: 527250.904 - Stainless Steel, 25 mm Stepped Lower ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543671.901 | DHR & AR-G2, Stainless Steel, 40 mm, 2 deg, ETC ConeNote: For use with P/N: 527400.903 - Stainless Steel, 40 mm ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543672.901 | DHR & AR-G2, Stainless Steel, 40 mm, 4 deg, ETC ConeNote: For use with P/N: 527400.903 - Stainless Steel, 40 mm ETC Plate. | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 543681.901 | DHR & AR-G2, Stainless Steel, Upper ETC Smart Swap Torsion Geometry | DHR & AR-G2 ETC Stainless Steel Smart Swap Upper Single Piece Geometries | Rheology - DHR & AR |
| 527040.904 | Stainless Steel, 4 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using upper screwed shaft. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527080.904 | Stainless Steel, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using upper screwed shaft. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527250.903 | Stainless Steel, 25 mm Non-Stepped Upper ETC PlateNote: For use with lower screw-in plate - P/N: 527250.904. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527250.904 | Stainless Steel, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use with upper screw-inplate (P/N: 527250.903) and upper screwed shaft. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527400.903 | Stainless Steel, 40 mm ETC Plate, use for upper and lowerNote: For use with single piece upper shaft (P/N: 543331.001), or two requiredif used with upper screwed shaft. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527250.905 | Stainless Steel, Cross Hatched, 25 mm Non-Stepped Upper ETC PlateNote: For use with lower screw-in plate - P/N: 527250.906. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527080.906 | Stainless Steel, Cross Hatched, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper geometry - P/N: 543640.901. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527250.906 | Stainless Steel, Cross Hatched, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use with upper screw-inplate (P/N: 527250.905) if using upper screwed shaft. | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 527400.905 | Stainless Steel, Cross Hatched 40 mm ETC PlateNote: For use with upper and lower - (use with single piece upper shaft/geometries, or use two of this part number if using upper screwed shaft). | Stainless Steel Stepped (lower) and Non-Stepped (upper) Screw-in ETC Plates | Rheology - DHR & AR |
| 526080.904 | HA Aluminum, 8 mm Stepped Lower ETC Plate (2 required) | Hard Anodized Aluminum Stepped (lower) and Non-Stepped (upper) ETC Plates | Rheology - DHR & AR |
| 526250.903 | HA Aluminum, 25 mm Non-Stepped Upper ETC PlateNote: For use with P/N: 526250.904 - HA AL, 25 mm Stepped Lower ETC Plate. | Hard Anodized Aluminum Stepped (lower) and Non-Stepped (upper) ETC Plates | Rheology - DHR & AR |
| 526250.904 | HA Aluminum, 25 mm Stepped Lower ETC PlateNote: For use with P/N: 526250.903 - HA AL, 25 mm Non-Stepped Upper ETC Plate. | Hard Anodized Aluminum Stepped (lower) and Non-Stepped (upper) ETC Plates | Rheology - DHR & AR |
| 526400.903 | HA Aluminum, 40 mm ETC Plate, use for upper and lower (2 required) | Hard Anodized Aluminum Stepped (lower) and Non-Stepped (upper) ETC Plates | Rheology - DHR & AR |
| 543682.901 | DHR & AR-G2, Smart Swap, Upper Disposable Plate Shaft for ETC | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523080.937 | Aluminum, 8 mm Disposable Plates (pkg. of 20) | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523200.917 | Aluminum, 20 mm Disposable Plates (pkg. of 10) | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523250.937 | Aluminum, 25 mm Disposable Plates (pkg. of 20) | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523250.927 | Aluminum, 25 mm Disposable Plates (pkg. of 100) | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523250.938 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note: Required for EHP and UHP upper and lower systems. | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523250.928 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 100) | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523400.937 | Aluminum, 40 mm Disposable Plates (pkg. of 20) | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 523400.927 | Aluminum, 40 mm Disposable Plates (pkg. of 100) | Aluminum Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 527080.937 | Stainless Steel, 8 mm Disposable Plates (pkg. of 20) | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 527250.937 | Stainless Steel, 25 mm Disposable Plates (pkg. of 20) | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 527250.938 | Stainless Steel, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note: Required for EHP and UHP upper and lower systems. | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 527400.937 | Stainless Steel, 40 mm Disposable Plates (pkg. of 20) | Stainless Steel Disposable Plates for ETC/EHP/UHP and Disposable Stepped Peltier | Rheology - DHR & AR |
| 543097.911 | ETC Melt Rings for 25 mm Lower Stepped ETC Plate (pkg. of 50) | ETC/EHP Accessories | Rheology - DHR & AR |
| 578904.001 | Brass Scraper (for cleaning plates) | ETC/EHP Accessories | Rheology - DHR & AR |
| 578905.001 | Brass Brush (for cleaning plates) | ETC/EHP Accessories | Rheology - DHR & AR |
| 543311.901 | HR x0, DHR & AR-Series ETC Flow Meter Kit | ETC Flow Meter and Low Temp Kits for DHR & AR-Series | Rheology - DHR & AR |
| 543313.901 | HR x0, DHR & AR-Series Low Temperature Fittings with LN2 Dewar | ETC Flow Meter and Low Temp Kits for DHR & AR-Series | Rheology - DHR & AR |
| 543312.901 | HR x0, DHR & AR-Series Low Temperature Fittings without LN2 Dewar | ETC Flow Meter and Low Temp Kits for DHR & AR-Series | Rheology - DHR & AR |
| 526253.903 | Aluminum, 25 mm, 0.5 deg Cone for ETC | Aluminum Stepped Upper Cone Geometries for ETC | Rheology - DHR & AR |
| 526256.903 | Aluminum, 25 mm, 2 deg Cone for ETC | Aluminum Stepped Upper Cone Geometries for ETC | Rheology - DHR & AR |
| 526257.903 | Aluminum, 25 mm, 4 deg Cone for ETC | Aluminum Stepped Upper Cone Geometries for ETC | Rheology - DHR & AR |
| 926021.001 | DMA Mode for HR 20, DHR Rheometers | DMA Mode for DHR Rheometers | Rheology - DHR & AR |
| 533890.901 | HR 30, HR 20, DHR 3-Point Bending Clamp Accessory Kit | DMA Mode for DHR Rheometers | Rheology - DHR & AR |
| 533892.901 | HR 30, HR 20, DHR Cantilever Bending Clamp Accessory Kit | DMA Mode for DHR Rheometers | Rheology - DHR & AR |
| 533894.901 | HR 30, HR 20, DHR Film/Fiber Tension Accessory Kit | DMA Mode for DHR Rheometers | Rheology - DHR & AR |
| 545201.901 | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) | DHR Extensional Viscosity Accessory (EVA) | Rheology - DHR & AR |
| 404140.901 | HR x0, DHR Standard Drum Pair Set for EVA | DHR Extensional Viscosity Accessory (EVA) | Rheology - DHR & AR |
| 404140.903 | HR x0, DHR Knurled Surface Drum Pair Set for EVA | DHR Extensional Viscosity Accessory (EVA) | Rheology - DHR & AR |
| 404140.905 | HR x0, DHR Roughened Surface Drum Pair Set for EVA | DHR Extensional Viscosity Accessory (EVA) | Rheology - DHR & AR |
| 403056.901 | HR x0, DHR, ARES-G2 Replacement Clamps for EVA (pkg. of 4) | DHR Extensional Viscosity Accessory (EVA) | Rheology - DHR & AR |
| 547906.901 | SER3 Universal Testing Platform for HR 30, HR 20, DHR & AR | DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - DHR & AR |
| 200974.002 | SER3 and SER2 Standard Drum Pair for HR x0, DHR & AR | DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - DHR & AR |
| 200975.002 | SER3 and SER2 Knurled Surface Drum Pair Set for HR x0, DHR & AR | DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - DHR & AR |
| 200976.002 | SER3 and SER2 Rough Surface Drum Pair Set for HR x0, DHR & AR | DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - DHR & AR |
| 200977.002 | Securing Clamps for HR x0, DHR & AR SER3/2 and ARES-G2 SER3(pkg. of 6) | DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - DHR & AR |
| 200978.001 | SER3 and SER2 Dual Blade Cutter Assembly | DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - DHR & AR |
| 200979.001 | Razor Blades for SER3 and SER2 Dual Blade Cutter Assembly (pkg. of 50) | DHR & AR-Series SER3 and SER2 Universal Testing Platform | Rheology - DHR & AR |
| 547200.901 | HR 30, HR 20, DHR-RH Accessory for Discovery Hybrid Rheometer | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547207.901 | HR x0, DHR-RH Parallel Plate Accessory Kit | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547210.901 | HR x0, DHR-RH Annular Ring Accessory | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547211.901 | HR x0, DHR-RH Surface Diffusion Accessory | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547208.901 | HR x0, DHR-RH Film/Fiber Tension Accessory Kit | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547278.901 | HR x0, DHR-RH 3-Point Bending Accessory Kit | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547282.901 | HR x0, DHR-RH Cantilever Bending Clamp Kit | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547279.901 | HR x0, DHR-RH Rectangular Torsion Clamp Accessory Kit | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547280.901 | HR x0, DHR-RH Tribo-rheometry, Ring Upper Geometry | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 547281.901 | HR x0, DHR-RH Tribo-rheometry Accessory Base Kit | DHR Relative Humidity (RH) Accessories | Rheology - DHR & AR |
| 546800.901 | HR x0, DHR Optics Plate Accessory (OPA) | DHR Optics Plate Accessory | Rheology - DHR & AR |
| 546800.902 | Optics Plate Accessory with Camera | DHR Optics Plate Accessory | Rheology - DHR & AR |
| 546801.901 | Optics Plate Accessory Replacement Glass Plates and O-rings | DHR Optics Plate Accessory | Rheology - DHR & AR |
| 546802.901 | DHR & AR-G2, Stainless Steel, 40 mm Parallel Plate, Mirror Finish | DHR Optics Plate Accessory | Rheology - DHR & AR |
| 546803.901 | DHR & AR-G2, Stainless Steel, 40 mm Upper UTS Plate, Mirror Finish | DHR Optics Plate Accessory | Rheology - DHR & AR |
| 546810.901 | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 546800.901 | HR x0, DHR Optics Plate Accessory (OPA) | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 546814.901 | HR x0, DHR Counter-Rotating Optics Plate Accessory | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 546812.901 | HR x0, DHR Optics Plate Thin Cover Glass Kit | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 546809.901 | Modular Microscope Accessory Replacement Thin Glass Cover | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 546815.901 | HR x0, DHR MMA Piezo Scanner 100 μm | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 203274.001 | HR x0, DHR MMA Fluorescence Splitter | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 203273.001 | HR x0, DHR MMA Objective 20X Long Working Distance | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 203183.001 | HR x0, DHR MMA Objective 40X Long Working Distance | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 203135.001 | HR x0, DHR MMA Objective 20X Short Working Distance | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 203170.001 | HR x0, DHR MMA Objective 50X Short Working Distance, Oil | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 203171.001 | HR x0, DHR MMA Objective 100X Short Working Distance, Oil | DHR Modular Microscope Accessory (MMA) | Rheology - DHR & AR |
| 547100.901 | DHR Magneto-Rheology Accessory | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 547106.901 | HR x0, DHR Magneto-Rheology Closed Loop Field Kit | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 547107.901 | HR x0, DHR Magneto-Rheology Extended Temperature Kit | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 547110.901 | DHR Magneto-Rheology Parallel Plate, 20 mm, Stainless Steel | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 547111.901 | DHR Magneto-Rheology Cone, 20 mm, 2 deg, Stainless Steel | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 547112.901 | HR x0, DHR Magneto-Rheology Lower Plate | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 203347.001 | Julabo Fluid Circulator, Wide Range (115VAC/60 Hz) | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 203348.001 | Julabo Fluid Circulator, Wide Range (230VAC/50 Hz) | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 595010.901 | Julabo Fittings Kit | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 203349.001 | Thermal C5 Low Temperature Circulator Fluid (-35 °C to 110 °C) | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 203350.001 | Thermal C20S High Temperature Circulator Fluid (0 °C to 200 °C) | DHR Magneto-Rheology Accessory | Rheology - DHR & AR |
| 546701.901 | HR 30, HR 20, DHR Electro-Rheology Accessory (110VAC)Note: Requires Electro-rheology shield kit (P/N: 534060.901) for HR x0 and(P/N: 533604.901) for DHR. | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 546701.902 | HR 30, HR 20, DHR Electro-Rheology Accessory (220VAC)Note: Requires Electro-rheology shield kit (P/N: 534060.901) for HR x0 and(P/N: 533604.901) for DHR. | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 533604.901 | DHR Electro-Rheology Shield and Safety Interlock Kit | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 546761.901 | DHR Electro-Rheology, Parallel Plate, 25 mm | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 546705.901 | DHR Electro-Rheology, Parallel Plate, 40 mm | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 546762.901 | DHR Electro-Rheology, 25 mm DIN Rotor | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 545630.902 | HR x0, DHR Electro-Rheology, Stainless Steel Concentric Cylinders Cup,30 mm diameter | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 595006.901 | DHR Electro-Rheology Dress Cover Grounding Retrofit Kit | DHR Electro-Rheology Accessory | Rheology - DHR & AR |
| 547920.901 | HR x0, DHR & AR-G2 Immobilization Cell Accessory | DHR & AR-G2 Immobilization Cell Accessory | Rheology - DHR & AR |
| 547962.001 | Replacement Sieve for Immobilization Cell | DHR & AR-G2 Immobilization Cell Accessory | Rheology - DHR & AR |
| 533242.901 | Tribo-Rheometry Accessory Base Kit | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533279.901 | HR x0, DHR & AR-G2, Tribo-Rheometry Coupling Adapter, Short | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533279.902 | HR x0, DHR & AR-G2, Tribo-Rheometry Coupling Adapter, Long | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533273.902 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Short | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533273.901 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Medium | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533273.903 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Long | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533283.901 | Tribo-Rheometry, Ring on Plate Upper Geometry Holder | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533290.901 | Tribo-Rheometry, 3 Balls on Plate Upper Geometry Holder | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533249.901 | Tribo-Rheometry, 5/16” Truncated SST Balls (pkg. of 12) | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533250.901 | Tribo-Rheometry, 1/2” SST Balls (pkg. of 25) | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533284.901 | Tribo-Rheometry, Ring Upper Geometry (pkg. of 3) | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533274.901 | Tribo-Rheometry, Ball on 3 Balls Lower Geometry | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533281.901 | Tribo-Rheometry, SST Cup 45 mm Lower Geometry (pkg. of 2) | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533282.901 | Tribo-Rheometry, 3 Plates Lower Geometry | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533291.901 | Tribo-Rheometry, Ball on 3 Plates SST Test Plates (pkg. of 30) | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 523400.907 | Aluminum, 40 mm Disposable Plate | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533300.901 | HR x0, DHR & AR-G2, ETC, Tribo-Rheometry Lower Geometry Holder | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 531336.901 | DHR & AR-G2 to AR2000ex Tribo-Rheometry Geometry Adapter Sleeve | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 532080.901 | HR x0, DHR, ARES-G2, APS, Tribo-Rheometry Lower Geometry Holder | DHR & AR-G2 Tribo-Rheometry Accessory | Rheology - DHR & AR |
| 533613.901 | HR 30, HR 20, DHR Rheo-Raman AccessoryNote: Requires iXR Raman Spectrometer, sold separately.Also requires the following:1. Upper Heated Plate (P/N: 545803.901) for DHRor (P/N: 534063.901) for HR x02. Appropriate UTS-compatible upper geometry,Rheo-Raman microscope objective (P/N: 271904.001),and Rheo-Raman optical table (P/N: 271920.001) for DHRor (272004.001) for HR x0.Requires service engineer installation quoted separately. | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - DHR & AR |
| 271920.001 | DHR Rheo-Raman Optical Table | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - DHR & AR |
| 272004.001 | HR x0, DHR Rheo-Raman Optical Table | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - DHR & AR |
| 271904.001 | HR x0, DHR Rheo-Raman Objective 20X Long Working Distance | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - DHR & AR |
| 533611.901 | Rheo-Raman Accessory Replacement Glass Plates and O-rings | HR 30, HR 20, DHR Rheo-Raman Accessory | Rheology - DHR & AR |
| 546601.901 | HR 30, HR 20, DHR Dielectric AccessoryNote: Requires appropriate geometries and customer-supplied LCR meter. | DHR Dielectric Accessory | Rheology - DHR & AR |
| 546602.901 | HR x0, DHR 25 mm Upper Dielectric GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | DHR Dielectric Accessory | Rheology - DHR & AR |
| 546603.901 | HR x0, DHR 25 mm Lower Dielectric GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | DHR Dielectric Accessory | Rheology - DHR & AR |
| 546610.901 | HR x0, DHR Upper Dielectric Disposable GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | DHR Dielectric Accessory | Rheology - DHR & AR |
| 546615.901 | HR x0, DHR Lower Dielectric Disposable GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). | DHR Dielectric Accessory | Rheology - DHR & AR |
| 613.04946 | Keysight E4980A LCR MeterNote: For HR x0, DHR and ARES-G2, RSA-G2 DETA: frequency range: 20Hz. to 2MHz.; AC test signal (potential) 0.005 to 20 Volts (115/230VAC; 50/60Hz). | DHR Dielectric Accessory | Rheology - DHR & AR |
| 203330.001 | Keysight E4980AL-102 LCR MeterNote: For HR x0, DHR and ARES-G2, RSA-G2 DETA: frequency range: 20Hz to 1MHz; AC test signal (potential) 0.001 to 2 Volts (115/230VAC; 50/60Hz). | DHR Dielectric Accessory | Rheology - DHR & AR |
| 534855.901 | HRx0, DHR Rheo-Impedance Spectroscopy Accessory parallel plateNote: Requires Advanced Peltier Plate (P/N 533209.901) and LCR Meter. | Rheo-Impedance Spectroscopy Accessory | Rheology - DHR & AR |
| 206442.001 | Hioki LCR Meter IM3536Note: For use with Rheo-Impedance Spectroscopy Accessory (534855.901), or Dielectric Accessory (546601.901). | Rheo-Impedance Spectroscopy Accessory | Rheology - DHR & AR |
| 545618.901 | HR x0, DHR & AR-Series Smart Swap Torsion Immersion KitNote: Requires Peltier Fluid Jacket - P/N: 533201.901. | DHR & AR-Series Torsion Immersion | Rheology - DHR & AR |
| 547004.901 | HR x0, DHR & AR-Series Generic Container HolderNote: Suitable for containers with OD in the range of 30 mm to 80 mm. | DHR & AR-Series Generic Container Holder | Rheology - DHR & AR |
| 531056.901 | HR x0, DHR & AR-Series Blank Smart Swap Base | DHR & AR-Series Blank Smart Swap Base | Rheology - DHR & AR |
| 533216.901 | HR x0, DHR Pressure Cell High TempNote: Requires Smart Swap Peltier Concentric Cylinder Jacket (P/N:533201.901) or Smart Swap Electrically Heated Concentric Cylinder (P/N:547310.901). | DHR Pressure Cell | Rheology - DHR & AR |
| 402828.901 | Starch RotorNote: For HR x0, DHR Pressure Cell - P/N: 533216.901. | DHR Pressure Cell | Rheology - DHR & AR |
| 402815.901 | Vane RotorNote: For HR x0, DHR Pressure Cell - P/N: 533216.901. | DHR Pressure Cell | Rheology - DHR & AR |
| 547050.901 | HR x0, DHR High Sensitivity Pressure CellNote: Requires the Concentric Cylinder Peltier Jacket - P/N 533201.901. | DHR High Sensitivity Pressure Cell | Rheology - DHR & AR |
| 402817.901 | Vane rotor for HR x0, DHR & ARES-G2 High Sensitivity Pressure Cell (HSPC)Note: Requires HR x0, DHR or ARES-G2 High Sensitivity Pressure Cell -HR x0, DHR (P/N: 547050.901) or ARES-G2 (P/N: 402818.901). | DHR High Sensitivity Pressure Cell | Rheology - DHR & AR |
| 547052.901 | Starch rotor for HR x0, DHR High Sensitivity Pressure Cell (HSPC)Note: Requires HR x0, DHR High Sensitivity Pressure Cell - P/N: 547050.901. | DHR High Sensitivity Pressure Cell | Rheology - DHR & AR |
| 545702.901 | DHR & AR-G2, Starch Pasting Cell | DHR & AR-Series Smart Swap Starch Pasting Cell and Replacement Parts | Rheology - DHR & AR |
| 545712.901 | DHR & AR-G2, Replacement Rotor for Starch Pasting Cell | DHR & AR-Series Smart Swap Starch Pasting Cell and Replacement Parts | Rheology - DHR & AR |
| 545713.901 | DHR & AR-G2, HA Aluminum Conical Rotor For Starch Pasting Cell | DHR & AR-Series Smart Swap Starch Pasting Cell and Replacement Parts | Rheology - DHR & AR |
| 545723.001 | Replacement Cup for Starch Pasting Cell | DHR & AR-Series Smart Swap Starch Pasting Cell and Replacement Parts | Rheology - DHR & AR |
| 546301.901 | HR x0, DHR-3, DHR-2 & AR-Series, UV Light Guide Accessory withoutUV Light Source | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 546303.901 | HR x0, DHR-3, DHR-2 & AR-Series, UV Light Guide Accessory with UV LightSource | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 533217.901 | HR x0, DHR-3 & DHR-2, 365 nm LED UV-Curing Accessory | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 533218.901 | HR x0, DHR-3 & DHR-2, 455 nm LED Blue Light Curing Accessory | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 546384.901 | UV-Curing Accessory Plate Rubber Ring Plate Guards | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 546320.901 | DHR-3, DHR-2 & AR-G2, Stainless Steel, Smart Swap Disposable Plate Shaftfor UV Accessories | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 403153.001 | 20 mm Quartz Plate for HR x0/DHR/AR and ARES UV-Curing OptionNote: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/DHR/AR-UV option. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 403064.901 | 20 mm diameter Disposable Acrylic Plates (pkg. of 10)Note: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/HR/AR-UV option. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 200400.001 | Replacement 5 mm diameter light guideNote: For HR x0/DHR/AR and ARES UV-Curing and Photo-Curing Options. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 935014.901 | PCA/UV External Filter Adapter Accessory KitNote: Allows use of external filters with the PCA (P/N: 935000.901). | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 935009.001 | Filter, External, 320 - 480 nmNote: For the Omnicure S-2000 with external filter adapter. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 935009.002 | Filter, External, 320 - 390 nmNote: For the Omnicure S-2000 with external filter adapter. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 935009.004 | Filter, External, 400 - 500 nmNote: For the Omnicure S-2000 with external filter adapter. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 935009.003 | Filter, External, 365 nmNote: For the Omnicure S-2000 with external filter adapter. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 546316.901 | Replacement RadiometerNote: For UV Light Guide Accessory. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 546317.901 | Replacement RadiometerNote: For UV LED Accessory. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 534590.901 | HR x0, DHR UPP CoverNote: For UV Curing Accessories. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 533405.901 | HR x0, DHR UHP CoverNote: For UV Curing Accessories. | DHR & AR UV-Curing Option | Rheology - DHR & AR |
| 545907.901 | DHR-3, DHR-2 Double Wall Ring Interfacial (DWR) Rheology System - For Standard Peltier PlateNote 1: Includes DWR Pt/Ir Ring Geometry and Delrin Trough. Note 2: Option requires standard Peltier Plate (P/N: 533210.901). | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545910.901 | DHR-3, DHR-2 Double Wall Ring Interfacial (DWR) Rheology System - For Advanced Peltier PlateNote 1: Includes DWR Pt/Ir Ring Geometry and Delrin Trough. Note 2: Option requires Advanced Peltier Plate (P/N: 533209.901). | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545909.901 | DHR-3, DHR-2 Double Wall Du Nouy Ring (DDR) Interfacial Rheology SystemNote: Option requires standard Peltier Plate (P/N: 533210.901). | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 533601.901 | HR x0, DHR Double Wall Ring (DWR) Interfacial Exchange Cell | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 271902.001 | HR x0, DHR Double Wall Ring (DWR) Interfacial Exchange Cell Syringe Pump | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 533624.901 | Interfacial Exchange Cell Replacement Tubing and Syringes | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545911.901 | DHR & AR-G2 Interfacial Geometry Holder | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545950.001 | HR x0, DHR & AR-G2, Double Wall Ring, Platinum-IrNote: Replacement ring - does NOT include geometry holder. | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 530021.001 | HR x0, DHR & AR-G2, PT-IR Du Nouy Ring Geometry for Dynamic InterfacialSystemNote: Replacement ring - does NOT include geometry holder. | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545908.901 | HR x0, DHR-3, DHR-2 & AR-G2, Double Wall Ring Window Kit | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545903.901 | DHR & AR-G2, Smart Swap Interfacial Bicone Accessory | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545922.001 | HR x0, DHR, AR-G2 and AR 2000, 45 mm Diameter Teflon InterfacialBicone Cup | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 545934.001 | DHR & AR-G2 Smart Swap Interfacial Bicone Geometry | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 578155.001 | Sample - Vessel 70 mm diameter (glass-cup) | DHR & AR-Series Smart Swap Interfacial Rheology Systems and Accessories | Rheology - DHR & AR |
| 533222.901 | HR 30, HR 20, DHR-3, DHR-2 SALS Accessory | DHR & HR x0 SALS Accessory | Rheology - DHR & AR |
| 546417.901 | DHR-3, DHR-2 & AR-G2 Quartz 50 mm Plate | DHR & HR x0 SALS Accessory | Rheology - DHR & AR |
| 546484.001 | SALS Polystyrene Alignment Material | DHR & HR x0 SALS Accessory | Rheology - DHR & AR |
| 546483.001 | SALS Neutral Density Filter Kit | DHR & HR x0 SALS Accessory | Rheology - DHR & AR |
| 554103.901 | HR x0, DHR & AR-Series Smart Swap Asphalt Submersion Cell | DHR & AR-Series Smart Swap Asphalt Submersion Cell | Rheology - DHR & AR |
| 250000.001 | Filter/Regulator | Air Supply Accessories | Rheology - DHR & AR |
| 500030.901 | Membrane Compressed Air Dryer | Air Supply Accessories | Rheology - DHR & AR |
| 575016.901 | HR x0, DHR, and AR-Series Oil-Free Compressor (240VAC/50Hz) | Air Supply Accessories | Rheology - DHR & AR |
| 533235.901 | DHR Manifold Mounting Adapter | DHR Manifold Mounting Adapter | Rheology - DHR & AR |
| 543033.001 | Asphalt Cylindrical Torsion End Pieces | DHR & AR-Series Asphalt Accessories - Cylindrical Torsion | Rheology - DHR & AR |
| 554024.901 | HR x0, DHR & AR-Series Automated Asphalt Temperature Calibration KitNote: Requires PC with USB port and TRIOS or Rheology AdvantageSoftware Version 5.7. or later. | Automated Temperature Calibration | Rheology - DHR & AR |
| 554003.901 | Asphalt Submersion Cell Replacement Filter Material, 1 Package | DHR & AR Asphalt Submersion Cell | Rheology - DHR & AR |
| 554004.901 | Replacement Asphalt Submersion Cell Plate Removal Tool | DHR & AR Asphalt Submersion Cell | Rheology - DHR & AR |
| 554007.901 | Asphalt Sample Molds, 1 Pair | DHR & AR Asphalt Submersion Cell | Rheology - DHR & AR |
| 554001.901 | Stainless Steel, 8 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - DHR & AR |
| 554008.901 | Stainless Steel, 12 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - DHR & AR |
| 554002.901 | Stainless Steel, 25 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - DHR & AR |
| 554019.902 | HA Aluminum, 8 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - DHR & AR |
| 554020.902 | HA Aluminum, 25 mm Screw-in Parallel Plates for Asphalt Submersion Cell | Asphalt Submersion Cell Parallel Plates | Rheology - DHR & AR |
| 952377.901 | Fungicide for Peltier Reservoir | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - DHR & AR |
| 532067.901 | HR x0, DHR & AR-Rheometer Vibration Isolation Pads | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - DHR & AR |
| 203854.901 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 1) | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - DHR & AR |
| 203854.902 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 4) | Peltier, UHP, Dry Asphalt System Replacement Parts | Rheology - DHR & AR |
| 545852.001 | 3 mm UHP Plate Trimming ToolNote: For use with Standard Peltier Plate. | Stainless Steel Sample Trimming Tools | Rheology - DHR & AR |
| 545851.001 | 6 mm UHP Dry Asphalt System Trimming ToolNote: For use with Stepped Peltier. | Stainless Steel Sample Trimming Tools | Rheology - DHR & AR |
| 250024.001 | Low Viscosity Standard Oil (S60) ~ 100 mPa.s (cP) @ 25 °C | Standard Oils | Rheology - DHR & AR |
| 250024.002 | High Viscosity Standard Oil (S600) ~ 1100 mPa.s (cP) @ 25 °C | Standard Oils | Rheology - DHR & AR |
| 201261.001 | DSR Standard N2700000SP Standard Oil | Standard Oils | Rheology - DHR & AR |
| 575105.901 | A Handbook of Elementary Rheology, Howard A. Barnes | Rheology Text Books | Rheology - DHR & AR |
| 575103.901 | Introduction to Rheology, H.A. Barnes, J.F. Hutton and K. Walters | Rheology Text Books | Rheology - DHR & AR |
| 926018.001 | LAOS and FT RHEOLOGY for TRIOSNote: Large Amplitude Oscillatory Shear and Fourier Transform Rheology Software for TRIOS. | ARES-G2 Software | Rheology - ARES |
| 926019.001 | Rheology Polymer Library for TRIOSNote: Includes software for Molecular Weight Distribution Calculations. | ARES-G2 Software | Rheology - ARES |
| 251471.002 | DSL Router with 4-Port SwitchNote: For communication between an external controller and Thermal and Rheology instruments. | ARES-G2 Software | Rheology - ARES |
| 203599.901 | Universal AC adapter kit for DSL Router | ARES-G2 Software | Rheology - ARES |
| 401892.901 | ARES-G2 and RSA-G2 Forced Convection Oven (FCO) | FCO Temperature Control System and Options | Rheology - ARES |
| 401041.901 | ARES-G2, RSA-G2 and DMA 3200 FCO LN2 Controller Option | FCO Temperature Control System and Options | Rheology - ARES |
| 401798.901 | ARES/RSA3 to ARES-G2/RSA-G2 LN2 Upgrade Kit | FCO Temperature Control System and Options | Rheology - ARES |
| 401711.901 | ARES-G2 and RSA-G2 FCO Camera | FCO Temperature Control System and Options | Rheology - ARES |
| 401070.901 | Heat Shield for ARES-G2 Forced Convection Oven | FCO Temperature Control System and Options | Rheology - ARES |
| 405001.901 | ACS-2 Air Chiller System (240VAC/60Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation. | FCO Temperature Control System and Options | Rheology - ARES |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC/50Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation. | FCO Temperature Control System and Options | Rheology - ARES |
| 405000.901 | ACS-3 Air Chiller System (240VAC/60Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation. | FCO Temperature Control System and Options | Rheology - ARES |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC/50Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation. | FCO Temperature Control System and Options | Rheology - ARES |
| 404041.901 | ARES-G2, RSA-G2 & DMA 3200 FCO Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. | FCO Temperature Control System and Options | Rheology - ARES |
| 402319.901 | ARES FCO Melt Rheology Geometry BundleThis bundle includes the following:- Torsion Rectangular Fixture (P/N: 403220.901) Stainless Steel;- 25 mm parallel plates (two of P/N: 401981.901) Stainless Steel;- 25 mm 0.1 rad Cone (P/N: 402317.901)Note: Compatible with ARES Classic Instruments. | FCO Geometry Bundles and Sample Preparation Kit | Rheology - ARES |
| 401035.901 | ARES FCO Advanced Melt Rheology Add-On Geometry Bundle(Designed for use with Melt Rheology Geometry Bundle) includes:- Stainless Steel 50 mm Parallel Plates (two of P/N: 401968.901);- Stainless Steel 25 mm Serrated Plates (two of P/N: 401.00512.1);- Stainless Steel 50 mm 0.04 rad Cone (P/N: 401963.901)Note: Compatible with ARES Classic Instruments. | FCO Geometry Bundles and Sample Preparation Kit | Rheology - ARES |
| 402323.901 | ARES FCO Thermoset Testing Geometry BundleThis bundle includes the following:- Torsion Rectangular Fixture (P/N: 403220.901);- Disposable Plate Fixture (two of P/N: 402303.901);- One Pair 8 mm Aluminum Disposable Plates;- One Pair 25 mm Aluminum Disposable PlatesNote: Compatible with ARES Classic Instruments. | FCO Geometry Bundles and Sample Preparation Kit | Rheology - ARES |
| 402331.901 | ARES-G2 Melt Sample Preparation Kit; includes:This kit includes the following:- 8 mm, 25 mm punch and die set (to 3 mm thick);- Aluminum scraping tool for trimming sample;- Brass brush for cleaning plates;- Precision knife for sample trimming;- Polymer Pellet Melt Ring for 25 mm diameter, Upper Cones and PlatesNote: Compatible with ARES Classic Instruments. | FCO Geometry Bundles and Sample Preparation Kit | Rheology - ARES |
| 403220.901 | ARES-G2 Torsion Rectangular Clamp Set | FCO Torsion Rectangular and Torsion Cylindrical Geometries | Rheology - ARES |
| 402560.901 | ARES-G2 Torsion Cylindrical Clamp SetNote: Sample holder diameters: 1.5, 3, and 4.5 mm. | FCO Torsion Rectangular and Torsion Cylindrical Geometries | Rheology - ARES |
| 403220.902 | ARES Classic Torsion Rectangular Clamp Set (Ver 1 through 8) | FCO Torsion Rectangular and Torsion Cylindrical Geometries | Rheology - ARES |
| 403165.901 | ARES EVF, Extensional Viscosity FixtureNote: ARES Classic requires 2KFRT transducer. | FCO Specialty Fixtures | Rheology - ARES |
| 403074.901 | ARES EVF, Replacement Drum Pins, One Set | FCO Specialty Fixtures | Rheology - ARES |
| 403076.901 | ARES EVF, Sample Mold and Plates | FCO Specialty Fixtures | Rheology - ARES |
| 708.01440 | ARES Linear Tack Testing Tool | FCO Specialty Fixtures | Rheology - ARES |
| 402333.901 | ARES Recessed End Ambient CouetteThis includes the following:- 25 mm diameter Titanium Bob;- 27 mm diameter Stainless Steel Cup and PRTNote: For ARES-G2 and ARES Classic Rheometers. | FCO Specialty Fixtures | Rheology - ARES |
| 402800.901 | ARES-G2, Cone Partitioned Plate Geometry for FCO | FCO Specialty Fixtures | Rheology - ARES |
| 401014.901 | ARES-G2 Smart Swap Peltier PlateNote: Requires Environmental Control Box (P/N: 401949.901) andappropriate Peltier Circulator. | ARES-G2 Peltier Plate Temperature Control Options | Rheology - ARES |
| 401949.901 | ARES-G2 Environmental Control BoxNote: Required for Peltier Plate Temperature Control. | ARES-G2 Peltier Plate Temperature Control Options | Rheology - ARES |
| 402280.901 | ARES Peltier Plate Solvent Trap AccessoryNote 1: Requires use of solvent trap geometries.Note 2: For use with ARES Classic and ARES-G2 Smart Swap Peltier Plates ONLY. | ARES Solvent Trap Accessory and Solvent Trap Geometries | Rheology - ARES |
| 403209.901 | Air Cooled Peltier Circulator (110/220VAC; 50/60Hz)Note: For DHR & AR and ARES Rheometers. | ARES Peltier Circulators for Peltier Systems (Peltier Plate and APS) | Rheology - ARES |
| 404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) withfittings for rheometersNote: For use with ARES-G2 Peltier Plate and Peltier Concentric CylinderSystems. | ARES Peltier Circulators for Peltier Systems (Peltier Plate and APS) | Rheology - ARES |
| 402328.901 | ARES, Sealed Bath Fluid Rheology Geometry BundleNote: For ARES-G2 and ARES Classic Rheometers.This bundle includes:- 50 mm Titanium Upper Plate and Stainless Lower Parallel Plate;- Titanium Upper 50 mm 0.04 rad Cone;- Recessed End Couette with 34 mm diameter Cup; - 32 mm diameter Bob | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 402330.901 | ARES, Sealed Bath Advanced Fluids Rheology Geometry BundleNote: For ARES-G2 and ARES Classic Rheometers.This bundle includes:- 25 mm diameter Titanium Upper Plate and Stainless Lower Parallel Plate;- Titanium 25 mm diameter 0.04 rad Cone;- Small volume recessed end Couette with 17 mm diameter Stainless Steel Cup;- 16.5 mm diameter Titanium Bob | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 401995.901 | ARES, Sealed Bath Recessed End CouetteNote: Includes the following:- 32 mm diameter Titanium Bob with Recessed End;- 34 mm diameter Stainless Steel Cup | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 401996.901 | ARES, Sealed Bath Small Volume Recessed End CouetteNote: Includes the following:- 16.5 mm diameter Titanium Bob; - 17 mm diameter Stainless Steel Cup | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 401997.901 | ARES, Sealed Bath Double Wall CouetteNote: Includes the following:- 34 mm OD/27.95 mm ID Stainless Steel Cup;- 32 mm OD/29.5 mm ID Titanium Bob | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 708.01228 | ARES, Stainless Steel 18 mm Vaned BobNote: For use with Sealed Bath configured with lower 34 mm Stainless Steel Cup. | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 700.03464 | ARES, Stainless Steel Double Wall Cup for Sealed Bath | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 708.01471 | ARES, Stainless Steel, 25 mm Lower Plate for Sealed Bath | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 708.01472 | ARES, Stainless Steel, 50 mm Lower Plate for Sealed Bath | ARES-G2 Sealed Bath Geometry Bundles and Couettes | Rheology - ARES |
| 402500.901 | ARES-G2, APS, Jacket | ARES-G2 Advanced Peltier System (APS) | Rheology - ARES |
| 402620.901 | ARES-G2, APS, Hard Anodized Aluminum, 30 mm Dia., Cup | APS Cups | Rheology - ARES |
| 402741.901 | ARES-G2, APS, Stainless Steel, 30 mm Dia., Cup (with embedded PRT) | APS Cups | Rheology - ARES |
| 402641.901 | ARES-G2, APS, Hard Anodized Aluminum, 34 mm Dia., Cup | APS Cups | Rheology - ARES |
| 402684.901 | ARES-G2, APS, Hard Anodized Aluminum, 34 mm Dia., Double Gap Cup | APS Cups | Rheology - ARES |
| 402684.902 | ARES-G2, APS, Stainless Steel, 34 mm Dia., Double Gap Cup | APS Cups | Rheology - ARES |
| 402678.901 | ARES-G2, APS, Hard Anodized Aluminum, 20 mm Dia., Cup | APS Cups | Rheology - ARES |
| 402681.901 | DHR, ARES-G2, APS, Hard Anodized Aluminum, 42 mm Dia.,15 mm Edge Height, Immersion CupNote: Includes the following:Two removable sidewalls (one aluminum and one clear polycarbonate) for easy sample loading and trimming. | APS Cups | Rheology - ARES |
| 402621.901 | ARES-G2, APS, Stainless Steel, 27.7 mm Dia., DIN Bob | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402673.901 | ARES-G2, APS, Stainless Steel, 27.7 mm Dia., 41.5 mm Height, Recessed End Bob | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402675.901 | ARES-G2, APS, Stainless Steel, 27.7 mm Dia., 41.5 mm Height, Vane Bob | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402682.901 | ARES-G2, APS, Stainless Steel, 15 mm Dia., 38 mm Height, Wide Gap VaneBob | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402679.901 | ARES-G2, APS, Stainless Steel, 18.6 mm Dia., 27.9 mm Height, Conical EndDIN Bob | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402680.901 | ARES-G2, APS, Stainless Steel, 18.6 mm Dia., 27.9 mm Height,Recessed End Bob | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402674.901 | ARES-G2, APS, Titanium, 31.4 mm Dia., 47.1 mm Height, Recessed EndBob | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402676.901 | ARES-G2, APS, Titanium, Double Gap Bob:Inner Dia. = 29.4 mm, Outer Dia. = 32 mm, Height = 48 mm,Sample Volume = 9.4 mL | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402676.902 | ARES-G2, APS, Titanium, Narrow Gap Double Gap Bob:Inner Dia. = 28.6 mm, Outer Dia. = 33 mm, Height = 49.5 mm,Sample Volume = 5.0 mL | APS Bobs (for use with APS Cups) | Rheology - ARES |
| 402619.901 | ARES-G2, APS, Standard Flat Plate | APS Standard Flat Plate | Rheology - ARES |
| 402625.901 | DHR, ARES-G2, APS, Stainless Steel, 8 mm, Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402624.901 | DHR, ARES-G2, APS, Stainless Steel, 25 mm, Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402623.901 | DHR, ARES-G2, APS, Stainless Steel, 40 mm, Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402622.901 | DHR, ARES-G2, APS, Stainless Steel, 50 mm, Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402627.901 | DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 8 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402628.901 | DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 25 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402629.901 | DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 40 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402630.901 | DHR, ARES-G2, APS, Hard Anodized Aluminum, 25 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402631.901 | DHR, ARES-G2, APS, Hard Anodized Aluminum, 40 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402632.901 | DHR, ARES-G2, APS, Hard Anodized Aluminum, 50 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402633.901 | DHR, ARES-G2, APS, Titanium, 25 mm, Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402634.901 | DHR, ARES-G2, APS, Titanium, 50 mm, Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402811.901 | DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 8 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402770.901 | DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 25 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402769.901 | DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 40 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402768.901 | ARES-G2, APS, Stainless Steel, Sandblasted, 50 mm,Quick Change Plate | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402751.902 | DHR, ARES-G2, APS, Quick Change Plate Holder | APS Quick Change Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402611.901 | DHR, ARES-G2, APS, Aluminum, 8 mm, Quick Change Disposable Plate(pkg. of 20) | APS Quick Change Disposable Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402612.901 | DHR, ARES-G2, APS, Aluminum, 20 mm, Quick Change Disposable Plate(pkg. of 20) | APS Quick Change Disposable Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402613.901 | DHR, ARES-G2, APS, Aluminum, 25 mm, Quick Change Disposable Plate(pkg. of 20) | APS Quick Change Disposable Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402751.901 | DHR, ARES-G2, APS, Quick Change Disposable Plate Holder | APS Quick Change Disposable Plates (for use with APS Standard Flat Plate) | Rheology - ARES |
| 402515.901 | ARES-G2, APS, Split Solvent Trap Cover for Cones and Parallel Plates | APS Solvent Trap Cover | Rheology - ARES |
| 402691.901 | ARES-G2, APS, Solvent Trap Cover for Concentric Cylinders | APS Solvent Trap Cover | Rheology - ARES |
| 402677.903 | ARES, Stainless Steel, Heat Break, Solvent Trap, 25 mm, Parallel Plate | ARES Solvent Trap - Heat Break Geometries (for use with Peltier Plate and APS) | Rheology - ARES |
| 402677.901 | ARES, Stainless Steel, Heat Break, Solvent Trap, 40 mm, Parallel Plate | ARES Solvent Trap - Heat Break Geometries (for use with Peltier Plate and APS) | Rheology - ARES |
| 402677.902 | ARES, Stainless Steel, Heat Break, Solvent Trap, 50 mm, Parallel Plate | ARES Solvent Trap - Heat Break Geometries (for use with Peltier Plate and APS) | Rheology - ARES |
| 402683.903 | ARES, PPS, Heat Break, Solvent Trap, 25 mm, Parallel Plate | ARES Solvent Trap - Heat Break Geometries (for use with Peltier Plate and APS) | Rheology - ARES |
| 402683.901 | ARES, PPS, Heat Break, Solvent Trap, 40 mm, Parallel Plate | ARES Solvent Trap - Heat Break Geometries (for use with Peltier Plate and APS) | Rheology - ARES |
| 402683.902 | ARES, PPS, Heat Break, Solvent Trap, 50 mm, Parallel Plate | ARES Solvent Trap - Heat Break Geometries (for use with Peltier Plate and APS) | Rheology - ARES |
| 402767.903 | ARES, Stainless Steel, Heat Break, Solvent Trap, Sandblasted, 25 mm,Parallel Plate | ARES Solvent Trap - Heat Break Geometries: Roughened Surface Plates | Rheology - ARES |
| 402767.901 | ARES, Stainless Steel, Heat Break, Solvent Trap, Sandblasted, 40 mm,Parallel Plate | ARES Solvent Trap - Heat Break Geometries: Roughened Surface Plates | Rheology - ARES |
| 402767.902 | ARES, Stainless Steel, Heat Break, Solvent Trap, Sandblasted, 50 mm,Parallel Plate | ARES Solvent Trap - Heat Break Geometries: Roughened Surface Plates | Rheology - ARES |
| 402766.902 | ARES, Stainless Steel, Heat Break, Solvent Trap, Cross Hatched, 25 mm,Parallel Plate | ARES Solvent Trap - Heat Break Geometries: Roughened Surface Plates | Rheology - ARES |
| 402766.901 | ARES, Stainless Steel, Heat Break, Solvent Trap, Cross Hatched, 40 mm,Parallel Plate | ARES Solvent Trap - Heat Break Geometries: Roughened Surface Plates | Rheology - ARES |
| 402766.903 | ARES, Stainless Steel, Heat Break, Solvent Trap, Cross Hatched, 50 mm,Parallel Plate | ARES Solvent Trap - Heat Break Geometries: Roughened Surface Plates | Rheology - ARES |
| 402761.901 | ARES, Stainless Steel, Heat Break, Solvent Trap, 25 mm, 1 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402762.901 | ARES, PPS, Heat Break, Solvent Trap, 25 mm, 1 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402760.903 | ARES, Stainless Steel, Heat Break, Solvent Trap, 40 mm, 1 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402760.901 | ARES, Stainless Steel, Heat Break, Solvent Trap, 40 mm, 2 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402764.903 | ARES, PPS, Heat Break, Solvent Trap, 40 mm, 1 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402764.901 | ARES, PPS, Heat Break, Solvent Trap, 40 mm, 2 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402763.903 | ARES, Stainless Steel, Heat Break, Solvent Trap, 50 mm, 1 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402763.901 | ARES, Stainless Steel, Heat Break, Solvent Trap, 50 mm, 2 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402765.903 | ARES, PPS, Heat Break, Solvent Trap, 50 mm, 1 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 402765.901 | ARES, PPS, Heat Break, Solvent Trap, 50 mm, 2 deg Cone | ARES Solvent Trap - Heat Break Geometries: Cones | Rheology - ARES |
| 401985.901 | ARES, Stainless Steel, 8 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 401981.901 | ARES, Stainless Steel, 25 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 402302.901 | ARES, Stainless Steel, 40 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 401968.901 | ARES, Stainless Steel, 50 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 401978.901 | ARES, Stainless Steel, Serrated, 25 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 401647.901 | ARES, Stainless Steel, Cross Hatched, 8 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 401667.901 | ARES, Stainless Steel, Cross Hatched, 25 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 401687.901 | ARES, Stainless Steel, Cross Hatched, 50 mm Parallel Plate | Stainless Steel Parallel Plate Geometries | Rheology - ARES |
| 402309.901 | ARES, Titanium, 25 mm Parallel Plate | Titanium Parallel Plate Geometries | Rheology - ARES |
| 402310.901 | ARES, Titanium, 50 mm Parallel Plate | Titanium Parallel Plate Geometries | Rheology - ARES |
| 402311.901 | ARES, PPS, 25 mm Upper Plate; Maximum Temperature = 150 °C | Polyphenylene Sulfide (PPS) Parallel Plate Geometries | Rheology - ARES |
| 402312.901 | ARES, PPS, 40 mm Upper Plate; Maximum Temperature = 150 °C | Polyphenylene Sulfide (PPS) Parallel Plate Geometries | Rheology - ARES |
| 402313.901 | ARES, PPS, 50 mm Upper Plate; Maximum Temperature = 150 °C | Polyphenylene Sulfide (PPS) Parallel Plate Geometries | Rheology - ARES |
| 402305.901 | ARES, Stainless Steel, 8 mm 0.1 rad Cone (5.73 deg) | ARES Stainless Steel Upper Cone Geometries | Rheology - ARES |
| 401977.901 | ARES, Stainless Steel, 25 mm 0.02 rad Cone (1.15 deg) | ARES Stainless Steel Upper Cone Geometries | Rheology - ARES |
| 401976.901 | ARES, Stainless Steel, 25 mm 0.04 rad Cone (2.29 deg) | ARES Stainless Steel Upper Cone Geometries | Rheology - ARES |
| 402317.901 | ARES, Stainless Steel, 25 mm 0.1 rad Cone (5.73 deg) | ARES Stainless Steel Upper Cone Geometries | Rheology - ARES |
| 401965.901 | ARES, Stainless Steel, 50 mm 0.02 rad Cone (1.15 deg) | ARES Stainless Steel Upper Cone Geometries | Rheology - ARES |
| 401963.901 | ARES, Stainless Steel, 50 mm 0.04 rad Cone (2.29 deg) | ARES Stainless Steel Upper Cone Geometries | Rheology - ARES |
| 401972.901 | ARES, Titanium, 25 mm 0.02 rad Cone (1.15 deg) | ARES Titanium Upper Cone Geometries | Rheology - ARES |
| 401975.901 | ARES, Titanium, 25 mm 0.04 rad Cone (2.29 deg) | ARES Titanium Upper Cone Geometries | Rheology - ARES |
| 401973.901 | ARES, Titanium, 25 mm 0.1 rad Cone (5.73 deg) | ARES Titanium Upper Cone Geometries | Rheology - ARES |
| 401964.901 | ARES, Titanium, 50 mm 0.02 rad Cone (1.15 deg) | ARES Titanium Upper Cone Geometries | Rheology - ARES |
| 401962.901 | ARES, Titanium, 50 mm 0.04 rad Cone (2.29 deg) | ARES Titanium Upper Cone Geometries | Rheology - ARES |
| 402314.901 | ARES, PPS, 25 mm 0.1 rad Cone; Maximum Temperature = 150 °C | ARES Polyphenylene Sulfide (PPS) Cone Geometries | Rheology - ARES |
| 402315.901 | ARES, PPS, 50 mm 0.04 rad Cone; Maximum Temperature = 150 °C | ARES Polyphenylene Sulfide (PPS) Cone Geometries | Rheology - ARES |
| 402303.901 | ARES, Stainless Steel, Disposable Plate FixtureNote: Requires disposable plates. | Stainless Steel Disposable Plate Fixture | Rheology - ARES |
| 700.01294.17 | Aluminum, 8 mm Disposable Plates (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01294.3 | Aluminum, 25 mm Disposable Plates (pkg. of 20 | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01294.4 | Aluminum, 40 mm Disposable Plates (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01294.5 | Aluminum, 50 mm Disposable Plates (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01294.11 | Serrated Aluminum, 8 mm Disposable Plates (pkg. of 2) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01294.6 | Serrated Aluminum, 25 mm Disposable Plates (pkg. of 2) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01294.7 | Serrated Aluminum, 50 mm Disposable Plates (pkg. of 2) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01295.9 | Stainless Steel, 8 mm Disposable Plates (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01295.3 | Stainless Steel, 25 mm Disposable Plates (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01295.4 | Stainless Steel, 40 mm Disposable Plates (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01295.5 | Stainless Steel, 50 mm Disposable Plates (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.01295.6 | Serrated Stainless Steel, 25 mm Disposable Plates (pkg. of 2) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.02678 | Aluminum, 42 mm Disposable Cup, (1 piece) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.02648 | Disposable Plate Sample Mold, 25 mm | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 402739.901 | Aluminum, 25 mm Disposable Plates with Drip Channel (pkg. of 20) | Aluminum and Stainless Steel Disposable Plates | Rheology - ARES |
| 700.02451.2 | Aluminum, 25 mm 0.02 rad (1.15 deg) Disposable Cone (pkg. of 10) | Aluminum Disposable Cones | Rheology - ARES |
| 700.02451.1 | Aluminum, 25 mm 0.1 rad (5.73 deg) Disposable Cone (pkg. of 10) | Aluminum Disposable Cones | Rheology - ARES |
| 700.02451.3 | Aluminum, 50 mm 0.04 rad (2.29 deg) Disposable Cone (pkg. of 10) | Aluminum Disposable Cones | Rheology - ARES |
| 554007.901 | Asphalt Sample Molds, 1 Pair | ARES Asphalt Accessories | Rheology - ARES |
| 700.02657.2 | ARES, RSA, and TAM Air Dryer | ARES Air and Calibration Accessories | Rheology - ARES |
| 700.01011 | PDMS, 2 oz | ARES Air and Calibration Accessories | Rheology - ARES |
| 700.01016 | Silicone Oil, 1000 cP | ARES Air and Calibration Accessories | Rheology - ARES |
| 400.02589 | Steel Reference Standard | ARES Air and Calibration Accessories | Rheology - ARES |
| 404131.901 | ARES-G2 Extensional Viscosity Accessory (EVA) | ARES-G2 Extensional Viscosity Accessory (EVA) | Rheology - ARES |
| 404140.902 | ARES-G2 Standard Drum Pair Set for EVA | ARES-G2 Extensional Viscosity Accessory (EVA) | Rheology - ARES |
| 404140.904 | ARES-G2 Knurled Surface Drum Pair Set for EVA | ARES-G2 Extensional Viscosity Accessory (EVA) | Rheology - ARES |
| 404140.906 | ARES-G2 Roughened Surface Drum Pair Set for EVA | ARES-G2 Extensional Viscosity Accessory (EVA) | Rheology - ARES |
| 403056.901 | DHR, ARES-G2 Replacement Clamps for EVA (pkg. of 6) | ARES-G2 Extensional Viscosity Accessory (EVA) | Rheology - ARES |
| 403090.001 | SER3 Universal Testing Platform for ARES/ARES-G2 | ARES Universal Testing Platform | Rheology - ARES |
| 200974.003 | SER3 Standard Drum Pair Set for ARES-G2/ARES Rheometers | ARES Universal Testing Platform | Rheology - ARES |
| 200975.003 | SER3 Knurled Surface Drum Pair Set for ARES-G2/ARES Rheometers | ARES Universal Testing Platform | Rheology - ARES |
| 200976.003 | SER3 Rough Surface Drum Pair Set for ARES-G2/ARES Rheometers | ARES Universal Testing Platform | Rheology - ARES |
| 200977.002 | Securing Clamps for DHR & AR SER3/2 and ARES-G2 SER3 (pkg. of 6) | ARES Universal Testing Platform | Rheology - ARES |
| 200978.001 | SER3 and SER2 Dual Blade Cutter Assembly | ARES Universal Testing Platform | Rheology - ARES |
| 200979.001 | Razor Blades for SER3 and SER2 Dual Blade Cutter Assembly (pkg. of 50) | ARES Universal Testing Platform | Rheology - ARES |
| 200974.001 | SER2 Standard Drum Pair Set for ARES Rheometers | ARES Universal Testing Platform | Rheology - ARES |
| 200975.001 | SER2 Knurled Surface Drum Pair Set for ARES Rheometers | ARES Universal Testing Platform | Rheology - ARES |
| 200976.001 | SER2 Rough Surface Drum Pair Set for ARES Rheometers | ARES Universal Testing Platform | Rheology - ARES |
| 200977.001 | SER2 Securing Clamps for ARES Rheometers (pkg. of 6) | ARES Universal Testing Platform | Rheology - ARES |
| 401827.901 | ARES Stainless Steel Helical Rotor | ARES Helical Mixer Geometry | Rheology - ARES |
| 402551.901 | ARES-G2 and RSA-G2 DETA Accessory Kit (LCR Meter NOT included):Note: Requires two ARES 25 mm DETA Geometries (P/N: 402553.901) andKeysight E4980A LCR Meter (P/N: 613.04946), orKeysight E4980AL LCR Meter (P/N: 203330.001). | ARES DETA: Dielectric Thermal Analysis Options | Rheology - ARES |
| 402553.901 | ARES 25 mm DETA GeometryNote: For use with the ARES DETA option (P/N: 402551.901). | ARES DETA: Dielectric Thermal Analysis Options | Rheology - ARES |
| 404000.901 | ARES-G2, Disposable DETA GeometryNote: For use with the ARES DETA option (P/N: 402551.901). | ARES DETA: Dielectric Thermal Analysis Options | Rheology - ARES |
| 613.04946 | Keysight E4980A LCR MeterNote: For ARES-G2, RSA-G2, and DHR DETA: frequency range: 20Hz to 2MHz; AC test signal (potential) 0.005 to 20 Volts (115/230VAC; 50/60Hz). | ARES DETA: Dielectric Thermal Analysis Options | Rheology - ARES |
| 203330.001 | Keysight E4980AL-102 LCR MeterNote: For ARES-G2, RSA-G2, and DHR DETA: frequency range: 20 Hz to 1 MHz;AC test signal (potential) 0.001 to 2 Volts (115/230V; 50/60 Hz). | ARES DETA: Dielectric Thermal Analysis Options | Rheology - ARES |
| 401177.901 | ARES-G2 UV-Curing Option without Light Source | ARES UV-Curing Options | Rheology - ARES |
| 401177.902 | ARES-G2 UV-Curing Option with Light Source | ARES UV-Curing Options | Rheology - ARES |
| 935014.901 | PCA/UV External Filter Adapter Accessory KitNote: Allows use of external filters with the PCA (P/N: 935000.901). | ARES UV-Curing Options | Rheology - ARES |
| 935009.001 | Filter, External, 320 - 480 nm(for the Omnicure S-2000 with external filter adapter) | ARES UV-Curing Options | Rheology - ARES |
| 935009.002 | Filter, External, 320 - 390 nm(for the Omnicure S-2000 with external filter adapter) | ARES UV-Curing Options | Rheology - ARES |
| 935009.004 | Filter, External, 400 - 500 nm(for the Omnicure S-2000 with external filter adapter) | ARES UV-Curing Options | Rheology - ARES |
| 935009.003 | Filter, External, 365 nm(for the Omnicure S-2000 with external filter adapter) | ARES UV-Curing Options | Rheology - ARES |
| 403153.001 | Quartz, 20 mm diameter, Parallel Plate for ARES and DHR/AR UV-CuringOptionNote: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of DHR/AR-UV option. | ARES UV-Curing Options | Rheology - ARES |
| 403171.002 | Stainless Steel, 20 mm diameter, Parallel Plate for ARES UV-OptionNote: For use with the lower plate fixture of ARES-UV option and Photo-Curing Option upper quartz plate and fixture. | ARES UV-Curing Options | Rheology - ARES |
| 403064.901 | Acrylic, 20 mm diameter, Disposable Parallel Plates for ARES UV-Option(pkg. of 10)Note: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of DHR/AR-UV option. | ARES UV-Curing Options | Rheology - ARES |
| 403065.901 | Aluminum, 20 mm diameter, Disposable Parallel Plates for ARES UV-Option(pkg. of 10)Note: For use with the lower plate fixture of ARES-UV option andPhoto-Curing Option upper quartz plate and fixture. | ARES UV-Curing Options | Rheology - ARES |
| 200400.001 | Replacement 5 mm diameter Light Guide for ARES and AR UV-Curingand Photo-Curing Options | ARES UV-Curing Options | Rheology - ARES |
| 403170.001 | Replacement Remote Radiometer/Dosimeter for ARES UV-Curing Option | ARES UV-Curing Options | Rheology - ARES |
| 402735.901 | ARES-G2 Draft Shield | ARES Draft Shield | Rheology - ARES |
| 401940.901 | ARES Electro-Rheological Analysis Accessory for ARES-G2 (110VAC) | ARES Electro-Rheological Analysis Option | Rheology - ARES |
| 401940.902 | ARES Electro-Rheological Analysis Accessory for ARES-G2 (220VAC) | ARES Electro-Rheological Analysis Option | Rheology - ARES |
| 402754.901 | ARES-G2, Electro-Rheology, Stainless Steel, 25 mm, Upper PlateNote: For upper use only and NOT compatible with the FCO. | ARES Electro-Rheological Analysis Option | Rheology - ARES |
| 402752.901 | ARES-G2, Electro-Rheology, Stainless Steel, 50 mm, Upper PlateNote: For upper use only and NOT compatible with the FCO. | ARES Electro-Rheological Analysis Option | Rheology - ARES |
| 402820.901 | ARES-G2, Double Wall Ring Interfacial (DWR) Rheology System:Note: Includes DWR Pt/Ir Ring Geometry and Delrin Trough, which mounts onthe APS Flat Plate.Requires APS Flat Plate (P/N: 402619.901) and APS Jacket(P/N: 402500.901). | ARES Interfacial (DWR) Rheology System | Rheology - ARES |
| 402825.901 | ARES-G2, Double Wall Ring, Pt-Ir | ARES Interfacial (DWR) Rheology System | Rheology - ARES |
| 404008.901 | Motor Boost Accessory for ARES-G2 | ARES Motor Boost Accessory | Rheology - ARES |
| 402796.901 | ARES-G2, APS, Titanium, OSP Slotted Double Gap Bob | ARES Orthogonal Superposition (OSP) Accessory | Rheology - ARES |
| 402796.902 | ARES-G2, APS, Titanium, OSP Slotted Narrow Gap Double Bob | ARES Orthogonal Superposition (OSP) Accessory | Rheology - ARES |
| 402782.901 | ARES-G2, APS, HA AL, 34 mm Dia., OSP Slotted Double Gap Cup | ARES Orthogonal Superposition (OSP) Accessory | Rheology - ARES |
| 708.01458 | ARES Linear Film/Fiber Testing ToolNote: For use with ARES-G2 and ARES Classic Instruments configured with2KFRTN transducers. | ARES Orthogonal Superposition (OSP) Accessory | Rheology - ARES |
| 532069.901 | ARES-G2, 3-Point Bending Geometry | ARES Orthogonal Superposition (OSP) Accessory | Rheology - ARES |
| 532070.901 | ARES-G2, Cantilever Bending Geometry | ARES Orthogonal Superposition (OSP) Accessory | Rheology - ARES |
| 533242.901 | Tribo-Rheometry Accessory Base Kit | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 532078.901 | ARES-G2, Tribo-Rheometry Coupling Adapter, Long | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 532078.902 | ARES-G2, Tribo-Rheometry Coupling Adapter, Short | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533273.902 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Short | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533273.901 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Medium | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533273.903 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Long | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533283.901 | Tribo-Rheometry, Ring on Plate Upper Geometry Holder | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533290.901 | Tribo-Rheometry, 3 Balls on Plate Upper Geometry Holder | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533249.901 | Tribo-Rheometry, 5/16” Truncated SST Balls (pkg. of 12) | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533250.901 | Tribo-Rheometry, 1/2” SST Balls (pkg. of 25) | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533284.901 | Tribo-Rheometry, Ring Upper Geometry (pkg. of 3) | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533274.901 | Tribo-Rheometry, Ball on 3 Balls Lower Geometry | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533281.901 | Tribo-Rheometry, SST Cup 45 mm Lower Geometry | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533282.901 | Tribo-Rheometry, 3 Plates Lower Geometry | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 533291.901 | Tribo-Rheometry, Ball on 3 Plates SST Test Plates (pkg. of 30) | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 523400.907 | Aluminum, 40 mm Disposable Plate | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 532079.901 | ARES-G2, FCO, Tribo-Rheometry Lower Geometry Holder | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 532080.901 | DHR, ARES-G2, APS, Tribo-Rheometry Lower Geometry Holder | ARES-G2 Tribo-Rheometry Accessory | Rheology - ARES |
| 402818.901 | ARES-G2 High Sensitivity Pressure CellNote: Requires Advanced Peltier System (P/N: 402500.901). | ARES-G2 Pressure Cell | Rheology - ARES |
| 402817.901 | Vane rotor for DHR & ARES-G2 High Sensitivity Pressure Cell (HSPC)Note: Requires DHR (P/N: 547050.901) or ARES-G2 (P/N: 402818.901) High Sensitivity Pressure Cell. | ARES-G2 Pressure Cell | Rheology - ARES |
| 708.01442 | ARES Optical Parallel Plate for OAMNote: Includes 38.1 mm upper and lower glass parallel plates. | ARES - CLASSIC ONLY (includes ARES, ARES-LS1, ARES-LS2, ARES-RDA, ARES-RFS, and ARES-HT) | Rheology - ARES |
| 471200.901 | Stress Relaxation Option for RPA flex | RPA flex Options | Rubber Testing |
| 471200.902 | Frequency Sweep Option for RPA flex | RPA flex Options | Rubber Testing |
| 471200.903 | Strain Sweep and LAOS Option for RPA flex | RPA flex Options | Rubber Testing |
| 471200.904 | Non-Linearity Measurement Option for RPA flex | RPA flex Options | Rubber Testing |
| 471200.905 | Advanced Oscillation Option for RPA flex | RPA flex Options | Rubber Testing |
| 474301.901 | Variable Die Closing Pressure Option for RPA flex | RPA flex Options | Rubber Testing |
| 473200.901 | Large Mooney MV one Viscometer Rotor (D = 38.1 mm) | MV one Options | Rubber Testing |
| 473210.901 | Small Mooney MV one Viscometer Rotor (D = 30.48 mm) | MV one Options | Rubber Testing |
| 474600.901 | RPA and MDR Volumetric Sample Cutter | Sample Cutters | Rubber Testing |
| 474700.901 | Mooney Volumetric Sample Cutter | Sample Cutters | Rubber Testing |
| 474100.901 | Automated Hardness Tester | Automated Hardness/Density Tester | Rubber Testing |
| 474200.901 | Automated Density Tester | Automated Hardness/Density Tester | Rubber Testing |
| 474253.001 | 20 Sample Magazine | Automated Hardness/Density Tester Options | Rubber Testing |
| 474253.002 | 30 Sample Magazine | Automated Hardness/Density Tester Options | Rubber Testing |
| 474300.901 | Air Cooling System | System Options/Accessories | Rubber Testing |
| 474320.901 | Torque StandardNote: TA Instruments Certified Torque Standard for Calibrating RPA and MDR Instruments. | System Options/Accessories | Rubber Testing |
| 474362.901 | Butyl Testing Material - RPA/MDR (pkg. of 6) | System Options/Accessories | Rubber Testing |
| 474361.901 | Butyl Testing Material - Mooney (pkg. of 6) | System Options/Accessories | Rubber Testing |
| 474340.901 | Standard Die Seal (pkg. of 10)Note: For use with MDR instruments only. | System Options/Accessories | Rubber Testing |
| 474350.901 | Long-Life Die Seal (pkg. of 10)Note: For use with RPA and MDR instruments. | System Options/Accessories | Rubber Testing |
| 474370.901 | Mooney Lower Die O-Rings (pkg. of 10)Note: For use in the MV one Mooney Viscometer. | System Options/Accessories | Rubber Testing |
| 202889.001 | Die/Rotor Cleaning Brush | System Options/Accessories | Rubber Testing |
| 202890.001 | Die/Rotor Metal Cleaning Pick | System Options/Accessories | Rubber Testing |
| 202891.001 | Film Roll - Polyester | System Options/Accessories | Rubber Testing |
| 202891.002 | Film Sheets - Polyester (pkg. of 1000) | System Options/Accessories | Rubber Testing |
| 202891.003 | Film Roll - Polyamide | System Options/Accessories | Rubber Testing |
| 202891.008 | Film Sheets – Polyamide (pkg. of 1000) | System Options/Accessories | Rubber Testing |
| 202928.131 | Gloves - High Temperature | System Options/Accessories | Rubber Testing |
| 202928.100 | Fan Filter (pkg. of 5) | System Options/Accessories | Rubber Testing |
| 470505.901 | Autoloader Clamp Bar PadsNote: Includes set of 10 gaskets, wrench, and Allen key. | System Options/Accessories | Rubber Testing |
| 471201.901 | Scarabeus Quality Systems (SQS) Software | Scarabeus Software Options | Rubber Testing |
| 471202.001 | Scarabaeus Quality Systems (SQS) Software for Accessories | Scarabeus Software Options | Rubber Testing |
| 202928.183 | Five-User SQL Database Workgroup License | Scarabeus Software Options | Rubber Testing |
| 202928.184 | Six-User Expandable SQL Database Hardware Server LicenseNote: Requires Hardware Server operating Windows Server version provided by the customer. | Scarabeus Software Options | Rubber Testing |
| 202928.227 | Six-User Add-On SQL Database Server LicenseNote: Requires SQL Database Hardware Server License(P/N: 202928.184, P/N 202928.225, or P/N 202928.226). | Scarabeus Software Options | Rubber Testing |
| 202928.185 | Unlimited-User 5GB SQL Database Virtual Server License | Scarabeus Software Options | Rubber Testing |
| 202928.225 | Ten-User Expandable SQL Database Server LicenseNote: Requires Hardware Server operating Windows Server version to beprovided by the customer. | Scarabeus Software Options | Rubber Testing |
| 202928.186 | Ten-User Add-On SQL Database Hardware Server LicenseNote: Requires SQL Database Hardware Server License(P/N: 202928.184, P/N 202928.225, or P/N 202928.226). | Scarabeus Software Options | Rubber Testing |
| 202928.226 | Twenty-User Expandable SQL Database Server LicenseNote: Requires Hardware Server operating Windows Server version to beprovided by the customer. | Scarabeus Software Options | Rubber Testing |
| 202928.228 | Twenty-User Add-On SQL Database Server LicenseNote: Requires SQL Database Hardware Server License(P/N: 202928.184, P/N 202928.225, or P/N 202928.226). | Scarabeus Software Options | Rubber Testing |
| 401892.901 | RSA-G2 Forced Convection Oven FCO | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 401711.901 | ARES-G2 and RSA-G2 FCO Camera | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 401041.901 | ARES-G2, RSA-G2 and DMA 3200 FCO LN2 Controller Option | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 405001.901 | ACS-2 Air Chiller System (240VAC; 60Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC; 50Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 405000.901 | ACS-3 Air Chiller System (240VAC; 60Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC/50Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 404041.901 | ARES-G2, RSA-G2, & DMA 3200 FCO Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 401798.901 | ARES/RSA3 to ARES-G2/RSA-G2 LN2 Upgrade Kit | RSA-G2 Temperature Options | RSA-G2 & DMA 850 |
| 708.01456 | RSA-G2 and DMA 3200 3-Point Bending Geometry | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01446 | RSA-G2 and DMA 3200 Cantilever Bending Geometry | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01455 | RSA-G2 and DMA 3200 Film / Fiber Geometry | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01464 | RSA-G2 and DMA 3200 Parallel Plate Compression Geometry | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01466.1 | Replacement 8 mm diameter PlatesNote: For RSA-G2 and DMA 3200 Compression Geometry. | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01466.2 | Replacement 15 mm diameter PlatesNote: For RSA-G2 and DMA 3200 Compression Geometry. | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01466.3 | Replacement 25 mm diameter PlatesNote: For RSA-G2 and DMA 3200 Compression Geometry. | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01461 | RSA-G2 and DMA 3200 Shear Sandwich Geometry | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 708.01465 | RSA-G2 Contact Lens Geometry Probe and Lens Holder | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 402198.901 | RSA Immersion Geometry and Installation KitNote: Includes Tension and 15 mm diameter Compression Fixtures.Also includes 10 mm, 15 mm, and 20 mm 3-point bending fixtures.Compatible with the RSA-G2. | RSA-G2 and RSA III Geometries | RSA-G2 & DMA 850 |
| 251471.002 | DSL Router with 4-Port SwitchNote: For communication between an external controller and Thermal and Rheology instruments. | Miscellaneous Accessories | RSA-G2 & DMA 850 |
| 203599.901 | Universal AC adapter kit for DSL Router | Miscellaneous Accessories | RSA-G2 & DMA 850 |
| 700.02657.2 | ARES, RSA, and TAM Air Dryer | Miscellaneous Accessories | RSA-G2 & DMA 850 |
| 402551.901 | ARES-G2 and RSA-G2 DETA Accessory Kit (LCR Meter not included)Note: Requires two RSA-G2 25 mm DETA Geometries (P/N: 402614.901)and customer-supplied Keysight E4980A LCR Meter (P/N: 613.04946), orKeysight E4980AL LCR Meter (P/N: 203330.001). | RSA-G2 DETA: Dielectric Thermal Analysis Options | RSA-G2 & DMA 850 |
| 402614.901 | RSA-G2 25 mm DETA GeometryNote: For use with the RSA-G2 DETA option (P/N: 402551.901). | RSA-G2 DETA: Dielectric Thermal Analysis Options | RSA-G2 & DMA 850 |
| 404005.901 | RSA-G2, Disposable DETA GeometryNote: For use with the RSA-G2 DETA option (P/N: 402551.901). | RSA-G2 DETA: Dielectric Thermal Analysis Options | RSA-G2 & DMA 850 |
| 613.04946 | Keysight E4980A LCR MeterNote: For ARES-G2 and RSA-G2 DETA: frequency range: 20Hz. to 2MHz.; AC test signal (potential) 0.005 to 20 Volts (115/230VAC; 50/60Hz). | RSA-G2 DETA: Dielectric Thermal Analysis Options | RSA-G2 & DMA 850 |
| 203330.001 | Keysight E4980AL-102 LCR MeterNote: For ARES-G2, RSA-G2, and DHR DETA: frequency range: 20Hz to 1MHz; AC test signal (potential) 0.001 to 2 Volts (115/230VAC; 50/60Hz). | RSA-G2 DETA: Dielectric Thermal Analysis Options | RSA-G2 & DMA 850 |
| 986320.901 | DMA 850 Filter/Regulator | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 986012.901 | Discovery DMA 850 Standard Furnace | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 985700.901 | DMA-RH (Relative Humidity) Accessory for DMA 850 & Q800 | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 986345.901 | DMA-RH DMA 850 Adapter | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 991600.901 | Gas Cooling Accessory - Auto Tank Fill (for cooling to -150 °C) | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 986350.901 | Air Compressor Accessory (ACA) for DMA 850 | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 986018.901 | Accessory Kit, DMA 850 (supplied with the DMA 850 module) | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 251471.002 | DSL Router with 4-Port Switch | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 405001.901 | ACS-2 Air Chiller System (240VAC; 60Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC; 50Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 405000.901 | ACS-3 Air Chiller System (240VAC; 60Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC; 50Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 986400.901 | DMA 850/Q800 DMA Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 986310.901 | Nitrogen Purge Cooler | DMA 850 Accessories | RSA-G2 & DMA 850 |
| 984048.901 | 8 mm Single/Dual Cantilever Clamp Kit | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984047.901 | 20 mm Single/Dual Cantilever Clamp Kit | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984015.901 | 35 mm Single / Dual Cantilever Kit for DMA 850 & Q800 | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984026.901 | 3-point Bending Clamp Kit (5, 10, and 15 mm lengths) | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984014.901 | 3-Point Bending Kit (20 and 50 mm) for DMA 850 & Q800 | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 986270.901 | Parallel Plate Compression Kit for DMA 850 & Q800 | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984022.901 | Penetration Clamp Kit | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 986252.901 | Film/Fiber Tension Kit DMA 850 / Q800 (Dual Screw Design, Mk III) | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 985016.901 | Film/Fiber Tension Kit DMA 850 / Q800 (Single Screw Design, Mk II) | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984023.901 | Specialty Fiber Tension Clamp Kit | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984017.901 | Shear Sandwich Clamp Kit | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 986260.901 | Submersion Compression Clamp Kit for DMA 850 | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 986261.901 | Submersion Film / Fiber Tension Kit for DMA 850 | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 986262.901 | Submersion 3-Point Bending Clamp Kit for DMA 850 | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 985069.901 | 3-point Bending Clamp Kit (50 mm, low friction) | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 985070.901 | 3-point Bending Clamp Kit (20 mm, low friction) | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 984486.901 | Film Cutting Kit | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 985164.901 | Powder KitNote: For use with 35 mm Cantilever Clamp Kit (P/N: 984015.901). | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 985018.901 | DMA-RH Accessory Clamp Kit for DMA 850 & Q800Note: Specifically for use with the DMA-RH Accessory. Includes clamp components for 10 mm 3-pt bending, penetration, and 15 mm compression clamps. | DMA 850 & Q800 Clamp Kits | RSA-G2 & DMA 850 |
| 259508.000 | Brass Tweezers | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 270962.002 | Telescoping GaugeNote: For 17 mm single cantilever clamps. | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 984370.901 | Furnace Inlet Ferrule/Spring Kit (pkg. of 5) | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 270976.002 | Filter/Regulator with Auto Drain | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 270975.001 | Filter Replacement, Auto Drain Regulator | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 985078.001 | Dual Cantilever Clamp Screen | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 985078.002 | Film/Fiber Tension Clamp Screen | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 985052.901 | Thermocouple Baffle | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 985098.901 | Q800 Submersion Clamp ThermocoupleNote: Required for customers who intend to use a DMA 850 submersionclamp kit with their Q800. Requires service engineer installation (quotedseparately). | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 986325.901 | DMA 850 Submersion Clamp ThermocoupleNote: Required for customers who intend to use an existing Q800submersion clamp kit with their new DMA 850. Requires service engineerinstallation (quoted separately). | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 985011.901 | Accessory Kit, Q800 DMA (supplied with the Q800 DMA module) | DMA 850 & Q800 Replacement Parts | RSA-G2 & DMA 850 |
| 900902.901 | Indium Temperature Calibration Sample | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 900907.901 | Zinc Temperature Calibration Sample | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984310.901 | Indium Wire, Film/Fiber Temperature Calibration (38 mm length)(pkg. of 10) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 980228.902 | Glass Support Cloth (0.2 mm thick, 33 m length) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 982161.902 | ABS Sample (3.18 mm thick, 61 mm length) (pkg. of 5) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 982161.903 | ABS Sample (3.18 mm thick, 36 mm length) (pkg. of 5) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 982165.902 | Polycarbonate Sample (1.6 mm thick, 60 mm length) (pkg. of 5) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 982165.903 | Polycarbonate Sample (1.6 mm thick, 36 mm length) (pkg. of 5) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 982165.904 | Polycarbonate Sample (0.79 mm thick, 36 mm length) (pkg. of 5) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984309.901 | Polyethylene Terephthalate (PET) Film (38 mm length) (pkg. of 10) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984313.901 | PET Fiber (910 mm length) | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984308.001 | DMA Calibration Standard 0.005 inch thick | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984308.002 | DMA Calibration Standard 0.010 inch thick | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984308.003 | DMA Calibration Standard 0.020 inch thick | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984308.004 | DMA Calibration Standard 0.030 inch thick | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 982166.003 | Compliance Sample - Dual Cantilever | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 982166.004 | Compliance Sample - Single Cantilever | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 984331.901 | Film/Fiber Tension Clamp Calibration Kit | DMA 850 & Q800 Calibration and Test Materials | RSA-G2 & DMA 850 |
| 611223.901 | SolCal Batch Accessory, 100 mL | Precision Solution | Microcalorimetry - TAM Systems |
| 611224.901 | Glass Cover slips, Box | Precision Solution | Microcalorimetry - TAM Systems |
| 611225.901 | O-Ring Viton for upper assembly (pkg. of 2) | Precision Solution | Microcalorimetry - TAM Systems |
| 611226.901 | O-Ring Viton for lower assembly, 12 mm (pkg. of 6) | Precision Solution | Microcalorimetry - TAM Systems |
| 700.02657.2 | Air Dryer for ARES, RSA, and TAM | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 320101 | Lifting Tool, Nanocalorimeter | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 320140 | Lifting Tool, Nanocalorimeter, for Heat Seal Ampoule | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 320601 | Lifting Tool, Minicalorimeter | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 320640 | Lifting Tool, Minicalorimeter, for Heat Seal Ampoule | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614106.901 | Pressure Release Lifter, Start-up Kit, 3 mL, TAM, (pkg. of 3) | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614107.901 | Pressure Release Lifter, Start-up Kit, 4 mL, TAM, (pkg. of 3) | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614108.901 | Pressure Release Lifter, 3 mL disposable glass ampoules, TAM, (pkg. of 3) | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614109.901 | Pressure Release Lifter, 4 mL disposable glass ampoules, TAM, (pkg. of 3) | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 604931.901 | Battery Lifting Tool, 20 mL Calorimeter | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 322001 | Lifting Tool, 20 mL Calorimeter | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 604226.901 | Lifting Tool, Macrocalorimeter | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 604227.901 | Macrocalorimeter Battery Lifter | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 611085.901 | Low Temperature Kit for TAM IV | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614152.901 | Lifting Tool, MicroXL | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614144.001 | O-Ring to MicroXL Lifting Tool | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614145.001 | O-Ring to Electrical Connector of MicroXL Lifting Tool | TAM IV/III Thermostat and Calorimeter Accessories | Microcalorimetry - TAM Systems |
| 614328.901 | Coin Cell Battery Lifting Tool for TAMIV 20 mL Calorimeters | TAM IV Accessories | Microcalorimetry - TAM Systems |
| 614331.901 | 18650 Battery Lifting Tool for TAMIV Macrocalorimeter | TAM IV Accessories | Microcalorimetry - TAM Systems |
| 614382.901 | Pouch Cell Battery Lifting Tool for TAMIV Micro XL Calorimeter | TAM IV Accessories | Microcalorimetry - TAM Systems |
| 614412.901 | Coin Cell External Battery Calibration Heater | TAM IV Accessories | Microcalorimetry - TAM Systems |
| 614414.901 | 18650 External Battery Calibration Heater | TAM IV Accessories | Microcalorimetry - TAM Systems |
| 614413.901 | Pouch Cell External Battery Calibration Heater (Micro XL) | TAM IV Accessories | Microcalorimetry - TAM Systems |
| 323906 | TAM Air Lifting Tool | TAM Air Thermostat Accessories | Microcalorimetry - TAM Systems |
| 311407 | TAM Air Top Lid (pkg. of 1)Note: Two lids required for each channel of the TAM Air Thermostat. | TAM Air Thermostat Accessories | Microcalorimetry - TAM Systems |
| 605111.001 | TAM Air Top Lid Plug 100 mL (pkg. of 1) | TAM Air Thermostat Accessories | Microcalorimetry - TAM Systems |
| 605275.901 | TAM Air 3 Channel Thermostat LidNote: Fits only TAM Air thermostat (P/N 605000.902). | TAM Air Thermostat Accessories | Microcalorimetry - TAM Systems |
| 605278.901 | TAM Air 8 Channel Thermostat LidNote: Fits only TAM Air thermostat (P/N 605000.902). | TAM Air Thermostat Accessories | Microcalorimetry - TAM Systems |
| 2606-21 | Start-Up Kit, Disposable Glass Ampoules, 20 mL | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 24.60.2001 | Ampoule, Glass, Disposable, 20 mL (pkg. of 113) | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 86.33.2000 | Aluminum Caps, Sealing Discs, Glass Ampoules, 20 mL (pkg. of 100) | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 2461-020 | Centering Tool, Disposable Glass Ampoule, 20 mL | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 202255.002 | Decapper Tool (20 mm)Note: A decapping tool for the 20 mL disposable glass ampoules(P/N: 24.26.2001), used in the TAM and the TAM Air. | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 2421-010 | Lifting Eyelet, Glass Ampoules, 4 and 20 mL | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 2462-000 | Cap Crimping Tool, Glass Ampoules, 20 mL | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 334601 | Lifting Eyelet for HDPE Plastic Ampoules, 20 mL (pkg. of 1) | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 3346-5 | HDPE Plastic Ampoules, 20 mL, with Screw-Cap (pkg. of 1000)Note: Temperature range: 5 °C to 50 °C. | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 3455 | TAM Air, Admix Ampoule, 20 mL, without Motor | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 3456-3 | TAM Air, Admix Ampoule, 20 mL, with Motor (115/230VAC, 50/60Hz) | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 345630 | Stirrer, Disposable, 20 mL, for Admix Ampoule (pkg. of 50) | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 345622 | Syringe, for use with the Admix Ampoule | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 345623 | Injection NeedleNote: For use with the Admix Ampoule. | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 323802 | TAM Air 20 mL Heat Sink Plug (pkg. of 1) | TAM Air Ampoules and Accessories 20 mL | Microcalorimetry - TAM Systems |
| 605160.901 | TAM Air, Start-Up Kit, 125 mL Disposable Glass Ampoule | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604579.901 | TAM Air, Start-Up Kit, 125 mL Disposable Glass Ampoules for Wet Samples | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604580.901 | Metal Lid for 125 mL Polished Glass Ampoule | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604736.901 | Polished Glass Ampoules for Wet Samples, 125 mL (pkg. of 20) | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604589.901 | O-Ring for Metal Lid for 125 mL Polished Glass Ampoule (pkg. of 2) | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604334.901 | 125 mL Glass Ampoule (pkg. of 20) | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604331.901 | Lifting Hook for 125 mL Glass Ampoule (pkg. of 1)Note: For use with the Glass Ampoule, 125 mL (P/N: 604334.901). | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604329.901 | Macrocalorimeter, 18650 Battery Adapter Kit | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604353.901 | C-Cell Battery Adapter Kit | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 604352.901 | D-Cell Battery Adapter Kit | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 614266.001 | TAM Air 100 mL Heat Sink Plug (pkg. of 1) | TAM Air Ampoules and Accessories 125 mL | Microcalorimetry - TAM Systems |
| 2277-301.3 | Ampoule, Hastelloy, 4 mL, with Threaded Cap (pkg. of 2) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-301 | Ampoule, Stainless Steel, 4 mL, with Threaded Cap (pkg. of 2) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-302 | Ampoules, Glass, Disposable, 3 mL, Start-Up Kit | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 24.20.0401 | Ampoules, Glass, Disposable, 4 mL (pkg. of 485) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 614217.901 | Ampoules, Glass, Disposable, 3 mL (pkg. of 485) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2502-11 | Ampoule, Glass, 1 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2502-12 | Ampoule, Hastelloy, 1 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2502-10 | Ampoule, Stainless Steel, 1 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2502-41 | Ampoule, Glass, 4 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3323 | Ampoule, Glass, 4 mL with Hastelloy Circlip Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2502-42 | Ampoule, Hastelloy, 4 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3320 | Ampoule, Hastelloy, 4 mL, with Thread/O-Ring Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2502-40 | Ampoule, Stainless Steel, 4 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3320-1 | Ampoule, Stainless Steel, 4 mL, with Thread/O-Ring Cap (pkg. of 1) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3330-4 | Start-Up Kit, 4 mL (with 12 Eyelets) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3330-3 | Start-Up Kit, 4 mL (with 50 Eyelets) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 86.33.0400 | Aluminum Caps, Sealing Discs, Glass Ampoules, 3 and 4 mL(pkg. of 100) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 614100.901 | Open Top Lids, 13 mm Aluminum, 3 and 4 mL Pressure Release Lifters,TAM, (pkg. of 100) | Static Ampoules 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2421-020 | Centering Tool, Disposable Glass Ampoule, 4 mL | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 202255.002 | Decapper ToolNote: A dual decapper tool for removing lids from the 3, 4 (13 mm) and 20 (20mm) mL disposable glass ampoules used in TAM III, TAM IV, and TAM Air. | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 614098.001 | Vial Decapper, 3 and 4 mL Pressure Release Lifters, TAM, (pkg. of 1) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2422-000 | Cap Adjustment Tool | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2421-032 | Hygrostat, Micro, 0.2 mL (pkg. of 100) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2421-033 | Hygrostat, Micro, 0.2 mL with height spring (pkg. of 100) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2252-460 | Lifting Eyelet, Ampoule, 1 mL | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2421-060 | Lifting Eyelet, Ampoules, Glass, 3 mL | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2421-010 | Lifting Eyelet, Ampoules, Glass, 4 and 20 mL | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2250-420 | Ampoule Seal, PTFE, 1 and 4 mL (pkg. of 5) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-305 | Seal Discs, PTFE, 4 mL, Threaded Cap (pkg. of 100) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3339 | Cap, Crimping Tool, Ampoules, 3 and 4 mL | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-315 | Clamping Tool with Safety Lock | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 604877.901 | Circlip Ampoule Lid Complete, 4 mL | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.25.1201 | Circlip, 12 mm (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.1001.1 | O-Ring, 10.4 x 1.0 mm Nitrile (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.1001.2 | O-Ring, 10.4 x 1.0 mm EPDM (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.1001.3 | O-Ring, 10.4 x 1.0 mm Viton (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.1001.4 | O-Ring, 10.4 x 1.0 mm Kalrez (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-307 | Steel Ampoule KeyNote: A locking tool to facilitate the sealing of 4 mL threaded cap ampoules(P/N: 2277-301 and P/N: 2277-301.3). | Consumables and Accessories 4 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2602-21 | Ampoule, Glass, 20 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 24.60.2001 | Ampoule, Glass, Disposable, 20 mL (pkg. of 113) | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3343 | Ampoule, Glass/Hastelloy, 20 mL, with Hastelloy Circlip Cap (pkg. of 1) | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2602-22 | Ampoule, Hastelloy, 20 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-309 | Ampoule, Stainless Steel, 20 mL, with Threaded Cap (pkg. of 1) | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 3340-1 | Ampoule, Stainless Steel, 20 mL, with Threaded O-Ring Cap | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2602-20 | Ampoule, Stainless Steel, 20 mL, with Circlip Cap (pkg. of 1) | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2606-21 | Start-Up Kit, Disposable Glass Ampoules, 20 mL | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 86.33.2000 | Aluminum Caps, Sealing Discs, Glass Ampoules, 20 mL (pkg. of 100) | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 604951.901 | Battery Ampoule, Stainless Steel, 20 mL, Circlip | Static Ampoules 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2461-020 | Centering Tool, Disposable Glass Ampoule, 20 mL | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 202255.002 | Decapper ToolNote: A dual decapper tool for removing lids from the 3, 4 (13 mm) and 20 (20mm) mL disposable glass ampoules used in TAM III, TAM IV, and TAM Air. | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2254-420 | Ampoule Seal, PTFE, 20 mL (pkg. of 5) | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-312 | PTFE Seal Discs, Threaded Cap, 20 mL (pkg. of 50) | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2277-315 | Clamping Tool with Safety Lock | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2421-010 | Lifting Eyelet, Glass Ampoules, 4 and 20 mL | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 2462-000 | Cap Crimping Tool, Glass Ampoules, 20 mL | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 604878.901 | Circlip Ampoule Lid Complete, 20 mL | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.25.2501 | Circlip, 25 mm (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.2201.1 | O-Ring, 22.1 x 1.6 mm Nitrile (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.2201.2 | O-Ring, 22.1 x 1.6 mm EPDM (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.2201.3 | O-Ring, 22.1 x 1.6 mm Viton (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 84.39.2201.4 | O-Ring, 22.1 x 1.6 mm Kalrez (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Calorimeters | Microcalorimetry - TAM Systems |
| 604328.901 | Start-Up Kit Glass Ampoule for the Macrocalorimeter | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604334.901 | 125 mL Glass Ampoule (pkg. of 20) | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604331.901 | Lifting Hook for 125 mL Glass Ampoule (pkg. of 1)Note: For use with the Glass Ampoule, 125 mL (P/N: 604334.901). | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604329.901 | Macrocalorimeter, 18650 Battery Adapter Kit | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604353.901 | C-Cell Battery Adapter Kit | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604352.901 | D-Cell Battery Adapter Kit | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604562.901 | 125 mL Stainless Steel Ampoule | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604584.001 | Circlip Plier for 125 mL Stainless Steel Ampoule | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604565.001 | Viton O-Ring for 125 mL Stainless Steel Ampoule (pkg. of 1) | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604563.001 | Circlip Ring for 125 mL Stainless Steel Ampoule (pkg. of 1) | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604580.901 | Metal Lid for 125 mL Polished Glass Ampoule | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604736.901 | 125 mL Polished Glass Ampoules for Wet Samples (pkg. of 20) | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 604589.901 | O-Ring for Metal Lid for 125 mL Polished Glass Ampoule (pkg. of 2) | Ampoules, Consumables, and Accessories Macrocalorimeter | Microcalorimetry - TAM Systems |
| 2225-130 | Reaction Vessel, Glass, 25 mL, with Bridge Plugs | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 2225-110 | Reaction Vessel, Glass, 100 mL, with Bridge Plugs | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 2226-130 | Titration Vessel, Glass, 25 mL, with Bridge Plugs | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 2226-110 | Titration Vessel, Glass, 100 mL, with Bridge Plugs | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 22.25.16XX | Bridge Plug, Temperature XX °CNote: XX = desired isothermal temperature (15 °C up to 80 °C), specify when ordering. For example: The Part Number for 15 °C would be 22.25.1615. | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 2225-150 | Crushing Ampoules, 1 mL, with Stopper (pkg. of 50) | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 2225-152 | Crushing Ampoules, 1 mL, Heat Seal with Filling Tube 2 mm | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 22.25.0190K | Stirrer, 18 K Gold, 25 mL | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 22.25.0190 | Stirrer, 18 K Gold, 100 mL | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 604890.001 | O-Ring for SolCal in Kalrez | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 611223.901 | SolCal Batch Accessory, 100 mL | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 611224.901 | Glass Cover slips, Box | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 611225.901 | O-Ring Viton for upper assembly (pkg. of 2) | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 611226.901 | O-Ring Viton for lower assembly, 12 mm (pkg. of 6) | Ampoules and Consumables Solution Calorimeter | Microcalorimetry - TAM Systems |
| 22.50.1200 | Shaft, Complete, Perfusion, 1 and 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.50.1200.3 | Shaft, Complete, Perfusion, Hastelloy, 1 and 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.50.1230.1 | Shaft, Lower, Perfusion, 18K Gold, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 604056.901 | Shaft, Complete, Stainless Steel, Titration, 1 mL Titration Ampoule(P/N: 3410-1) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 604061.901 | Shaft, Complete, Hastelloy, for 1 mL Titration Ampoule (P/N: 3410) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 611177.901 | Shaft, Complete, Titration, 18K Gold, 1 mL, Titration Ampoule (P/N: 3410-1) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.51.1200 | Shaft, Complete, Titration, 1 and 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.51.1200.1 | Shaft, Complete, Titration, 18K Gold, 1 and 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.51.1200.3 | Shaft, Complete, Titration, Hastelloy, 1 and 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.51.1230.1 | Shaft, Lower, Titration, 18K Gold, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-420 | Ampoule Seal, PTFE, 1 and 4 mL (pkg. of 5) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-452 | Reaction Vessel, Glass, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-453 | Reaction Vessel, Hastelloy, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-450 | Reaction Vessel, Stainless Steel, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-500 | Stirrer, Turbine, Kel-F, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-502 | Stirrer, Turbine, Kel-F with 18K Gold Shaft, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-503 | Stirrer, Turbine, Hastelloy, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-501 | Stirrer, Turbine, Stainless Steel, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-510 | Stirrer, Paddle, 18K Gold, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2250-520 | Propeller, 18K Gold, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 604295.901 | Secondary Propeller, Gold, 4 mLNote: For use with P/N: 2250-520 (Propeller, 18K Gold, 4 mL). | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 604425.901 | Stirrer, Double Propeller, Gold, 4 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2252-452 | Reaction Vessel, Glass, 1 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2252-453 | Reaction Vessel, Hastelloy, 1 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2252-450 | Reaction Vessel, Stainless Steel, 1 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2252-511 | Stirrer, Propeller, 18K Gold, 1 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 340151 | Propeller, Hastelloy, 1 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2252-530 | Stirrer, Turbine, Kel-F, 1 mL | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 3520 | Stirrer Holder for Glass Plates (with pkg. of 10 Glass Plates) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2256-510 | Cell Culture Glasses (pkg. of 10) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2256-520 | Matrix Cartridge | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.25.1201 | Circlip, 12 mm (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.1001.1 | O-Ring, 10.4 x 1.0 mm Nitrile (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.1001.2 | O-Ring, 10.4 x 1.0 mm EDPM (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.1001.3 | O-Ring, 10.4 x 1.0 mm Viton (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.1001.4 | O-Ring, 10.4 x 1.0 mm Kalrez (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.50.6000 | Rubber Stopper for Titration Ampoule | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 604769.901 | Cannula, Disposable (0.8 x 80 mm) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 604771.901 | MRS Reaction Vessel Circlip Plier | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.50.0500 | Perfusion Tubing Complete | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.55.2110 | Blind Plug RH Perfusion Ampoule (pkg. of 1) | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 605240.901 | Gas Perfusion Insert | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2251-990 | Titration Preparation Kit | Consumables and Accessories 1 mL/4 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.54.1230.1 | Shaft, Lower, Perfusion, 18K Gold, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.54.1231.1 | Shaft, Lower, Titration, 18K Gold, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.64.1200 | Shaft, Complete, Perfusion, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.64.1200.3 | Shaft, Complete, Perfusion, Hastelloy, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.64.1201 | Shaft, Complete, Titration, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.64.1201.3 | Shaft, Complete, Titration, Hastelloy, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 345600.12 | Shaft, Complete, Micro Solution Ampoule, TAM III & TAM IV | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-420 | Ampoule Seal, PTFE, 20 mL (pkg. of 5) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-452 | Reaction Vessel, Glass, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 334305 | Reaction Vessel, Glass/Hastelloy, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-453 | Reaction Vessel, Hastelloy, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-450 | Reaction Vessel, Stainless Steel, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2265-650 | Stirrer, Stainless Steel Turbine/Gold PropellerNote: For use with the 20 mL Microsolution Ampoule. | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-503 | Stirrer, Turbine, Hastelloy, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-500 | Stirrer, Turbine, PEEK, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-510 | Stirrer, Paddle, 18K Gold, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2254-511 | Stirrer, Paddle, Stainless Steel, 20 mL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2265-621 | Sample Cartridge, 20 μL, Channel 1 | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2265-622 | Sample Cartridge, 20 μL, Channel 2 | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2265-623 | Sample Cartridge, 20 μL, Channel 3 | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2265-641 | Sample Cartridge, 40 μL, Channel 1 | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2265-642 | Sample Cartridge, 40 μL, Channel 2 | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2265-643 | Sample Cartridge, 40 μL, Channel 3 | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.65.9011 | Loading Tube, Cartridge, 20 μL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.65.9010 | Loading Tube, Cartridge, 40 μL | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.65.9000 | Loading Tool | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.25.2501 | Circlip 25 mm (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.33.0503 | Blind Plug (pkg. of 1) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.55.2110 | Blind Plug RH Perfusion Ampoule (pkg. of 1) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.2201.1 | O-Ring, 22.1 x 1.6 mm Nitrile (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.2201.2 | O-Ring, 22.1 x 1.6 mm EPDM (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.2201.3 | O-Ring, 22.1 x 1.6 mm Viton (pkg. of 1) (for Circlip Ampoule) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.2201.4 | O-Ring, 22.1 x 1.6 mm Kalrez (pkg. of 1) (for Criclip Ampoule) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 84.39.0111.4 | O-Ring, 1.15 x 1.0 mm Kalrez (pkg. of 1) | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 22.50.0500 | Perfusion Tubing Complete | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 2251-990 | Titration Preparation Kit | Consumables and Accessories 20 mL Micro Reaction Systems | Microcalorimetry - TAM Systems |
| 322820 | Evacuation Station | Micro Reaction Pressure Systems | Microcalorimetry - TAM Systems |
| 322821 | Extension CableNote: For use with the 4 mL or 20 mL Vacuum/Pressure Ampoules. | Micro Reaction Pressure Systems | Microcalorimetry - TAM Systems |
| 3348-1 | Ampoule, High Pressure, 20 mLNote: Designed to hold pressures up to 10 bar. | Micro Reaction Pressure Systems | Microcalorimetry - TAM Systems |
| 334804 | Sintered Filters, 20 μMNote: Used with the 4 mL and 20 mL Vacuum/Pressure Ampoules. | Micro Reaction Pressure Systems | Microcalorimetry - TAM Systems |
| 6310-003 | Power Supply Stirrer 1 (115/230VAC; 50/60Hz) | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 6311-003 | Power Supply Stirrer 2 (115/230VAC; 50/60Hz) | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 3820 | Heat Sealer | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 604202.001 | Digital Block Heater 110VNote: Accepts the 4 mL, 20 mL, and 100 mL Block Inserts. | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 604201.001 | Digital Block Heater 220VNote: Accepts the 4 mL, 20 mL, and 100 mL Block Inserts. | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 604187.001 | Block Insert, 4 mLNote: Used with the Digital Block Heater 110VAC (P/N: 604202.001)or the Digital Block Heater 220VAC (P/N: 604201.001). | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 604203.001 | Block Insert, 20 mLNote: Used with the Digital Block Heater 110VAC (P/N: 604202.001)or the Digital Block Heater 220VAC (P/N: 604201.001). | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 604939.901 | Block Insert, 100 mL | TAM IV/III Auxiliary Equipment | Microcalorimetry - TAM Systems |
| 604650.001 | Syringe, 1 mL with Removable Needle | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 6140-017 | Syringe, 2.5 mL with Cannula, 18K Gold | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 6140-016 | Syringe, 2.5 mL with Cannula, Stainless Steel | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 604647.001 | Syringe, 100 μL with Removable Needle | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 604648.001 | Syringe, 250 μL with Removable Needle | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 604649.001 | Syringe, 500 μL with Removable Needle | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 604768.901 | Cannula for Removable Syringes in Gold 28 GA | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 604767.901 | Cannula for Removable Syringes in Stainless Steel 28 GA | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 604997.901 | Cannula for Removable Syringes in Stainless Steel 24 GA | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 6141-044 | Tubing for Peristaltic pump, grey (pkg. of 6) | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 611198.001 | Tubing for Peristaltic Pump, red (pkg. of 6) | Auxiliary Equipment Consumables and Accessories | Microcalorimetry - TAM Systems |
| 620721.901 | RS-DSC Accessory KitNote: Includes the following:Coverslip Punch Tray (P/N 620896.901);MFC Sample Press (P/N 620898.901);Coverslip Tweezers (P/N 620897.901);Rubber Coated Bent Tip Tweezers, (P/N 620899.901);Reference Peek Sample (P/N 620817.901);0.1-20ul Pipette Tips Box of 96 (620858.001);Eppendorf Research Plus 2-20ul Pipettor (P/N 620859.001);DPPC Test Kit (P/N 620848.901). | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620848.901 | TEST KIT DPPC RS-DSCNote: DPPC (Dipalmitoylphosphatidylcholine) lipid for temperature validation of the RS-DSC. | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620817.901 | Reference Peek Sample (pkg. of 50) | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620898.901 | MFC Sample Press | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620865.901 | Coverslips & MFCNote: This package offers five sets of 24 microfluidic devices (120 MFCs in total). | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620896.901 | Coverslip Punch Tray | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620899.901 | Tweezers Bent Tip, Rubber Coated | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620858.001 | Pipette Tips 0.1-20UL (Box of 96) | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620859.001 | Pipette EP Research Plus 2-20UL | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 620897.901 | Coverslip TweezersNote: For precise removal of adhesive-backed cover slips from the Coverslip Punch Tray (P/N 620896.901). | RS-DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602000.921 | Nano DSC Capillary Cell Accessory Kit | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6300-11 | Nano DSC Cylindrical Cell Accessory Kit | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602198.901 | Nano Diffenential Scanning Calorimeter (Nano DSC) Test KitNote: Contains water sample, glycine sample buffer, and lysozyme sample. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6326 | Complete Degassing Station (110/230VAC; 50/60Hz) | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601800.901 | Cell Cleaning Station | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601829.901 | Cleaning Station Accessory Kit | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 99552110 | Clear Plastic Vacuum DomeNote: For Complete Degassing Station (P/N: 6326). | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 603028 | Vacuum Connection Hose AssemblyNote: For Complete Degassing Station (P/N: 6326). | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 603050.901 | 96-well Plate Adapter for Degassing Station | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6111 | Vinyl Caps (pkg. of 20) (for Capillary Cell)Note: Recommended capillary cell consumable spare. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6312 | Pressure Cap O-Ring (pkg. of 2)Note: Recommended capillary cell consumable spare. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6313 | Pressure Cap | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6114 | Tubing, Monosil, 3 feet (pkg. of 2)Note: Recommended capillary cell consumable spare. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6115 | Micropipetter (500 - 2500 μL) for Capillary Cell | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6116 | Pipetter Tips (pkg. of 100)Note: Used with Micropipetter (500 - 2500 μL) (P/N: 6115). | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6117 | Cylindrical Cell Cleaning Tool | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6118 | O-Ring for Cylindrical Cell Cleaning Tool (pkg. of 4)Note: Recommended cylindrical cell consumable spare. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6119 | Syringe, 1 mL (for Cylindrical Cell)Note: Recommended cylindrical cell consumable spare. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 6120 | Syringe Needle (5 inch) (for Cylindrical Cell)Note: Recommended cylindrical cell consumable spare. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601943.901 | Waste Tube for Affinity ITC and Auto NanoDSC | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602035.001 | AutoSampler Cable External (Qty. 1)Note: External cable for connecting the AutoSampler Interface (P/N: 602070.901) that is positioned on top of the Nano DSC (P/N: 6300) to the rear of the Nano DSC instrument. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602214.901 | AutoSampler Cable External (Qty. 1)Note: External cable for connection of the Nano DSC AutoSampler Interface(P/N: 602215.901) to the Nano DSC Instrument (P/N: 602000.901). | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602067.901 | AutoSampler Solvent Inlet Assembly (pkg. of 1) | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602068.901 | AutoSampler Waste Line Assembly (pkg. of 2) | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602069.901 | AutoSampler Interface Tubing Assembly (pkg. of 1) | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602071.001 | 96-Deep Well Plate (sample volume = 1.64 mL) (pkg. of 1)Note: For use with the Nano DSC AutoSampler. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 602072.001 | Sealing Mat 96-Well (pkg. of 1)Note: For use with the Nano DSC AutoSampler. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 99555610 | Cable, USB, 6 Ft. (pkg. of 1)Note: Used to connect the Nano DSC AutoSampler to the computer. | Nano DSC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601800.901 | Cell Cleaning Station | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601829.901 | Cleaning Station Accessory Kit | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601700.901 | Affinity ITC Auto 96-Well Plate (1.64 mL), (pkg. of 10) | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601701.901 | Affinity ITC Auto 96-Well Plate (2.0 mL), (pkg. of 10) | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601740.901 | Affinity ITC LV Accessory KitNote: Contains parts required for use including loading tools, side arm flask, tweezers, and cleaning adaptor. | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601751.901 | Affinity ITC SV Accessory KitNote: Contains parts required for use including loading tools, side arm flask, tweezers, and cleaning adaptor. | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601753.901 | Affinity ITC Injection Syringe Assembly (250 μL) | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5347 | Cell Filling Syringe with Needle (0.5 mL)Note: Recommended spare for the Nano ITC Low Volume (190 μL) instrument.NOT recommended for use with the Nano ITC Standard Volume (1 mL) instrument. | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5342 | Cell Filling Syringe for Nano ITC Standard Volume InstrumentNote: Recommended consumable spares. | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601942.901 | Titrant Filling Syringe (0.250 mL)Note: Recommended spare for the Affinity ITC instrument. | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601756.901 | Affinity ITC LV Injection Cannula | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601757.901 | Affinity ITC SV Injection Cannula | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601675.901 | Affinity ITC LV Stirring Paddle Assembly | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601676.901 | Affinity ITC SV Stirring Paddle Assembly | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601758.901 | Affinity ITC Sample Load Adapter | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601759.901 | Affinity ITC Titrant Handling Needle | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601943.901 | Waste Tube for Affinity ITC and Auto NanoDSC | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601760.901 | Affinity ITC Auto LV Cell Fill/Wash Needle | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601761.901 | Affinity ITC Auto SV Cell Fill/Wash Needle | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601762.901 | Affinity ITC Autosampler Sample Loop | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601763.901 | Affinity ITC Sample Transfer Line Kit | Affinity ITC System - Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601000.921 | Nano ITC Low Volume Accessory KitNote: Contains parts required for use including loading tools, side arm flask, tweezers, and cleaning adaptor. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601001.921 | Nano ITC Standard Volume Accessory KitNote: Contains parts required for use including loading tools, side arm flask, tweezers, and cleaning adaptor. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601863.901 | Nano & Affinity ITC Test KitNote: Contains DDI H2O, Ca2+ and EDTA in 10 mM MES buffer, pH 6.0. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 99552090 | Teflon Coated Stir Rod for 1 mL Conical Vials | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 99552100 | Teflon Coated Round Stir Rod (3 mm x 6.35 mm) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 99552102 | Teflon Coated Round Stir Rod (8 mm x 25 mm) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 73714210 | Vacuum Flask, Side Arm, 1000 mL | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 4801 | 1L Side-Arm Vacuum Flask Accessory (Glass) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5312 | O-Ring for Nano ITC Titration Buret, (pkg. of 2) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5317 | Stainless Steel Cleaning ToolNote: For the Nano ITC Standard Volume (1 mL) Instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601028.901 | Stainless Steel Cleaning ToolNote: For the Nano ITC Low Volume (190 μL) Instrument). | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5319 | Vacuum Cup Replacement for Cleaning Tool for Titration Cell (P/N: 5317) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5342 | Cell Filling Syringe for Nano ITC Standard Volume InstrumentNote: Recommended consumable spares. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5343 | Filling Syringe Needle for Nano ITC Standard Volume (pkg. of 3)Note: Recommended consumable spares. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5344 | Titration Syringe with Needle (100 μL)Note: Recommended spare for the Nano Standard Volume (1 mL) instrument.NOT for use with the Nano ITC Low Volume (190 μL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5345 | Titration Syringe with Needle (250 μL)Note: Recommended spare for the Nano Standard Volume (1 mL) instrument).NOT for use with the Nano ITC Low Volume (190 μL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 305155610 | Dummy ITC NeedleNote: For use in the reference cell of the Nano ITC Standard Volume (1 mL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601029.901 | Dummy ITC NeedleNote: For use in the reference cell of the Nano ITC Low Volume (190 μL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5346 | Titration Syringe with Needle (50 μL)Note: Recommended spare for Nano ITC Low Volume (190 μL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5347 | Cell Filling Syringe with Needle (0.5 mL)Note: Recommended spare for the Nano ITC Low Volume (190 μL) instrument.NOT for use with the Nano ITC Standard Volume (1 mL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5348 | Cell Filling Syringe (0.5 mL)Note: Recommended spare for the Nano ITC Low Volume (190 μL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 5349 | Filling Syringe Needle (pkg. of 3)Note: Recommended spare for the Nano ITC Low Volume (190 μL) instrument.NOT for use with the Nano ITC Standard Volume (1 mL) instrument. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601169.901 | Nano ITC Standard Buret HandleNote: NOT for use with organic solvents. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601220.901 | Nano ITC Organic Solvent Buret HandleNote: For use with the Nano ITC when using organic solvents. | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601234.901 | Nano ITC Buret and Syringe Stand Kit | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601221.001 | Nano ITC Buret O-Rings (Kalrez), (pkg. of 1) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601277.001 | Titration Syringe Plunger, 50 μL | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601278.001 | Titration Syringe Plunger, 100 μL | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601279.001 | Titration Syringe Plunger, 250 μL | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601274.901 | Titration Syringe with Needle, 50 μL (Organic Solvent Compatible) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601275.901 | Titration Syringe with Needle, 100 μL (Organic Solvent Compatible) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 601276.901 | Titration Syringe with Needle, 250 μL (Organic Solvent Compatible) | Nano ITC System Accessories and Consumables | Microcalorimetry - Nano Systems |
| 600072.901 | MC DSC Accessory Kit | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 600086.001 | MC DSC Gas Flow Meter StandNote: Only for use with MC DSC Gas Flow Meter (P/N: 600088.901). | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 4129 | Gas Regulator (0 to 4000 psi/0 to 15 psi)Note: North American use ONLY. | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 4130 | Second User Ampoule Kit, (pkg. of 4) | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 4128-1 | High Capacity Cooling Bath (115VAC) | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 4128-2 | High Capacity Cooling Bath (230VAC) | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 4175 | Batch Mixing Ampoule Kit, (pkg. of 3) | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 4176 | Probe Accessible Cells, (pkg. of 4) | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 200266.001 | RCS Gas DryerNote: Also for use with the Multi-Cell DSC System. | Multi-Cell DSC System Accessories and Components | Microcalorimetry - Nano Systems |
| 203818.001 | Flash Diffusivity Circulator TCube Edge Model 5A for 500-1600 °C Furnaces | Xenon and Laser Flash Parts and Accessories (DXF and DLF) | Thermal Conductivity |
| 203854.903 | TCube Edge Circulating Fluid | Xenon and Laser Flash Parts and Accessories (DXF and DLF) | Thermal Conductivity |
| 202315.001 | Vacuum Module for DXF-200+/500/900 & DLF-1200/1600/2800Note: Includes vacuum pump, thermocouple, and gauge. | Xenon and Laser Flash Parts and Accessories (DXF and DLF) | Thermal Conductivity |
| 202316.001 | Graphite Spray Paint (10 oz. can) for DXF/DLF Sample Preparation | Xenon and Laser Flash Parts and Accessories (DXF and DLF) | Thermal Conductivity |
| 202417.001 | Graphite Brush-on Paint | Xenon and Laser Flash Parts and Accessories (DXF and DLF) | Thermal Conductivity |
| 853161.901 | Silver Paint (1 oz. Vial) for DXF-200 Sample Preparation | Xenon and Laser Flash Parts and Accessories (DXF and DLF) | Thermal Conductivity |
| 853155.901 | Alumina Reference (with data) 8 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Alumina Reference Materials | Thermal Conductivity |
| 853156.001 | Alumina Reference (with data) 10 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Alumina Reference Materials | Thermal Conductivity |
| 853154.001 | Alumina Reference (with data) 12.7 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Alumina Reference Materials | Thermal Conductivity |
| 853809.901 | Vespel Reference (with data) 8 mm Square x 1.27 mm Thick | Xenon and Laser Flash - Vespel Reference Materials | Thermal Conductivity |
| 853810.901 | Vespel Reference (with data) 10 mm Square x 1.27 mm Thick | Xenon and Laser Flash - Vespel Reference Materials | Thermal Conductivity |
| 853811.901 | Vespel Reference (with data) 12.7 mm Square x 1.27 mm Thick | Xenon and Laser Flash - Vespel Reference Materials | Thermal Conductivity |
| 853813.901 | Vespel Reference (with data) 8 mm OD x 1.27 mm Thick | Xenon and Laser Flash - Vespel Reference Materials | Thermal Conductivity |
| 853814.901 | Vespel Reference (with data) 10 mm OD x 1.27 mm Thick | Xenon and Laser Flash - Vespel Reference Materials | Thermal Conductivity |
| 853152.901 | Vespel Reference (with data) 12.7 mm OD x 1.27 mm Thick | Xenon and Laser Flash - Vespel Reference Materials | Thermal Conductivity |
| 853812.901 | Vespel Reference (with data) 25.4 mm OD x 1.27 mm Thick | Xenon and Laser Flash - Vespel Reference Materials | Thermal Conductivity |
| 853815.901 | Electrolytic Iron Reference (with data) 8 mm Square x 2.54 mm Thick | Xenon and Laser Flash - Electrolytic Iron Reference Materials | Thermal Conductivity |
| 853816.901 | Electrolytic Iron Reference (with data) 10 mm Square x 2.54 mm Thick | Xenon and Laser Flash - Electrolytic Iron Reference Materials | Thermal Conductivity |
| 853817.901 | Electrolytic Iron Reference (with data) 12.7 mm Square x 2.54 mm Thick | Xenon and Laser Flash - Electrolytic Iron Reference Materials | Thermal Conductivity |
| 853818.901 | Electrolytic Iron Reference (with data) 8 mm OD x 2.54 mm Thick | Xenon and Laser Flash - Electrolytic Iron Reference Materials | Thermal Conductivity |
| 853819.901 | Electrolytic Iron Reference (with data) 10 mm OD x 2.54 mm Thick | Xenon and Laser Flash - Electrolytic Iron Reference Materials | Thermal Conductivity |
| 853145.901 | Electrolytic Iron Reference (with data) 12.7 mm OD x 2.54 mm Thick | Xenon and Laser Flash - Electrolytic Iron Reference Materials | Thermal Conductivity |
| 853146.901 | Electrolytic Iron Reference (with data) 25.4 mm OD x 2.54 mm Thick | Xenon and Laser Flash - Electrolytic Iron Reference Materials | Thermal Conductivity |
| 853820.901 | OFHC Copper Reference (with data) 8 mm Square x 5.08 mm Thick | Xenon and Laser Flash - OFHC Copper Reference Materials | Thermal Conductivity |
| 853821.901 | OFHC Copper Reference (with data) 10 mm Square x 5.08 mm Thick | Xenon and Laser Flash - OFHC Copper Reference Materials | Thermal Conductivity |
| 853822.901 | OFHC Copper Reference (with data) 12.7 mm Square x 5.08 mm Thick | Xenon and Laser Flash - OFHC Copper Reference Materials | Thermal Conductivity |
| 853824.901 | OFHC Copper Reference (with data) 8 mm OD x 5.08 mm Thick | Xenon and Laser Flash - OFHC Copper Reference Materials | Thermal Conductivity |
| 853825.901 | OFHC Copper Reference (with data) 10 mm OD x 5.08 mm Thick | Xenon and Laser Flash - OFHC Copper Reference Materials | Thermal Conductivity |
| 853147.901 | OFHC Copper Reference (with data) 12.7 mm OD x 5.08 mm Thick | Xenon and Laser Flash - OFHC Copper Reference Materials | Thermal Conductivity |
| 853823.901 | OFHC Copper Reference (with data) 25.4 mm OD x 5.08 mm Thick | Xenon and Laser Flash - OFHC Copper Reference Materials | Thermal Conductivity |
| 853826.901 | Molybdenum Reference (with data) 8 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Molybdenum Reference Materials | Thermal Conductivity |
| 853827.901 | Molybdenum Reference (with data) 10 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Molybdenum Reference Materials | Thermal Conductivity |
| 853828.901 | Molybdenum Reference (with data) 12.7 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Molybdenum Reference Materials | Thermal Conductivity |
| 853830.901 | Molybdenum Reference (with data) 8 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Molybdenum Reference Materials | Thermal Conductivity |
| 853831.901 | Molybdenum Reference (with data) 10 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Molybdenum Reference Materials | Thermal Conductivity |
| 853157.901 | Molybdenum Reference (with data) 12.7 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Molybdenum Reference Materials | Thermal Conductivity |
| 853829.901 | Molybdenum Reference (with data) 25.4 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Molybdenum Reference Materials | Thermal Conductivity |
| 853832.901 | Stainless Steel Reference (with data) 8 mm Square x 1.58 mm Thick | Xenon and Laser Flash - Stainless Steel Reference Materials | Thermal Conductivity |
| 853833.901 | Stainless Steel Reference (with data) 10 mm Square x 1.58 mm Thick | Xenon and Laser Flash - Stainless Steel Reference Materials | Thermal Conductivity |
| 853834.901 | Stainless Steel Reference (with data) 12.7 mm Square x 1.58 mm Thick | Xenon and Laser Flash - Stainless Steel Reference Materials | Thermal Conductivity |
| 853835.901 | Stainless Steel Reference (with data) 8 mm OD x 1.58 mm Thick | Xenon and Laser Flash - Stainless Steel Reference Materials | Thermal Conductivity |
| 853836.901 | Stainless Steel Reference (with data) 10 mm OD x 1.58 mm Thick | Xenon and Laser Flash - Stainless Steel Reference Materials | Thermal Conductivity |
| 853143.901 | Stainless Steel Reference (with data) 12.7 mm OD x 1.58 mm Thick | Xenon and Laser Flash - Stainless Steel Reference Materials | Thermal Conductivity |
| 853144.901 | Stainless Steel Reference (with data) 25.4 mm OD x 1.58 mm Thick | Xenon and Laser Flash - Stainless Steel Reference Materials | Thermal Conductivity |
| 853805.901 | Thermographite Reference (with data) 8 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Thermographite Reference Materials | Thermal Conductivity |
| 853137.901 | Thermographite Reference (with data) 10 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Thermographite Reference Materials | Thermal Conductivity |
| 853139.901 | Thermographite Reference (with data) 12.7 mm Square x 3.175 mm Thick | Xenon and Laser Flash - Thermographite Reference Materials | Thermal Conductivity |
| 853837.901 | Thermographite Reference (with data) 8 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Thermographite Reference Materials | Thermal Conductivity |
| 853136.901 | Thermographite Reference (with data) 10 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Thermographite Reference Materials | Thermal Conductivity |
| 853135.901 | Thermographite Reference (with data) 12.7 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Thermographite Reference Materials | Thermal Conductivity |
| 853142.901 | Thermographite Reference (with data) 25.4 mm OD x 3.175 mm Thick | Xenon and Laser Flash - Thermographite Reference Materials | Thermal Conductivity |
| 117835.001 | Adapter Ring, Aluminum, 25.4 mm Diameter to 8 mm Diameter, DXF-200 | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 119919.001 | Adapter Ring, Aluminum, 25.4 mm Diameter to 8 mm Square, DXF-200 | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 119916.001 | Adapter Ring, Aluminum, 25.4 mm Diameter to 10 mm Diameter, DXF-200 | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 119918.001 | Adapter Ring, Aluminum, 25.4 mm Diameter to 10 mm Square, DXF-200 | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 117808.001 | Adapter Ring, Aluminum, 25.4 mm Diameter to 12.7 mm Square, DXF-200 | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 853866.901 | In-Plane Test Kit, Stainless Steel, 25.4mm OD, DXF-200/200+ | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 853865.901 | Liquid/Powder Test Kit, 25.5mm OD, DXF-200/200+Note: NOT for use with the DXF-500 or DXF-900 models. | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 856770.901 | Laminated Sample Holder Kit, 5/8” OD, DXF 200/500/900 & DLF 1200/1600/2800Note: Max temperature 900 °C. | Xenon and Laser Flash - DXF-200/200+ Sample Holders | Thermal Conductivity |
| 856292.901 | Sample Isolator Ring Set, 8 mm OD/SQ, DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856293.901 | Sample Isolator Ring Set, 10 mm OD/SQ, DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 853642.901 | Sample Isolator Ring Set, 12.7 mm OD/SQ, DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856289.901 | Sample Holder, Single Block, 4-Position, Mullite, 8 mm OD, DXF500/900& DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856291.901 | Sample Holder, Single Block, 4-Position, Mullite, 8 mm SQ, DXF500/900& DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856285.901 | Sample Holder, Single Block, 4-Position, Mullite, 10 mm OD, DXF500/900& DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856287.901 | Sample Holder, Single Block, 4-Position, Mullite, 10 mm SQ, DXF500/900& DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 853698.901 | Sample Holder, Single Block, 4-Position, Mullite, 12.7 mm OD DXF500/900& DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856283.901 | Sample Holder, Single Block, 4-Position, Mullite, 12.7 mm SQ, DXF500/900& DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 853699.901 | Sample Holder, Single Block, 2-Position, Mullite, 25.4 mm Diameter,DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856298.901 | Sample Holder, Single Block, 4-Position, Mullite, 8 mm Diameter, plus Ring,DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856298.902 | Sample Holder, Single Block, 4-Position, Mullite, 8 mm Square, plus Ring,DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856297.901 | Sample Holder, Single Block, 4-Position, Mullite, 10 mm Diameter, plusRing, DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856297.902 | Sample Holder, Single Block, 4-Position, Mullite, 10 mm Square, plus Ring,DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856296.901 | Sample Holder, Single Block, 4-Position, Mullite, 12.7 mm Diameter, plusRing, DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856296.902 | Sample Holder, Single Block, 4-Position, Mullite, 12.7 mm Square, plusRing, DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856752.901 | In-Plane Test Kit, Stainless Steel, 25.4 mm OD, DXF-500/900 & DLF-1200 | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856744.901 | Liquid Sample Test Kit, Stainless Steel, 25.4 mm OD, DXF-500/900 & DLF-1200Note: Max temperature 900°C. | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 856770.901 | Laminated Sample Holder Kit, 5/8” OD, DXF 200/500/900 & DLF 1200/1600/2800Note: Max temperature 900 °C. | Xenon and Laser Flash - DXF-500/900 & DLF-1200 Sample Holders | Thermal Conductivity |
| 116794.001 | Adapter Ring, Molybdenum, 8 mm Diameter, EM-1600 | Xenon and Laser Flash - EM-1600 Sample Holders | Thermal Conductivity |
| 853132.901 | Adapter Ring, Molybdenum, 8 mm Square, EM-1600 | Xenon and Laser Flash - EM-1600 Sample Holders | Thermal Conductivity |
| 116791.001 | Adapter Ring, Molybdenum, 10 mm Diameter, EM-1600 | Xenon and Laser Flash - EM-1600 Sample Holders | Thermal Conductivity |
| 116795.001 | Adapter Ring, Molybdenum, 10 mm Square, EM-1600 (4-position only) | Xenon and Laser Flash - EM-1600 Sample Holders | Thermal Conductivity |
| 116790.001 | Adapter Ring, Molybdenum, 12.7 mm Diameter, EM-1600 | Xenon and Laser Flash - EM-1600 Sample Holders | Thermal Conductivity |
| 856745.901 | Liquid Sample Holder Kit - 15.9 mm OD for DLF 1600Note: NOT compatible with DXF and DLF-1200 models. | Xenon and Laser Flash - EM-1600 Sample Holders | Thermal Conductivity |
| 856770.901 | Laminated Sample Holder Kit, 5/8” OD, DXF 200/500/900 & DLF 1200/1600/2800Note: Max temperature 900 °C. | Xenon and Laser Flash - EM-1600 Sample Holders | Thermal Conductivity |
| 116797.001 | Adapter Ring, Graphite, 8 mm Diameter, EM-2800 | Xenon and Laser Flash - EM-2800 Sample Holders | Thermal Conductivity |
| 116798.001 | Adapter Ring, Graphite, 8 mm Square, EM-2800 | Xenon and Laser Flash - EM-2800 Sample Holders | Thermal Conductivity |
| 116796.001 | Adapter Ring, Graphite, 10 mm Diameter, EM-2800 | Xenon and Laser Flash - EM-2800 Sample Holders | Thermal Conductivity |
| 856770.901 | Laminated Sample Holder Kit, 5/8” OD, DXF 200/500/900 & DLF 1200/1600/2800Note: Max temperature 900 °C. | Xenon and Laser Flash - EM-2800 Sample Holders | Thermal Conductivity |
| 854135.001 | Heat Transfer Compound, Jar, DTC-25/DTC-300 | Thermal Conductivity Parts and Accessories - DTC Instruments | Thermal Conductivity |
| 854100.901 | Paste Cell, 50.8 mm OD, DTC-25/DTC-300 | Thermal Conductivity Parts and Accessories - DTC Instruments | Thermal Conductivity |
| 854101.901 | Liquid Cell, 50.8 mm OD, DTC-25/DTC-300 | Thermal Conductivity Parts and Accessories - DTC Instruments | Thermal Conductivity |
| 854154.901 | Liquid Cell Seal Kit (pkg. of 4)Note: For use in the DTC-300 Thermal Conductivity Meter. | Thermal Conductivity Parts and Accessories - DTC Instruments | Thermal Conductivity |
| 854330.901 | Polymer thru the Melt Cell, DTC-300 | Thermal Conductivity Parts and Accessories - DTC Instruments | Thermal Conductivity |
| 854203.901 | Spacer Seal Ring KitNote: For the Polymer thru the Melt Cell DTC-300 (P/N: 854330.901). | Thermal Conductivity Parts and Accessories - DTC Instruments | Thermal Conductivity |
| 202610.001 | Chiller/Circulator, 6L Reservoir, 120VACNote: For use with the DTC-25 Thermal Conductivity Meter. | Thermal Conductivity Chiller/Circulator | Thermal Conductivity |
| 202611.001 | Chiller/Circulator, 6L Reservoir, 240VACNote: For use with the DTC-25 Thermal Conductivity Meter. | Thermal Conductivity Chiller/Circulator | Thermal Conductivity |
| 202612.001 | Chiller/Circulator, 13L Reservoir, 120VACNote: For use with the DTC-300 Thermal Conductivity Meter. | Thermal Conductivity Chiller/Circulator | Thermal Conductivity |
| 202442.001 | Chiller/Circulator, 13L Reservoir, 240VACNote: For use with the DTC-300 Thermal Conductivity Meter. | Thermal Conductivity Chiller/Circulator | Thermal Conductivity |
| 854108.901 | Stack Module, Low Range, 0.0005 - 0.01 m2*K/W | Thermal Conductivity Stack Modules | Thermal Conductivity |
| 854266.901 | Stack Module, Mid Range, 0.002 - 0.02 m2*K/W | Thermal Conductivity Stack Modules | Thermal Conductivity |
| 854111.901 | Stack Module, High Range, 0.01 - 0.05 m2*K/W | Thermal Conductivity Stack Modules | Thermal Conductivity |
| 854325.901 | DTC-25/300 Low-Resistance Material Reference Set | Thermal Conductivity Reference Material Sets | Thermal Conductivity |
| 854326.901 | DTC-300 Mid-Resistance Reference Material Set | Thermal Conductivity Reference Material Sets | Thermal Conductivity |
| 854327.901 | DTC-300 High-Resistance Reference Material Set | Thermal Conductivity Reference Material Sets | Thermal Conductivity |
| 854201.901 | DTC-25/300 Vespel Reference Material Set (with data) | Thermal Conductivity Reference Material Sets | Thermal Conductivity |
| 854122.901 | Stainless Steel Reference (with data) 25.4 mm OD x 3.175 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854121.901 | Stainless Steel Reference 25.4 mm OD x 6.35 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854120.901 | Stainless Steel Reference 25.4 mm OD x 12.7 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854119.901 | Stainless Steel Reference (with data) 50.8 mm OD x 6.35 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854118.901 | Stainless Steel Reference (with data) 50.8 mm OD x 12.7 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854117.901 | Stainless Steel Reference (with data) 50.8 mm OD x 19.05 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854114.901 | Stainless Steel Reference 50.8 mm OD x 15.88 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854115.901 | Stainless Steel Reference (with data) 50.8 mm OD x 25.4 mm Thick | Thermal Conductivity Stainless Steel Reference Materials | Thermal Conductivity |
| 854130.901 | Vespel Reference (with data) 25.4 mm square x 6.35 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854126.901 | Vespel Reference (with data) 50.8 mm OD x 1.58 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854150.001 | Vespel Reference (with data) 50.8 mm OD x 2.54 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854131.901 | Vespel Reference (with data) 50.8 mm OD x 3.175 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854151.001 | Vespel Reference (with data) 50.8 mm OD x 4.76 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854129.901 | Vespel Reference (with data) 50.8 mm OD x 6.35 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854132.901 | Vespel Reference (with data) 50.8 mm OD x 9.525 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854152.001 | Vespel Reference (with data) 50.8 mm OD x 12.7 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 854153.001 | Vespel Reference (with data) 50.8 mm OD x 19.05 mm Thick | Thermal Conductivity Vespel Reference Materials | Thermal Conductivity |
| 856264.901 | Carousel Assembly, Alumina, 5-Position, 12.7 mm (1/2”), (for DLF-1600) | Parts for Discontinued Anter Xenon and Laser Flash | Thermal Conductivity |
| 853103.901 | Carousel Assembly, Graphite (for FL5000) | Parts for Discontinued Anter Xenon and Laser Flash | Thermal Conductivity |
| 853127.901 | Carousel Assembly, Graphite, 6-Position, 12.7 mm (for FL5000) | Parts for Discontinued Anter Xenon and Laser Flash | Thermal Conductivity |
| 853126.001 | Carousel Assembly, Alumina, 4-Position, 16 mm (for FL-4010) | Parts for Discontinued Anter Xenon and Laser Flash | Thermal Conductivity |
| 856305.901 | Carousel Assembly, Alumina, 6-Position, 12.7 mm (for FL-4010) | Parts for Discontinued Anter Xenon and Laser Flash | Thermal Conductivity |
| 202419.001 | Laser Coolant (1 Liter Bottle) for DLF-2 Laser ModuleNote: NOT for use with the DLF-1600. | Parts for Discontinued Anter Xenon and Laser Flash | Thermal Conductivity |
| 853133.901 | Melt Capsule, Molybdenum, 16 mm OD (for FL-4010) | Parts for Discontinued Anter Xenon and Laser Flash | Thermal Conductivity |
| 880400.901 | EPS 8" Reference Sample (NIST Based) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880400.902 | EPS 8" Reference Sample (IRMM Based) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880410.901 | EPS 12" Reference Sample (NIST Based) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880410.902 | EPS 12" Reference Sample (IRMM Based) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880411.901 | EPS 12” Specific Heat Calibration Standard | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880420.901 | EPS 24" Reference Sample (NIST Based) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880420.902 | EPS 24" Reference Sample (IRMM Based) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880430.901 | EPS 24” with Surround Insulation for 30” x 30” | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880440.901 | EPS 24” with Surround Insulation for 41” x 30” | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880460.901 | Pyrex Two Thickness Reference Standard (set of 2) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880470.901 | Perspex Two Thickness Reference Standard (set of 2) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880480.901 | Vespel Two Thickness Reference Standard (set of 2) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880510.901 | Pyroceram Two Thickness Reference Standard (set of 2) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880511.901 | Polycarbonate Two Thickness Reference Standard (set of 2) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880512.902 | NIST 1450e Reference Material (8” x 8”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880513.902 | NIST 1450e Reference Material (12” x 12”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880514.902 | NIST 1450e Reference Material (24" x 24") | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880521.901 | ERM-440 Reference Material (8” x 8”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880522.901 | ERM-440a Reference Material (12” x 12”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880523.901 | ERM-440c Reference Material (24” x 24”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880541.901 | WinTherm sw extension to 18 setpoints, for F200, F3x4, F600 | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880532.901 | Specific Heat Capacity SoftwareNote: For FOX Heat Flow Meter Instruments. | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880518.901 | FOX 50 High Temperature Liquid Cell Package | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880519.901 | Pyrex Disc, 1/8” (3 mm) ThickNote: For use with the FOX 50 Liquid Cell. | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880528.901 | FOX 50 Rubber Mat Set (2.5” diameter) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880527.901 | FOX 200 Rubber Mat Set (8” x 8”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880526.901 | FOX 314 Rubber Mat Set (12” x 12”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880525.901 | FOX 600 Rubber Mat Set (24” x 24”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880535.901 | FOX 801 Rubber Mat Set (30” x 30”) | LaserComp FOX Series - Calibration Materials, Options, and Miscellaneous Accessories | Thermal Conductivity |
| 880152.901 | Instrument Cart FOX 600 | Instrument Cart for FOX Series | Thermal Conductivity |
| 880223.901 | Instrument Cart FOX 800 | Instrument Cart for FOX Series | Thermal Conductivity |
| 855100.901 | Protection Tube, Alumina, 0.38” ID x 1.8” L | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855101.901 | Protection Capsule, 0.38” ID x 2.0” L | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855114.001 | Protection Plate, Alumina, 4.6 mm OD | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855113.001 | Protection Plate, Alumina, 6.35 mm OD | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855115.001 | Protection Plate, Alumina, 12.7 mm OD | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855103.001 | Protection Plate, Alumina, 12.7 mm Square | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855116.901 | Dilatometer Tube, Alumina, DVD-1650 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855106.901 | Dilatometer Tube, Quartz, DHD-1000 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855107.901 | Dilatometer Tube, Quartz, Unitherm 1101 Standard Tube | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855108.901 | Dilatometer Tube, Quartz, Unitherm 1101 Extra Large Tube | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855111.901 | Dilatometer Tube, Quartz, Extended, Unitherm 1101 Cyrogenic Dewar | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855123.901 | Dilatometer Tube, Graphite, with shield, DVD-2800 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855102.001 | Spacer Rod, Alumina | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855105.901 | Specimen Holder, Quartz, DHD-300 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855112.901 | Reference Holder, Graphite | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855117.001 | Dilatometer Platform, Alumina, DVD-1650 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855118.901 | Dilatometer Push Rod, Alumina, Standard, DVD-1650 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855122.901 | Dilatometer Push Rod, Graphite, DVD-2800 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855104.901 | Dilatometer Push Rod, Quartz, DHD-1000 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855109.901 | Dilatometer Push Rod, Quartz, 1101XL | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 117834 | Push Rod Assembly, Quartz, DHD-300 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 106966 | Push Rod Assembly, Quartz, DHD-1100 | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855128.901 | Crystallox Reference, 25.4 mm long | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855129.901 | Crystallox Reference, 50.8 mm long | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855170.001 | Aluminum Reference, 25 mm x 75 mm x 3 mmNote: For use in the DHD-300. | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855169.001 | Thermographite Reference, 50.8 mm Length | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855119.901 | Anti-Siphon Exit Exhaust Bubbler | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 855121.901 | Software, Operating, and Data Analysis | Dilatometer Parts and Accessories (DHD Instruments) | Dilatometry |
| 863160.901 | Alpha Measuring Head for DIL805 DilatometerNote: For use with the following:1. DIL805A Quenching Dilatometer (P/N: 863001.901)2. DIL805A/D Quenching and Deformation Dilatometer (P/N: 863002.901)3. DIL805A/D/T Quenching, Deformation, and Tension Dilatometer(P/N: 863003.901) | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863170.901 | Sub-Zero Module for DIL805 DilatometerNote 1: Requires Alpha Measuring Head (P/N: 863160.901).Note 2: For use with the following:1. DIL805A Quenching Dilatometer (P/N: 863001.901)2. DIL805A/D Quenching and Deformation Dilatometer (P/N: 863002.901)3. DIL805A/D/T Quenching, Deformation, and Tension Dilatometer(P/N: 863003.901) | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863180.901 | Thermocouple Placement Apparatus for DIL805Note: For use with the following:1. DIL805A Quenching Dilatometer (P/N: 863001.901)2. DIL805A/D Quenching and Deformation Dilatometer (P/N: 863002.901)3. DIL805A/D/T Quenching, Deformation, and Tension Dilatometer(P/N: 863003.901) | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863190.901 | Optical Kit - Quenching Module for DIL805Note: For use with the following:1. DIL805A Quenching Dilatometer (P/N: 863001.901)2. DIL805A/D Quenching and Deformation Dilatometer (P/N: 863002.901)3. DIL805A/D/T Quenching, Deformation, and Tension Dilatometer(P/N 863003.901) | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863220.901 | Optical Kit - Deformation Module for DIL805Note: For use with the following:1. DIL805A/D Quenching and Deformation Dilatometer (P/N: 863002.901)2. DIL805A/D/T Quenching, Deformation, and Tension Dilatometer(P/N: 863003.901) | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863230.901 | Optical Kit - Tension and Compression Module DIL805Note: For use with the DIL805A/D/T Quenching, Deformation, and Tension Dilatometer (P/N: 863003.901). | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863240.901 | Optical Kit - Alpha Measuring Head for DIL805Note: For use with the Alpha Measuring Head (P/N: 863160.901). | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863359.901 | Optical Measuring System for DIL805 | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863015.901 | Extension Unit for DIL805 | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863406.901 | Standard Reference Material Platinum(Dia. = 4 mm; Length = 10 mm) with Thermocouple for DIL805 Alpha | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863403.901 | Software - Tension and Compression Function Generator for DIL805A/D/TNote: Software for up to 10000 Strain/Force Cycles - only for DIL Deformationand Tension Mode. | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863209.901 | Software - Temperature Function Generator for DIL805ANote: Software for up to 10000 Temperature Cycles - only for QuenchingMode. | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863403.902 | Software - Temperature Function Generator for DIL805DNote: Software for up to 10,000 Temperature Cycles - only for DeformationMode with constant load. | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863394.901 | Drawer Cabinet for DIL805 only | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863381.901 | Circulating Cooler (water-to-air) for TA Instruments DIL Series | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863381.902 | Circulating Cooler (water-to-water) for TA Instruments DIL Series | DIL805 Quenching Dilatometer - Major Options | Dilatometry |
| 863343.901 | Dilatometer Measuring System DIL805A (Al2O3, Type S) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863540.901 | Dilatometer Measuring System DIL805A (Fused Silica, Type K)Note: For DIL805 up to S/N: 6925. | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863342.901 | Dilatometer Measuring System DIL805A (Fused Silica, Type S) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863344.901 | Dilatometer Measuring System DIL805D (Al2O3, Type S) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863345.901 | Dilatometer Measuring System DIL805D (Fused Silica, Type S) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863341.901 | Dilatometer Measuring System DIL805T Tension and Compression(Type S) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863340.901 | Dilatometer Measuring System Alpha Measuring Head (Al2O3, Type S) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863401.901 | Dilatometer Measuring System Alpha Measuring Head (Fused Silica,Type K) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863339.901 | Dilatometer Measuring System Alpha Measuring Head (Fused Silica,Type S) | DIL805 Quenching Dilatometer - System Components - Measuring Systems | Dilatometry |
| 863426.002 | Transmission Rod Solid Al2O3 (Dia. = 4 mm, Length = 133.5 mm)Note: For a DIL805. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863497.002 | Transmission Rod Solid Fused Silica (Dia. = 3 mm, Length = 133.5 mm)Note: For a DIL805. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863266.001 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 100.5 mm)Note: For a DIL805T. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863265.001 | Transmission Rod Fused Silica (Dia. = 4 mm; Length = 100.5 mm)Note: For a DIL805T. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863420.003 | Transmission Rod Fused Silica (Length = 113.5 mm)Note: For a DIL805. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863420.002 | Transmission Rod Fused Silica (Dia. = 4 mm; Length = 123.5 mm)Note: For a DIL805. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863420.004 | Transmission Rod Fused Silica (Dia. = 4 mm; Length = 118.5 mm)Note: For a DIL805. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863421.001 | Transmission Rod Fused Silica (Dia. = 3 mm; Length = 163.5 mm)Note: For a DIL805A/805L. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863414.001 | Transmission Rod with hole for gas Fused Silica (Dia. = 4 mm; Length = 145 mm)Note: For a DIL805 Alpha. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863414.002 | Transmission Rod with hole for Fused Silica (Dia. = 4 mm; Length = 130 mm)Note: For a DIL805 Alpha. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863426.001 | Transmission Rod with hole for gas Al2O3 (Dia. = 4 mm; Length = 133.5 mm)Note: For a DIL805A/805L. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863420.001 | Transmission Rod with hole for gas Fused Silica (Dia. = 4 mm; Length = 133.5 mm)Note: For a DIL805A/805L. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863427.001 | Transmission Rod Al2O3 (Dia. = 3 mm; Length = 163.5 mm)Note: For a DIL805A/805L. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863262.001 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 145 mm)Note: For a DIL805 Alpha. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863497.001 | Transmission Rod Solid Fused Silica (Dia. = 2 mm; Length = 133.5 mm)Note: For a DIL805A/805L. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863560.901 | Transmission Rod Solid Fused Silica (Dia. = 2 mm, Length = 145 mm)Note: For a DIL805 Alpha. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863560.902 | Transmission Rod Solid Fused Silica (Dia. = 3 mm, Length = 145 mm)Note: For a DIL805 Alpha. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863505.001 | Transmission Rod Solid Fused Silica (Dia. = 2 mm; Length = 126.5 mm)Note: For DIL805A S/N: 4013. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863525.001 | Transmission Rod Solid Fused Silica (Dia. = 2 mm; Length = 138 mm)Note: For DIL805A S/N: 4013. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863541.001 | Transmission Rod Fused Silica (Dia. = 4 mm; Length = 133.5 mm)Note: For DIL805A instruments up to S/N: 6925. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863542.001 | Transmission Rod Fused Silica (Dia. = 4 mm; Length = 163.5 mm)Note: For DIL805A instruments up to S/N: 6925. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863396.001 | Heating Ring MoNote: For a DIL805A. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863397.001 | Heating Ring PtNote: For a DIL805A. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863261.001 | Molybdenum Disk (Dia. = 8 mm; Thickness = 0.1 mm)Note: For a DIL805D. | DIL805 Quenching Dilatometer - System Components - Transmission Rods | Dilatometry |
| 863600.901 | Clamping Device for Flat Samples for DIL805T | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863267.001 | Spacer Ring (for 9 mm tension tests) for DIL805T | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863251.901 | Flat Sample Clamping for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863252.901 | Clamping Jaws for Flat Sample Clamping for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863253.901 | Toolkit for Flat Sample Clamping for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863503.001 | Sample Support (M7) Right for DIL805T | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863504.001 | Sample Support (M7) Left for DIL805T | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863428.002 | Opposite Support Solid Al2O3 (Dia. = 4 mm) for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863496.002 | Opposite Support Solid Fused Silica (Dia. = 3 mm) for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863263.001 | Opposite Support Al2O3 (Length = 64 mm; OD = 4 mm) for DIL805 Alpha | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863446.001 | Opposite Support Fused Silica (Length = 64 mm; OD = 4 mm) for DIL805Alpha | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863446.003 | Opposite Support Fused Silica (Length = 34 mm; OD = 4 mm) for DIL805 Alpha | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863413.001 | Holder for Opposite Support Fused Silica (including compression springand clamping bar) for DIL805 Alpha | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863561.001 | Opposite Support Solid Fused Silica (Dia. = 2 mm, Length = 64 mm) forDIL805 Alpha | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863561.002 | Opposite Support Solid Fused Silica (Dia. = 3 mm, Length = 64 mm) forDIL805 Alpha | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863446.002 | Opposite Support (Dia. = 4 mm; Shifted 7 mm) for DIL805 Alpha Optical | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863422.003 | Opposite Support Fused Silica (Length = 55.5 mm) for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863422.002 | Opposite Support Fused Silica (Length = 65.5 mm) for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863422.004 | Opposite Support Fused Silica (Length = 60.5 mm) for DIL805 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863428.001 | Opposite Support Al2O3 (Dia. = 4 mm) for DIL805A/805L | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863422.001 | Opposite Support Fused Silica (Dia. = 4 mm) for DIL805A/805L | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863415.001 | Opposite Support with Hose Connection Fused Silica(OD = 4 mm; Length = 64 mm) for DIL805 Sub-Zero | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863543.001 | Opposite Support with Hose Connection Fused Silica(Dia. = 4 mm; Length = 63.5 mm) for DIL805A Sub-Zero instruments up toS/N: 6925 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863496.001 | Opposite Support Solid Fused Silica (Dia. = 2 mm) for DIL805A | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863506.001 | Opposite Support Fused Silica (Dia. = 8 mm) for DIL805A instrumentS/N: 4013 | DIL805 Quenching Dilatometer - System Components - Sample Supports | Dilatometry |
| 863306.901 | Induction Coil for DIL805(Dia. = 16 mm; Height = 82 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863306.902 | Induction Coil for DIL805(Dia. = 16 mm; Height = 82 mm; Length = 50 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863306.903 | Induction Coil for DIL805(Dia. = 16-20-16 mm; Height = 82 mm; Length = 50 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863303.901 | Induction Coil for DIL805HR(Dia. = 20 mm; Height = 82 mm; Length = 35 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863302.901 | Induction Coil for DIL805T(Dia. = 20 mm; Height = 82 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863295.901 | Induction Coil for Flat Samples for DIL805T(Dia. = 38 mm; Height = 61 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863299.901 | Induction Coil for Flat Samples for DIL805T(Dia. = 27 mm; Height = 79 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863498.901 | Induction Coil for DIL805A Teflon(Dia. = 7 mm; Height = 82 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863559.901 | Gas Connecton Kit for SZ-Tests with Teflon Coil, DIL805 | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863530.001 | Induction Coil for DIL805DSC(Dia. = 22 mm; Height = 82 mm; Length = 50 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863531.001 | Induction Coil for DIL805A Optic(Dia. = 16 mm; Height = 82 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863532.001 | Induction Coil for DIL805D Optic(Dia. = 16 mm; Height = 82 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863533.001 | Induction Coil for DIL805T Optic(Dia. = 20 mm; Height = 82 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863534.001 | Induction Coil for DIL805 Alpha Optic(Dia. = 16 mm; Height = 75 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863536.003 | Induction Coil for DIL805T(Dia. = 20 mm; Height = 67 mm; Length = 16 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863536.002 | Induction Coil for DIL805T(Dia. = 20 mm; Height = 67 mm; Length = 60 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863302.903 | Induction Coil for DIL805T(Dia. = 20 mm; Height = 82 mm; Length = 16 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863302.902 | Induction Coil for DIL805T(Dia. = 26 mm; Height = 82 mm; Length = 30 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863535.001 | Induction Coil for DIL805(Dia. = 16 mm; Height = 67 mm; Length = 30 mm) for DIL805 instrumentsup to S/N: 6925 | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863537.001 | Induction Coil for DIL805A Teflon(Dia. = 7 mm; Height = 67 mm; Length = 30 mm) for DIL805A instrumentsup to S/N: 6925 | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863539.001 | Induction Coil for DIL805DSC(Dia. = 22 mm; Height = 90 mm; Length = 50 mm) for DIL805DSCinstruments up to S/N: 6925 | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863538.001 | Induction Coil for DIL805HR(Dia. = 20 mm; Height = 67 mm; Length = 35 mm) for DIL805HRinstruments up to S/N: 6925 | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863536.001 | Induction Coil for DIL805T(Dia. = 20 mm; Height = 67 mm; Length = 30 mm) for DIL805T instrumentsup to S/N: 6925 | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 863803.901 | Induction Coil for TTS820(Dia. = 35 mm; Length = 72 mm; 8 windings; A = 4x4 rectangular copperwire 4x4 mm) | DIL805 Quenching Dilatometer - System Components - Induction Coils | Dilatometry |
| 202585.001 | Deformation Punch Left Al2O3 | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 202584.001 | Deformation Punch Right Al2O3 | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 202586.001 | Deformation Punch Left Fused Silica | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 863432.001 | Deformation Punch Right Fused Silica | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 202703.001 | Deformation Punch Left Si3Ni4 | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 202702.001 | Deformation Punch Right Si3Ni4 | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 863612.001 | Deformation Punch Left - Steel | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 863613.001 | Deformation Punch Right - Steel | DIL805 Quenching Dilatometer - System Components - Deformation Punches | Dilatometry |
| 863572.001 | Protection Window Fused Silica (44 x 12 x 2 mm) for DIL805, DIL806, andSTD812 | DIL805 Quenching Dilatometer - System Components - Optical Kit Spare Parts | Dilatometry |
| 863573.001 | Protection Window Fused Silica (35 x 16 x 2 mm) for DIL805 and STD812 | DIL805 Quenching Dilatometer - System Components - Optical Kit Spare Parts | Dilatometry |
| 863393.001 | Gas Supply Module | DIL80X Series Dilatometers - System Components - Optional Accessories | Dilatometry |
| 863386.001 | Vacuum Unit for 10-2 mbar | DIL80X Series Dilatometers - System Components - Optional Accessories | Dilatometry |
| 863391.001 | Water Supply Module | DIL80X Series Dilatometers - System Components - Optional Accessories | Dilatometry |
| 863381.901 | Circulating Cooler (water-to-air) for TA Instruments DIL Series | DIL80X Series Dilatometers - System Components - Optional Accessories | Dilatometry |
| 863377.902 | Dewar for LN2 (0.5 bar) 100 Liter | DIL80X Series Dilatometers - System Components - Optional Accessories | Dilatometry |
| 863382.904 | Dilatometer Reference Material Borosilicate Glass (10 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863382.903 | Dilatometer Reference Material Borosilicate Glass (20 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863382.902 | Dilatometer Reference Material Borosilicate Glass (25 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863586.004 | Dilatometer Reference Material Platinum(Dia. = 3 mm; Length = 10 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863586.003 | Dilatometer Reference Material Platinum(Dia. = 3 mm; Length = 20 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863586.002 | Dilatometer Reference Material Platinum(Dia. = 3 mm; Length = 25 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863586.001 | Dilatometer Reference Material Platinum(Dia. = 3 mm; Length = 50 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863382.901 | Dilatometer Reference Material Borosilicate Glass(6.4 mm Square; Length = 50 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863585.001 | Dilatometer Reference Material Fused Silica(Dia. = 5 mm; Length = 10 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863585.002 | Dilatometer Reference Material Fused Silica(Dia. = 5 mm; Length = 20 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863585.003 | Dilatometer Reference Material Fused Silica(Dia. = 5 mm; Length = 25 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863585.004 | Dilatometer Reference Material Fused Silica(Dia. = 5 mm; Length = 50 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863275.001 | Dilatometer Reference Material Sapphire(Dia. = 5 mm; Length = 10 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863275.004 | Dilatometer Reference Material Sapphire(Dia. = 5 mm; Length = 20 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863275.002 | Dilatometer Reference Material Sapphire(Dia. = 5 mm; Length = 25 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863275.003 | Dilatometer Reference Material Fused Silica(Dia. = 5 mm; Length = 50 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863409.901 | Dilatometer Reference Material Sapphire(Dia. = 5 mm; Length = 50 mm) | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863637.901 | Inert Samples, Fused Silica(Length = 10, 20, 25, 50 mm) for DIL802/DIL802L/DIL803/DIL803L only | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863638.901 | Inert Samples, Al2O3(Length = 10, 20, 25, 50 mm) for DIL802/DIL802L/DIL803/DIL802L only | DIL80X Series Dilatometers - System Components - Reference Materials | Dilatometry |
| 863376.901 | Furnace -160 °C up to 700 °C for DIL 80x | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863690.901 | Furnace 1000 °C Water Cooled (with fan) for DIL 80x and DIL 80xLModels | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863366.901 | Furnace 1350 °C for DIL 80x and DIL 80xL Models | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863366.902 | Furnace 1350 °C for DIL 80x and DIL 80xL Models (up to S/N: 5144) | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863367.901 | Furnace 1500 °C Water Cooled for DIL 80x and DIL 80xL Models | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863368.901 | Furnace Max. 1700 °C for DIL 80x and DIL 80xL Models | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863436.901 | Transformer for Sub-Zero Furnace DIL/STA | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863437.901 | Transformer for Furnace 1350 °C DIL | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863438.901 | Transformer for Furnace 1500 °C DIL and Furnace 1000 °C Water Cooled | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863439.901 | Transformer for Furnace 1700 °C DIL | DIL80X Series Dilatometers - System Components - Furnaces | Dilatometry |
| 863329.901 | Dilatometer Measuring System DIL801 (Al2O3, Type B) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863328.901 | Dilatometer Measuring System DIL801 (Al2O3, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863326.901 | Dilatometer Measuring System DIL801 (Fused Silica, Type K) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863327.901 | Dilatometer Measuring System DIL801 (Fused Silica, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863333.901 | Dilatometer Measuring System DIL802 (Al2O3, Type B) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863332.901 | Dilatometer Measuring System DIL802 (Al2O3, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863330.901 | Dilatometer Measuring System DIL802 (Fused Silica, Type K) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863331.901 | Dilatometer Measuring System DIL802 (Fused Silica, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863338.901 | Dilatometer Measuring System DIL803 (Al2O3, Type B) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863337.901 | Dilatometer Measuring System DIL803 (Al2O3, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863335.901 | Dilatometer Measuring System DIL803 (Fused Silica, Type K) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863336.901 | Dilatometer Measuring System DIL803 (Fused Silica, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863317.901 | Dilatometer Measuring System DIL801L (Al2O3, Type B) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863322.901 | Dilatometer Measuring System DIL801L (Al2O3, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863630.901 | Dilatometer Measuring System DIL801L (Al2O3, Type S)(Diameter = 11 mm; Length = 275 mm) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863320.901 | Dilatometer Measuring System DIL801L (Fused Silica, Type K) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863321.901 | Dilatometer Measuring System DIL801L (Fused Silica, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863640.901 | Dilatometer Measuring System DIL801L (Fused Silica, Type S) HDR(Diameter = 11.6 mm), Rod (Diameter = 7 mm) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863641.901 | Dilatometer Measuring System DIL801L (Fused Silica, Type S) HDR(Diameter = 16 mm), Rod (Diameter = 10 mm) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863642.901 | Dilatometer Measuring System DIL801L (Fused Silica, Type S) HDR(Diameter = 25 mm), Rod (Diameter = 15 mm) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863318.901 | Dilatometer Measuring System DIL802L (Al2O3, Type B) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863325.901 | Dilatometer Measuring System DIL802L (Al2O3, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863323.901 | Dilatometer Measuring System DIL802L (Fused Silica, Type K) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863324.901 | Dilatometer Measuring System DIL802L (Fused Silica, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863319.901 | Dilatometer Measuring System DIL803L (Al2O3, Type B) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863316.901 | Dilatometer Measuring System DIL803L (Al2O3, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863526.001 | Dilatometer Measuring System DIL803L (Al2O3) (Diameter = 20 mm) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863314.901 | Dilatometer Measuring System DIL803L (Fused Silica, Type K) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863315.901 | Dilatometer Measuring System DIL803L (Fused Silica, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863629.901 | Dilatometer Measuring System DIL801L/DIL804 (Fused Silica, Type S) | DIL80X Series Dilatometers - System Components - Measuring Systems | Dilatometry |
| 863349.001 | Dilatometer Protection Tube Al2O3(Diameter = 28 mm; Length = 304 mm) for DIL801/802/803 | DIL80X Series Dilatometers - System Components - Protection Tubes | Dilatometry |
| 863348.001 | Dilatometer Protection Tube Fused Silica(Diameter = 31 mm; Length = 309 mm) for DIL801/802/803 | DIL80X Series Dilatometers - System Components - Protection Tubes | Dilatometry |
| 863350.001 | Dilatometer Protection Tube Al2O3(Diameter = 21 mm; Length = 296 mm) for Furnace (P/N: 863368.901) | DIL80X Series Dilatometers - System Components - Protection Tubes | Dilatometry |
| 863463.001 | Convection-Protection Tube Fused Silica for DIL801L/802L/803L | DIL80X Series Dilatometers - System Components - Protection Tubes | Dilatometry |
| 863507.001 | Protection Tube Al2O3(ID = 28 mm; Length = 354 mm) for DIL801/802/803 | DIL80X Series Dilatometers - System Components - Protection Tubes | Dilatometry |
| 863632.901 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 270 mm) for DIL801L | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863500.001 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 282.5 mm) for DIL801L | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863464.001 | Transmission Rod Al2O3(Dia. = 4 mm; Length = 345 mm) for DIL801L/802L/803L | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863455.001 | Transmission Rod Al2O3(Dia. = 4 mm; Length = 384 mm) for DIL801/802/803 | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863277.001 | Transmission Rod Fused Silica(Dia. = 4 mm; Length = 384 mm) for DIL801/802/803 | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863276.001 | Transmission Rod Fused Silica(Dia. = 4 mm; Length = 345 mm) for DIL801L/802L/803L | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863460.001 | Transmission Rod Glassy Carbon(Dia. = 4 mm; Length = 384 mm) for DIL801/802 | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863461.001 | Transmission Rod Glassy Carbon(Dia. = 4 mm: Length = 367 mm) for DIL802 only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863285.001 | Transmission Rod Al2O3 (Dia. = 3 mm; Length = 367 mm) for DIL802 only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863286.001 | Transmission Rod Al2O3 (Dia. = 3 mm; Length = 384 mm) for DIL802 only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863458.001 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 367 mm) for DIL802 only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863466.001 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 328 mm) for DIL802L only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863476.901 | Transmission Rod Fused Silica (Length = 297.5 mm) for DIL801L | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863465.001 | Transmission Rod Fused Silica(Dia. = 4 mm; Length = 328 mm) for DIL802L only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863449.001 | Transmission Rod Fused Silica(Dia. = 4 mm; Length = 367 mm) for DIL802 only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863636.901 | Transmission Rod Fused Silica(Dia. = 4 mm; Length = 384 mm) with End Plate for DIL801 only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863278.001 | Transmission Rod Fused Silica Penetration(Dia. = 1 mm; Length = 345 mm) for DIL801 only | DIL80X Series Dilatometers - System Components - Transmission Rods | Dilatometry |
| 863631.901 | Sample Holder Al2O3(Dia. = 11 mm; Length = 275 mm) for DIL801L | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863454.001 | Sample Holder Al2O3(ID = 14 mm; Length = 350 mm) for DIL80X instruments | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863527.001 | Sample Holder Al2O3(ID = 20 mm; Length = 350 mm) for DIL80X instruments | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863475.901 | Sample Holder Fused Silica (Length = 262.5 mm) for DIL801L | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863274.001 | Sample Holder Fused Silica(ID = 16 mm; Length = 350 mm) for DIL80X instruments | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863274.002 | Sample Holder Fused Silica(Dia. = 11 mm; Length = 350 mm) for DIL801/801L | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863557.901 | Sample Holder Fused Silica(Dia. = 14 mm; Length = 350 mm) for DIL80X instruments | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863556.901 | Sample Holder Fused Silica(Dia. = 25 mm; Length = 350 mm) for DIL80X instruments | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863284.001 | Sample Holder Al2O3 with Slot for Thermocouple(ID = 12 mm; Length = 350 mm) for DIL801/802 | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863553.001 | Sample Holder Al2O3 with Slot for Thermocouple(Dia. = 14 mm; Length = 350 mm) for DIL801/802/803 | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863558.001 | Sample Support for Fused Silica Sample Holder (ID = 14 mm) | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863273.001 | Sample Support for Fused Silica Sample Holder (ID = 16 mm) for roundsamples up to 6 mm diameter | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863508.001 | Sample Support for Fused Silica Sample Holder (ID = 16 mm) for squaresamples 4 mm on edge | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863457.001 | Sample Support for Al2O3 Sample Holder (ID = 12 mm) for roundsamples up to 4.5 mm diameter | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863529.001 | Sample Support for Al2O3 Sample Holder (ID = 20 mm) for roundsamples up to 8 mm diameter | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863634.001 | End Plate for Al2O3 Sample Holder (Dia. = 11 mm) for DIL801L | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863290.001 | End Plate for Al2O3 Sample Holder (Dia. = 12 mm) for DIL801/802 | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863456.001 | End Plate for Al2O3 Sample Holder (Dia. = 14 mm) | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863528.001 | End Plate for Al2O3 Sample Holder (ID = 20 mm) | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863291.001 | Container for Measurement of Pastes and Powders in Horizontal DIL80X,Al2O3 | DIL80X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863570.001 | Protection Disc Al2O3 (Dia. = 5 mm) for DIL80X, DIL 80xL, DIL 820 andDIL 830 Series | DIL80X Series Dilatometers - System Components - Protection Discs | Dilatometry |
| 863493.001 | Protection Disc Al2O3 (Dia. = 6 mm) for DIL80X, DIL 80xL, DIL 820 andDIL 830 Series | DIL80X Series Dilatometers - System Components - Protection Discs | Dilatometry |
| 863570.002 | Protection Disc Al2O3 (Dia. = 10 mm) for DIL80X, DIL 80xL, DIL 820 andDIL 830 Series | DIL80X Series Dilatometers - System Components - Protection Discs | Dilatometry |
| 863570.003 | Protection Disc Al2O3 (Dia. = 12 mm) for DIL80X, DIL 80xL, DIL 820 andDIL 830 Series | DIL80X Series Dilatometers - System Components - Protection Discs | Dilatometry |
| 863571.001 | Protection Disk Fused Silica (Dia. = 6 mm) for DIL80X, DIL 80xL, DIL 820and DIL 830 Series | DIL80X Series Dilatometers - System Components - Protection Discs | Dilatometry |
| 863571.002 | Protection Disk Fused Silica (Dia. = 10 mm) for DIL80X, DIL 80xL, DIL 820and DIL 830 Series | DIL80X Series Dilatometers - System Components - Protection Discs | Dilatometry |
| 863571.003 | Protection Disk Fused Silica (Dia. = 12 mm) for DIL80X, DIL 80xL, DIL 820and DIL 830 Series | DIL80X Series Dilatometers - System Components - Protection Discs | Dilatometry |
| 863733.901 | Dilatometer Measuring System DIL821 (Al2O3, Type B) | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863732.901 | Dilatometer Measuring System DIL821 (Al2O3, Type S) | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863731.901 | Dilatometer Measuring System DIL821 (Fused Silica, Type S) | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863743.901 | Dilatometer Measuring System DIL822 (Al2O3, Type B) | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863742.901 | Dilatometer Measuring System DIL822 (Al2O3, Type S) | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863741.901 | Dilatometer Measuring System DIL822 (Fused Silica, Type S) | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863740.901 | Dilatometer Measuring System DIL822/DIL832 (Fused Silica, Type K) | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863763.901 | Sample Holder Al2O3 Type B for DIL821/822 | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863762.901 | Sample Holder Al2O3 Type S for DIL821/822 | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863761.901 | Sample Holder Fused Silica Type S for DIL821/822 | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863760.901 | Sample Holder Fused Silica Type K for DIL821/822 | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863752.901 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 294 mm) for DIL821/822 | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863751.901 | Transmission Rod Fused Silica (Dia. = 4 mm; Length = 294 mm) forDIL821/822 | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863766.901 | Oxygen Trap for DIL82x | DIL821 and DIL822 Vertical Dilatometer - System Components | Dilatometry |
| 863770.901 | Dilatometer Measuring System DIL821HT (Al2O3, Type B) 1700 °C | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863771.901 | Dilatometer Measuring System DIL821HT (Graphite, Type C) 2000 °C | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863772.901 | Dilatometer Measuring System DIL821HT (Graphite) 2300 °C | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863780.901 | Dilatometer Measuring System DIL822HT (Al2O3, Type B) 1700 °C | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863781.901 | Dilatometer Measuring System DIL822HT (Graphite, Type C) 2000 °C | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863782.901 | Dilatometer Measuring System DIL822HT (Graphite) 2300 °C | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863785.901 | Transmission Rod Al2O3 (Dia. = 4 mm; Length = 326 mm) forDIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863786.901 | Transmission Rod Glassy Carbon (Dia. = 4 mm; Length = 326 mm) forDIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863790.901 | Sample Holder Al2O3 Type B for DIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863791.901 | Sample Holder Graphite Type C for DIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863792.901 | Sample Holder Graphite for DIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863793.001 | End Plate for Graphite Sample Holder (Dia. = 14 mm) for DIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863795.901 | Protection Tube Al2O3 for DIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863796.901 | Protection Tube Glassy Carbon for DIL821HT/822HT | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863381.903 | Circulating Cooler for DIL82XHT High Temperature Vertical Dilatometer | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863381.913 | Circulating Cooler for DIL82XHT and VIS413 - UL and CSA Certified Version | DIL821HT and DIL822HT High Temperature Vertical Dilatometer - System Components | Dilatometry |
| 863753.001 | Sample Support for Round Samples up to 6mm dia, FS, for DIL832 Sample Holder (ID=16mm) | DIL83X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 863754.001 | Sample Support for Round Samples up to 5mm dia, Al2O3, for DIL832 Sample Holder (ID=14mm) | DIL83X Series Dilatometers - System Components - Sample Holders and End Plates | Dilatometry |
| 870802.901 | M3 L-Series 1400 °C Furnace, 30 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870804.901 | M3 H-Series 1400 °C Furnace, 80 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870807.901 | M3 H-Series 1600 °C Furnace, 50 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 871811.901 | 86X Series 1650 °C Furnace, 100 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870801.902 | M3 H-Series 1200 °C Furnace, 80 °C/min, with Gas option | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870803.902 | M3 H-Series 1400 °C Furnace, 50 °C/min, with Gas option | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870803.903 | M3 H-Series 1400 °C Furnace, 50 °C/min, Gas+Flash options | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870804.902 | M3 H-Series 1400 °C Furnace, 80 °C/min, with Gas option | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870804.903 | M3 H-Series 1400 °C Furnace, 80 °C/min, Gas+Flash options | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870807.903 | M3 H-Series 1600 °C Furnace, 50 °C/min, Gas+Flash options | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870807.902 | M3 H-Series 1600 °C Furnace, 50 °C/min, with Gas option | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870808.902 | M3 H-Series 1600 °C Furnace, 80 °C/min, with Gas option | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870808.903 | M3 H-Series 1600 °C Furnace, 80 °C/min, Gas+Flash options | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870800.901 | M3 L-Series 1200 °C Furnace, 30 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870801.901 | M3 H-Series 1200 °C Furnace, 80 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870803.901 | M3 H-Series 1400 °C Furnace, 50 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870806.901 | M3 L-Series 1600 °C Furnace, 30 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 870808.901 | M3 H-Series 1600 °C Furnace, 80 °C/min | DIL806, Misura 3, 860 Series - System Components - Furnaces | Dilatometry |
| 863580.001 | Standard Reference Material Borosilicate Glass (Dia. = 10 mm) for DIL806 only | DIL806 - System Components - Reference Materials | Dilatometry |
| 863405.901 | Standard Reference Material Fused Silica (Dia. = 10 mm) for DIL806 only | DIL806 - System Components - Reference Materials | Dilatometry |
| 863405.902 | Standard Reference Material Fused Silica (Dia. = 20 mm) for DIL806 only | DIL806 - System Components - Reference Materials | Dilatometry |
| 863407.901 | Standard Reference Material Sapphire (Dia. = 10 mm) for DIL806 only | DIL806 - System Components - Reference Materials | Dilatometry |
| 863407.902 | Standard Reference Material Sapphire (Dia. = 20 mm) for DIL806 only | DIL806 - System Components - Reference Materials | Dilatometry |
| 863471.001 | Sample Platform Al2O3 (21 x 11 x 2 mm) for DIL806 only | DIL806 - Parts and Consumables | Dilatometry |
| 863467.001 | Sample Platform Fused Silica (21 x 11 x 2 mm) for DIL806 only | DIL806 - Parts and Consumables | Dilatometry |
| 863620.901 | Thin Film Holder for DIL806 and ODP 868 | DIL806 - Parts and Consumables | Dilatometry |
| 863353.001 | Dilatometer Measuring System DIL806 (Al2O3, Type S) | DIL806 - Parts and Consumables | Dilatometry |
| 863351.001 | Dilatometer Measuring System DIL806 (Fused Silica, Type K) | DIL806 - Parts and Consumables | Dilatometry |
| 863352.001 | Dilatometer Measuring System DIL806 (Fused Silica, Type S) | DIL806 - Parts and Consumables | Dilatometry |
| 863468.001 | Fused Silica Supporting Rod for Dilatometer Measuring System(P/N: 863351.001 and P/N: 863352.001) (Dia. = 2 mm) for DIL806 only | DIL806 - Parts and Consumables | Dilatometry |
| 863472.001 | Al2O3 Rod for Dilatometer Measuring System (P/N: 863353.001)(Dia. = 2 mm) for DIL806 only | DIL806 - Parts and Consumables | Dilatometry |
| 863572.001 | Protection Window Fused Silica (44 x 12 x 2 mm) for DIL805, DIL806, andSTD812 | DIL806 - Parts and Consumables | Dilatometry |
| 871042.901 | ODP 868/HM 867 Instantaneous Heating System (Flash Mode) | ODP 868 and HM 867 System Components - Options | Dilatometry |
| 871050.901 | ODP 868 Upgrade from 1 to 2 Operational Modes | ODP 868 and HM 867 System Components - Options | Dilatometry |
| 871051.901 | ODP 868 Upgrade from 1 to 3 Operational Modes | ODP 868 and HM 867 System Components - Options | Dilatometry |
| 871052.901 | ODP 868 Upgrade from 2 to 3 Operational Modes | ODP 868 and HM 867 System Components - Options | Dilatometry |
| 871320.901 | Optical Dilatometer Reference Material Sapphire (Length = 50 mm) | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871160.901 | Thin Film Sample Holder, Al2O3, ODP868 | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871090.901 | ODP 868/HM 867 Starting Kit Extension for HM Mode | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871091.901 | ODP 868 Starting Kit Extension for OD Mode | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871092.901 | ODP 868 Starting Kit Extension for Flex Mode | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871100.901 | 150X Sample Holding Plates, 10 x 8 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871104.901 | 150X Sample Holding Plates, 15 x 15 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871103.901 | 150X Sample Holding Plates, 18 x 8 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871101.901 | 30X Sample Holding Plates, 60 x 8 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871102.901 | 5X Sample Holding Plates, 80 x 8 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871112.901 | 5X Sample Holding Plates, Al2O3, 80 x 10 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871110.901 | Sample Support for Flex, OD = 5 mm, ID = 4 mm. L = 10 mm, Al2O3, ODP 868, pkg. of 10 | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871150.901 | 2X Sample Holding Rod, (Diameter = 3 x 145 mm) | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871151.901 | 2X Sample Hold. Rod With Holes, (Diameter = 3 x 130 mm) | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871250.001 | Shaped Quartz Glass Op. Sheet, 65 x 40 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871251.001 | Quartz Glass Op. Sheet, 84 x 38 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871252.001 | Quartz Glass Op. Sheet Diffu. 84 x 38 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871305.001 | Al2O3 Rod (Diameter = 3 x 85 mm), for Flex Correction | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871310.901 | Shaped Au Wire 3 mm Mp 1064 °C | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871311.901 | Shaped Pd Wire 3 mm Mp 1554 °C | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871350.901 | Handle Punch for (Diameter = 2 x 3 mm), and (Diameter = 3 x 3 mm) | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871360.001 | Pneumatic Press To Realize Specimens | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871362.001 | Die For 5 x 5 x 50 mm Samples | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871380.001 | Electric Cutter, 230V, 50Hz, incl. One Blade | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871380.002 | Electric Cutter, 110V, 60Hz, incl. One Blade | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871380.003 | Electric Cutter, 115V, 50Hz, incl. One Blade | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871390.001 | Turbo Blade for Electrical Cutter: Dia. = 115 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 871200.901 | Sample Thermocouple Type S, L = 110 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870150.901 | Sample Holding Rod, (Diameter = 3.18 x 210 mm) for M3 | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870200.901 | Sample Holding Rod (Diameter = 3.18 x 210 mm) including TC S for M3 | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870152.901 | Sample Holding Rod (Diameter = 3.18 x 195 mm) | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870153.901 | Sample Holding Rod (Diameter = 3.18 x 230 mm) | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870300.001 | Halogen Brill 50W GU5.3 12V for M3 | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870250.001 | Quarz Disc (Diameter = 48 mm) | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870251.001 | Quarz Disc (Diameter = 48 mm) with Holes | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 870252.001 | Quarz Disc 38 x 18 x 1 mm | Misura3, ODP 868 and HM 867 System Components - Parts and Consumables | Dilatometry |
| 862110.901 | Vacuum Unit for 10**-2 mbar for VIS413 | VIS 413 Rotational Viscometer Instruments - System Components - Optional Accessories | Dilatometry |
| 862550.001 | Viscometer Rotor, OD=12 mm, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862551.001 | Viscometer Rotor, OD=16 mm, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862553.901 | Viscometer Rotor, OD=9 mm, PtRh, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862541.901 | Viscometer Adapter for PtRh Crucible, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862554.901 | Viscometer Rotor, OD=19 mm, PtRh, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862560.901 | Viscometer Rotor Spindle for Al2O3-Rotor, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862564.901 | Viscometer Rotor Spindle for PtRh-Rotor, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862565.901 | Viscometer Rotor Anti-Twist Pin, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862530.001 | Viscometer Crucible, OD=35 mm, H=65 mm, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862916.001 | Viscometer Crucible, D=23 mm, H=55 mm, PtAu 1500°C, VIS 413 and VIS 403 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862916.002 | Viscometer Crucible, D=23 mm, H=65 mm, PtAu 1500°C, VIS 413 and VIS 403 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862911.001 | Viscometer Crucible, D=23 mm, H=55 mm, PtRh 1750°C, VIS 413 and VIS 403HF | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862540.901 | Viscometer Crucible Holding Rod, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862542.001 | Viscometer Locking Ring for Crucible Holding Rods, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862533.901 | Viscometer Crucible Anti-Twist Device, PtRh, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862506.901 | Viscometer Furnace Protection Tube, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862570.901 | Viscometer Furnace Purge Gas Tube, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862572.901 | Viscometer Heat Shield Assembly, Al2O3, VIS 413 | VIS 413 Rotational Viscometer Instruments - Consumables | Dilatometry |
| 862344.901 | Viscometer Reference Material - Lime Soda Glass, 25 ml | VIS 413 Rotational Viscometer Instruments - Reference Materials | Dilatometry |
| 862345.901 | Viscometer Reference Material - Borosilicate Glass, 25 ml | VIS 413 Rotational Viscometer Instruments - Reference Materials | Dilatometry |
| 862302.901 | Induction Coil (Dia. = 40 mm; Length = 90 mm) for VIS403HF | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862912.001 | Rotor Pt-alloy (Dia. = 9 mm) for VIS403 and VIS403HF | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862912.002 | Rotor Pt-alloy (Dia. = 19 mm) for VIS403 and VIS403HF | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862916.001 | Viscometer Crucible, D=23 mm, H=55 mm, PtAu 1500°C, VIS 413 and VIS 403 | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862916.002 | Viscometer Crucible, D=23 mm, H=65 mm, PtAu 1500°C, VIS 413 and VIS 403 | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862926.001 | Viscometer Crucible with Drip Edge, D=23 mm, H=70 mm, PtAu 1500°C, VIS 403 | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862911.001 | Viscometer Crucible, D=23 mm, H=55 mm, PtRh 1750°C, VIS 413 and VIS 403HF | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 863400.001 | Holder for Measuring Crucible without hole for VIS403 | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862915.001 | Holder for Measuring Crucible with hole for VIS403 | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862401.901 | Holder for 195 mm Measuring Crucible for VIS403HF | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862334.901 | Reference Material Lime Soda Glass for VIS403 and VIS403HF | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 862335.901 | Reference Material Borosoliciate Glass for VIS403 and VIS403HF | High Temperature Rotational Viscometer Instruments - System Components | Dilatometry |
| 336709-0010 | Tension/Compression Non-Submersible DMA Grips, Aluminum,Knurled Grip Faces, 450N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 350261-0010 | Compression Platens, 10 mm diameter, 500N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332371-0010 | Compression Platens, 25 mm diameter, 500N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332371-0020 | Compression Platens, 50 mm diameter, 500N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332372-0030 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332372-0040 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 336964-0010 | Miniature 3-Point Bend Fixture, 4 mm to 26 mm adjustable lower span,450N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 350106-0010 | Miniature 3- and 4-Point Bend Fixture, 4 mm to 26 mm adjustable lowerspan, 450N Capacity | ElectroForce 5500 Fixtures | ElectroForce Load Frame and Testbench |
| 332042-0240 | Load Sensor - 5 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0050 | Load Sensor - 22 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0140 | Load Sensor - 45 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0070 | Load Sensor - 225 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0250 | Submersible Load Sensor - 5 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0060 | Submersible Load Sensor - 22 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0160 | Submersible Load Sensor - 45 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0080 | Submersible Load Sensor - 225 Newtons, Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 332338-0010 | Pressure Sensor, 0 - 500 mmHg Measurement Range, Catheter Type,Calibration included | ElectroForce 5500 Sensors | ElectroForce Load Frame and Testbench |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for 5500 | ElectroForce 5500 Power Accessories | ElectroForce Load Frame and Testbench |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for 5500 | ElectroForce 5500 Power Accessories | ElectroForce Load Frame and Testbench |
| 752960-0010 | System Status Indicator (SSI) Light Kit | ElectroForce 5500 Other Accessories | ElectroForce Load Frame and Testbench |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce 5500 Software | ElectroForce Load Frame and Testbench |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce 5500 Software | ElectroForce Load Frame and Testbench |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/-10V high level analog input typical). Includes interface cable andproject file. | ElectroForce 5500 Software | ElectroForce Load Frame and Testbench |
| 336709-0010 | Tension/Compression Non-Submersible DMA Grips, Aluminum,Knurled Grip Faces, 450N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 350261-0010 | Compression Platens, 10 mm diameter, 500N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332371-0010 | Compression Platens, 25 mm diameter, 500N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332371-0020 | Compression Platens, 50 mm diameter, 500N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332372-0030 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332372-0040 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 336964-0010 | Miniature 3-Point Bend Fixture, 4 mm to 26 mm adjustable lower span,450N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 350106-0010 | Miniature 3- and 4-Point Bend Fixture, 4 mm to 26 mm adjustable lowerspan, 450N Capacity | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 760858-0010 | Precision Adapter Kit for RSA Geometries on ElectroForce 3200 and TestBench200/400N, SST | ElectroForce 3200 Fixtures | ElectroForce Load Frame and Testbench |
| 332042-0240 | Load Sensor - 5 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0050 | Load Sensor - 22 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0140 | Load Sensor - 45 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0070 | Load Sensor - 225 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0090 | Load Sensor - 450 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0250 | Submersible Load Sensor - 5 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0060 | Submersible Load Sensor - 22 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0160 | Submersible Load Sensor - 45 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0080 | Submersible Load Sensor - 225 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0100 | Submersible Load Sensor - 450 Newtons, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332327-0010 | Axial/Torsion Load Sensor, 450N/5.6Nm, Configured to Match InstrumentCapacity, Calibration included | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 362164-0010 | Acceleration compensation option, 100 g accelerometer, 10-32 Threads | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 362165-0010 | Acceleration compensation option, Lightweight housing, 100 gaccelerometer, 10-32 ThreadsNote: For use with load sensor of 10 Newtons or less. | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 362166-0010 | Acceleration compensation option, 100 g accelerometer, Axial/TorsionmountingNote: For use with Axial/Torsion load sensor. Compensates only for linearaccelerations. | ElectroForce 3200 Sensors | ElectroForce Load Frame and Testbench |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for any 3200 Axial-onlyInstrument | ElectroForce 3200 Power Accessories | ElectroForce Load Frame and Testbench |
| 335168-0090 | UPS 2000VA 120V, Power Failure Backup for 3200 Axial-Torsion or3200 Extended Stroke | ElectroForce 3200 Power Accessories | ElectroForce Load Frame and Testbench |
| 335168-0100 | UPS 2200VA 208V/230V, Power Failure Backup for any 3200 Instrument | ElectroForce 3200 Power Accessories | ElectroForce Load Frame and Testbench |
| 760890-0010 | Shield Accessory for ElectroForce 3200 Series III with Standard Columns | ElectroForce 3200 Other Accessories | ElectroForce Load Frame and Testbench |
| 760890-0020 | Shield Accessory for ElectroForce 3200 Series III with Extended Columns | ElectroForce 3200 Other Accessories | ElectroForce Load Frame and Testbench |
| 760872-0010 | Granite Table Assembly for ElectroForce Tabletop Instruments,36” x 36” x 35”H | ElectroForce 3200 Other Accessories | ElectroForce Load Frame and Testbench |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce 3200 Software | ElectroForce Load Frame and Testbench |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce 3200 Software | ElectroForce Load Frame and Testbench |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function (+/-10Vhigh level analog input typical). Includes interface cable and project file. | ElectroForce 3200 Software | ElectroForce Load Frame and Testbench |
| 708.01456 | RSA-G2 and DMA 3200 3-Point Bending Geometry | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 708.01446 | RSA-G2 and DMA 3200 Cantilever Bending Geometry | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 708.01455 | RSA-G2 and DMA 3200 Film/Fiber Geometry | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 708.01464 | RSA-G2 and DMA 3200 Parallel Plate Compression GeometryNote: Includes 8mm, 15mm and 25mm Dia. Plates. | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 708.01466.1 | Replacement 8 mm diameter Plates for RSA-G2 and DMA 3200 CompressionGeometry | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 708.01466.2 | Replacement 15 mm diameter Plates for RSA-G2 and DMA 3200 CompressionGeometry | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 708.01466.3 | Replacement 25 mm diameter Plates for RSA-G2 and DMA 3200 CompressionGeometry | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 708.01461 | RSA-G2 and DMA 3200 Shear Sandwich Geometry | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 332369-0010 | LSO Tension/Compression DMA Grips, Titanium, Knurled Grip Face, 500NCapacityNote: This geometry/fixture is not compatible with FCO oven. | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 332371-0010 | LSO Compression Platens, 25 mm diameter, 500N CapacityNote: This geometry/fixture is not compatible with FCO oven. | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 332372-0030 | LSO 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N CapacityNote: This geometry/fixture is not compatible with FCO oven. | ElectroForce DMA 3200 Fixtures/Geometries | ElectroForce Load Frame and Testbench |
| 332042-0050 | Load Sensor - 22 Newtons, Calibration included | ElectroForce DMA 3200 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0090 | Load Sensor - 500 Newtons, Calibration included | ElectroForce DMA 3200 Sensors | ElectroForce Load Frame and Testbench |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for DMA 3200 InstrumentNote: This is to maintain power to the base DMA 3200 Instrument, not theoven or chiller. Includes communication cable to WinTest to trigger 300sec shutdown delay upon power loss. | ElectroForce DMA 3200 Power Accessories | ElectroForce Load Frame and Testbench |
| 335168-0120 | UPS 3000VA 208/230V, Power Failure Backup for FCO or LSONote: This is to maintain power to the DMA 3200’s oven. This does notinclude maintaining the ACS chiller power. This does not communicatewith WinTest. | ElectroForce DMA 3200 Power Accessories | ElectroForce Load Frame and Testbench |
| 760872-0010 | Granite Table Assembly for ElectroForce Tabletop Instruments,36” x 36” x 35”H | ElectroForce DMA 3200 Other Accessories | ElectroForce Load Frame and Testbench |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce DMA 3200 Software | ElectroForce Load Frame and Testbench |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories,or extended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce DMA 3200 Software | ElectroForce Load Frame and Testbench |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/-10V high level analog input typical). Includes interface cableand project file. | ElectroForce DMA 3200 Software | ElectroForce Load Frame and Testbench |
| 332271-0010 | Tension/Torsion Grips, Stainless Steel, Knurled Grip Faces,3000N/50Nm Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332271-0020 | Tension/Torsion Grips, Stainless Steel, V-Cut Grip Faces(5-15 mm dia. Specimens), 3000N/50Nm Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332271-0030 | Tension/Torsion Grips, Stainless Steel, V-Cut Grip Faces(2-6 mm dia. Specimens), 3000N/50Nm Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332271-0040 | Tension/Torsion Grips, Stainless Steel, Grit Blast Grip Faces,3000N/50Nm Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332284-0010 | Additional Tension/Torsion Grip Face, Knurled FaceNote: For use with 332271-00XX Tension/Torsion Grips. | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332284-0020 | Additional Tension/Torsion Grip Face, V-Cut Grip Faces(5-15 mm dia. Specimens)Note: For use with 332271-00XX Tension/Torsion Grips. | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332284-0030 | Additional Tension/Torsion Grip Face, V-Cut Grip Faces(2-6 mm dia. Specimens)Note: For use with 332271-00XX Tension/Torsion Grips. | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332284-0040 | Additional Tension/Torsion Grip Face, Grit Blast FaceNote: For use with 332271-00XX Tension/Torsion Grips. | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 350390-0010 | Tension/Compression Wedge Grips, Fatigue-Rated,3000N/50Nm CapacityNote: These grips are for axial testing only. Grip bodies include one gripwedge jaw set identified by parts 332289-XXXX. | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332292-0010 | Tension/Compression/Torsion (AT) Wedge Grips, Fatigue-Rated,3000N/28Nm Capacity, 3000N/50Nm CapacityNote: Grip bodies include one grip wedge jaw set identified by parts332289-XXXX. | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0010 | Wedge Grip Jaw Set, F1 (for flats 0 to 4.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0020 | Wedge Grip Jaw Set, F2 (for flats 3.5 to 7.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0030 | Wedge Grip Jaw Set, F3 (for flats 6.5 to 10.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0040 | Wedge Grip Jaw Set, F4 (for flats 9.5 to 13.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0050 | Wedge Grip Jaw Set, F5 (for flats 12.5 to 16.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0060 | Wedge Grip Jaw Set, F6 (for flats 15.5 to 19.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0070 | Wedge Grip Jaw Set, R1 (for rounds 4 to 7.2 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0080 | Wedge Grip Jaw Set, R1 (for rounds 7 to 10.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0090 | Wedge Grip Jaw Set, R1 (for rounds 9.7 to 12.5 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0100 | Wedge Grip Jaw Set, R1 (for rounds 12.2 to 15.2 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0110 | Wedge Grip Jaw Set, R1 (for rounds 14.9 to 18.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0120 | Wedge Grip Jaw Set, R1 (for rounds 17.7 to 19.0 mm) | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 333898-0030 | Compression Platens, 50 mm diameter, 5/8-18 Threads, 3000N Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 335039-0010 | Compression Platens, 100 mm diameter, 5/8-18 Threads, 3000N Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 334169-0010 | 3- and 4-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, 5/8-18 Threads, 3000N Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 334169-0020 | 3-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, 5/8-18 Threads, 3000N Capacity | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 760503-0020 | Compliance Calibration Kit for ElectroForce Instruments between1000N and 15000NNote: Recommended when using the DMA Application v8.0 or newer. | ElectroForce 3300 Fixtures | ElectroForce Load Frame and Testbench |
| 332281-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332274-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force CapacityNote: Includes set of 10-32 to 5/8-18 adapters. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332274-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force CapacityNote: Includes set of 10-32 to 5/8-18 adapters. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332276-0010 | Compression Platens, 50 mm diameter, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332276-0020 | Compression Platens, 25 mm diameter, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332277-0030 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332277-0040 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332278-0010 | Adapter, 5/8-18 to 10-32 thread, for use with low force grips and fixtureson standard 1kN or 3kN load sensorsNote: Price is for set of 2. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 760503-0010 | Compliance Calibration Kit for ElectroForce Instruments up to 500NNote: Recommended when using the DMA Application v8.0 or newer. | ElectroForce 3300 Low Force Fixtures | ElectroForce Load Frame and Testbench |
| 332330-0040 | Load Sensor - 1000 Newtons, 5/8-18 threads, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332330-0020 | Load Sensor - 3000 Newtons, 5/8-18 threads, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 760129-0010 | Axial/Torsion Load Sensor 1000N/14 Nm, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0050 | Load Sensor - 22 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0140 | Load Sensor - 45 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0070 | Load Sensor - 225 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0090 | Load Sensor - 450 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0060 | Submersible Load Sensor - 22 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0160 | Submersible Load Sensor - 45 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0080 | Submersible Load Sensor - 225 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332042-0100 | Submersible Load Sensor - 450 Newtons, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 332332-0020 | Axial/Torsion Load Sensor 3000N/56 Nm, configured to matchinstrument capacity, Calibration included | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 367571-0010 | Acceleration compensation option, 100 g accelerometer,5/8-18 Threads | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 367577-0010 | Acceleration compensation option, 100 g accelerometer,8x1/4-28 ThreadsNote: For use on axial-torsion test instruments. Compensates for linearaccelerations only. | ElectroForce 3300 Sensors | ElectroForce Load Frame and Testbench |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for 3310 | ElectroForce 3300 Power Accessories | ElectroForce Load Frame and Testbench |
| 335168-0120 | UPS 3000VA 208V/230V, Power Failure Backup for 3330 Axial and all 3310& 3330 -AT and -ES Configurations | ElectroForce 3300 Power Accessories | ElectroForce Load Frame and Testbench |
| 760891-0010 | Shield Accessory for ElectroForce 3300 Series III with Standard LengthColumnsNote: Compatible with 3300 Series I or II Instruments. | ElectroForce 3300 Other Accessories | ElectroForce Load Frame and Testbench |
| 760891-0020 | Shield Accessory for ElectroForce 3300 Series III with Extended ColumnsNote: Compatible with 3300 Series I or II Instruments. | ElectroForce 3300 Other Accessories | ElectroForce Load Frame and Testbench |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce 3300 Software | ElectroForce Load Frame and Testbench |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce 3300 Software | ElectroForce Load Frame and Testbench |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/-10V high level analog input typical), Includes interface cable andproject file. | ElectroForce 3300 Software | ElectroForce Load Frame and Testbench |
| 335195-0010 | Load Sensor, Mini-Beam - 40 Newtons, Calibration included | ElectroForce 3300 MSF Sensors | ElectroForce Load Frame and Testbench |
| 335195-0040 | Load Sensor, Mini-Beam - 100 Newtons, Calibration included | ElectroForce 3300 MSF Sensors | ElectroForce Load Frame and Testbench |
| 760826-0010 | Autofill Add-on for Existing ElectroForce Bath Accys | ElectroForce 3300 MSF Accessories | ElectroForce Load Frame and Testbench |
| 760872-0010 | Granite Table Assembly for ElectroForce Tabletop Instruments,36” x 36” x 35”H | ElectroForce 3300 MSF Accessories | ElectroForce Load Frame and Testbench |
| 332229-0010 | Tension/Torsion Vice Grips, 316 SS, 3000N/50Nm Capacity Rating,Grit Face | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332229-0040 | Tension/Torsion Vice Grips, 316 SS, 3000N/50Nm Capacity Rating,Knurled Face | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332233-0010 | Tension/Compression Wedge Grips, Fatigue-Rated, 15kN CapacityNote: These grips are for axial testing only. Grip bodies include one gripwedge jaw set identified by parts 332289-XXXX. | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332234-0010 | Tension/Compression/Torsion (AT) Wedge Grips, Fatigue-Rated,15kN/100Nm CapacityNote: Grip bodies include one grip wedge jaw set identified by parts332289-XXXX. | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0010 | Wedge Grip Jaw Set, F1 (for flats 0 to 4.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0020 | Wedge Grip Jaw Set, F2 (for flats 3.5 to 7.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0030 | Wedge Grip Jaw Set, F3 (for flats 6.5 to 10.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0040 | Wedge Grip Jaw Set, F4 (for flats 9.5 to 13.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0050 | Wedge Grip Jaw Set, F5 (for flats 12.5 to 16.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0060 | Wedge Grip Jaw Set, F6 (for flats 15.5 to 19.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0070 | Wedge Grip Jaw Set, R1 (for rounds 4 to 7.2 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0080 | Wedge Grip Jaw Set, R1 (for rounds 7 to 10.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0090 | Wedge Grip Jaw Set, R1 (for rounds 9.7 to 12.5 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0100 | Wedge Grip Jaw Set, R1 (for rounds 12.2 to 15.2 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0110 | Wedge Grip Jaw Set, R1 (for rounds 14.9 to 18.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332289-0120 | Wedge Grip Jaw Set, R1 (for rounds 17.7 to 19.0 mm) | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 333898-0040 | Compression Platens, 50 mm diameter, M16X2 Threads, 15kN Capacity | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 333898-0050 | Compression Platens, 100 mm diameter, M16X2 Threads, 15kN Capacity | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 334169-0030 | 3- and 4-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, M16 Threads, 15kN Capacity | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 334169-0040 | 3-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, M16 Threads, 15kN Capacity | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 760503-0020 | Compliance Calibration Kit for ElectroForce Instruments between1000N and 15000NNote: Recommended when using the DMA Application v8.0 or newer. | ElectroForce 3500 Series - Fixtures | ElectroForce Load Frame and Testbench |
| 332329-0010 | Load Sensor - 1000 Newtons, M16 Threads, Calibration included | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 332329-0020 | Load Sensor - 5000 Newtons, M16 Threads, Calibration included | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 332329-0030 | Load Sensor - 12.5 kN, M16 Threads, Configured to Match InstrumentCapacity, Calibration includedNote: Spare Sensor for 3510. | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 332329-0040 | Load Sensor - 25 kN, M16 Threads, Configured to Match InstrumentCapacity, Calibration includedNote: Spare Sensor for 3550. | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 332331-0010 | Axial/Torsion Load Sensor 1100N/14Nm, 8xM6 Threads,Calibration included | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 332331-0040 | Axial/Torsion Load Sensor 15kN/70Nm, 8xM6 Threads,Calibration included | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 367573-0010 | Acceleration compensation option, 100 g accelerometer,2xM16 Threads | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 369041-0010 | Acceleration compensation option, 100 g accelerometer, 8xM6 ThreadsNote: For use on axial-torsion test instruments. Compensates for linearaccelerations only. | ElectroForce 3500 Series - Sensors | ElectroForce Load Frame and Testbench |
| 752960-0010 | System Status Indicator (SSI) Light Kit | ElectroForce 3500 Series - Other Accessories | ElectroForce Load Frame and Testbench |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce 3500 Series - Software | ElectroForce Load Frame and Testbench |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce 3500 Series - Software | ElectroForce Load Frame and Testbench |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function (+/-10Vhigh level analog input typical). Includes interface cable and project file. | ElectroForce 3500 Series - Software | ElectroForce Load Frame and Testbench |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 350261-0010 | Compression Platens, 10 mm diameter, 500N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332371-0010 | Compression Platens, 25 mm diameter, 500N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332371-0020 | Compression Platens, 50 mm diameter, 500N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332372-0030 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332372-0040 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 336964-0010 | Miniature 3-Point Bend Fixture, 4 mm to 26 mm adjustable lower span,450N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 350106-0010 | Miniature 3- and 4-Point Bend Fixture, 4 mm to 26 mm adjustable lowerspan, 450N Capacity | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 760858-0010 | Precision Adapter Kit for RSA Geometries on ElectroForce 3200 and TestBench200/400N, SST | ElectroForce 200N/400N TestBench Fixtures | ElectroForce Load Frame and Testbench |
| 332042-0240 | Load Sensor - 5 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332042-0050 | Load Sensor - 22 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332042-0140 | Load Sensor - 45 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332042-0070 | Load Sensor - 225 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332042-0250 | Submersible Load Sensor - 5 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332042-0060 | Submersible Load Sensor - 22 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332042-0160 | Submersible Load Sensor - 45 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332042-0080 | Submersible Load Sensor - 225 Newtons, Calibration included | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 332327-0010 | Axial/Torsion Load Sensor 225N/2.8 Nm (gained to value), Calibrationincluded | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 362164-0010 | Acceleration compensation option, 100 g accelerometer, 10-32 Threads | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 362165-0010 | Acceleration compensation option, Lightweight housing, 100 gaccelerometer, 10-32 ThreadsNote: For use with load sensor of 10 Newtons or less. | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 362166-0010 | Acceleration compensation option, 100 g accelerometer, Axial/TorsionmountingNote: For use with Axial/Torsion load sensor. Compensates only for linearaccelerations. | ElectroForce 200N/400N TestBench Sensors | ElectroForce Load Frame and Testbench |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for TestBench base system | ElectroForce 200N/400N TestBench Power Accessories | ElectroForce Load Frame and Testbench |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for 200N/400N TestBench | ElectroForce 200N/400N TestBench Power Accessories | ElectroForce Load Frame and Testbench |
| 340261-0010 | TestBench Vertical Mounting Legs | ElectroForce 200N/400N TestBench Other Accessories | ElectroForce Load Frame and Testbench |
| 752960-0010 | System Status Indicator (SSI) Light Kit | ElectroForce 200N/400N TestBench Other Accessories | ElectroForce Load Frame and Testbench |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce 200N/400N TestBench Software | ElectroForce Load Frame and Testbench |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce 200N/400N TestBench Software | ElectroForce Load Frame and Testbench |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function (+/-10Vhigh level analog input typical). Includes interface cable and projectfile. | ElectroForce 200N/400N TestBench Software | ElectroForce Load Frame and Testbench |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity | ElectroForce Planar Biaxial Fixtures | ElectroForce Load Frame and Testbench |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity | ElectroForce Planar Biaxial Fixtures | ElectroForce Load Frame and Testbench |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. | ElectroForce Planar Biaxial Fixtures | ElectroForce Load Frame and Testbench |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity | ElectroForce Planar Biaxial Fixtures | ElectroForce Load Frame and Testbench |
| 332042-0240 | Load Sensor - 5 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 332042-0050 | Load Sensor - 22 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 332042-0140 | Load Sensor - 45 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 332042-0070 | Load Sensor - 225 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 332042-0250 | Submersible Load Sensor - 5 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 332042-0060 | Submersible Load Sensor - 22 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 332042-0160 | Submersible Load Sensor - 45 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 332042-0080 | Submersible Load Sensor - 225 Newtons, Calibration included | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 362164-0010 | Acceleration compensation option, 100 g accelerometer, 10-32 Threads | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 362165-0010 | Acceleration compensation option, Lightweight housing, 100 gaccelerometer, 10-32 ThreadsNote: For use with load sensor of 10 Newtons or less. | ElectroForce Planar Biaxial Sensors | ElectroForce Load Frame and Testbench |
| 335168-0090 | UPS 2000VA 120V, Power Failure Backup for Planar Biaxial | ElectroForce Planar Biaxial Power Accessories | ElectroForce Load Frame and Testbench |
| 335168-0100 | UPS 2200VA 208V/230V, Power Failure Backup for Planar Biaxial | ElectroForce Planar Biaxial Power Accessories | ElectroForce Load Frame and Testbench |
| 752960-0010 | System Status Indicator (SSI) Light Kit | ElectroForce Planar Biaxial Other Accessories | ElectroForce Load Frame and Testbench |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce Planar Biaxial Software | ElectroForce Load Frame and Testbench |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce Planar Biaxial Software | ElectroForce Load Frame and Testbench |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/- 10V high level analog input typical). Includes interface cable andproject file. | ElectroForce Planar Biaxial Software | ElectroForce Load Frame and Testbench |
| 760018-0010 | Pressure Sensor, Luer lock fittings, 500 mmHg, Calibration included | DuraPulse SGT Sensors | ElectroForce Cardiovascular |
| 331974-0010 | Pressure Sensor, Cavity Type, 1250 mmHg, Calibration included | DuraPulse SGT Sensors | ElectroForce Cardiovascular |
| 332338-0010 | Pressure Sensor, Catheter Type, 500 mmHg, Calibration included | DuraPulse SGT Sensors | ElectroForce Cardiovascular |
| 760152-0010 | 12 Tube Manifold Kit for DuraPulse SGT Instrument | DuraPulse Stent/Graft Test Instrument Accessories | ElectroForce Cardiovascular |
| 760151-0010 | 8 Tube Manifold Kit for DuraPulse SGT Instrument | DuraPulse Stent/Graft Test Instrument Accessories | ElectroForce Cardiovascular |
| 760150-0010 | 6 Tube Manifold Kit for DuraPulse SGT Instrument | DuraPulse Stent/Graft Test Instrument Accessories | ElectroForce Cardiovascular |
| 760153-0010 | 4B Tube Manifold Kit for DuraPulse SGT Instrument | DuraPulse Stent/Graft Test Instrument Accessories | ElectroForce Cardiovascular |
| 332365-0010 | SGT Bellow Assembly, 57.7 mm ID, Quantity 2 BellowsNote: Compatible with 9110, 9120, 9210 and DP SGT-12, DP SGT-8 andDP SGT-4B Instruments. | DuraPulse Stent/Graft Test Instrument Spare Parts | ElectroForce Cardiovascular |
| 332364-0010 | SGT Bellow Assembly, 81.8 mm ID, Quantity 2 BellowsNote: Compatible with 9150, 9400 and DuraPulse SGT-6 Instruments. | DuraPulse Stent/Graft Test Instrument Spare Parts | ElectroForce Cardiovascular |
| 760018-0010 | Pressure Sensor, Luer lock fittings, 500 mmHg, Calibration included | DuraPulse HVT Sensors | ElectroForce Cardiovascular |
| 332338-0010 | Pressure Sensor, 0 - 500 mmHg Measurement Range, Catheter Type,Calibration included | DuraPulse HVT Sensors | ElectroForce Cardiovascular |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for 120V DuraPulse HVT-2 &HVT-4 Instruments | DuraPulse HVT Power Accessories | ElectroForce Cardiovascular |
| 335168-0090 | UPS 2000VA 120V, Power Failure Backup for 120V DuraPulse HVT-6Instruments | DuraPulse HVT Power Accessories | ElectroForce Cardiovascular |
| 335168-0100 | UPS 2200VA 208V/230V, Power Failure Backup for 230V DuraPulse HVT-2,HVT-4 & HVT-6 Instruments | DuraPulse HVT Power Accessories | ElectroForce Cardiovascular |
| 729972-0020 | 45mm Diameter Valve Holder for DuraPulse HVT | DuraPulse HVT Other Accessories | ElectroForce Cardiovascular |
| 729981-0010 | HVT Bellow Assembly, 57.7 mm ID, Quantity 1 BellowNote: Compatible only with DuraPulse HVT Instruments. | DuraPulse HVT Spare Parts | ElectroForce Cardiovascular |
| 731031-0010 | DuraPulse Spare Parts Accessory Kit | DuraPulse HVT Spare Parts | ElectroForce Cardiovascular |
| 335055-0010 | Tensile Grips, Stainless Steel, Grit Blast Grip Face, 200N Capacity | ElectroForce BioDynamic 5100 & 5200 Fixtures | ElectroForce BioDynamic |
| 335056-0010 | Tensile Grips, Stainless Steel, Knurled Grip Face, 200N Capacity | ElectroForce BioDynamic 5100 & 5200 Fixtures | ElectroForce BioDynamic |
| 335054-0010 | BioDynamic Tensile Grips, Self-tightening preloading spring grip with acam lock, 200N Capacity | ElectroForce BioDynamic 5100 & 5200 Fixtures | ElectroForce BioDynamic |
| 332540-0010 | BioDynamic 4-well Non-Porous Platens, 10 mm Diameter | ElectroForce BioDynamic 5100 & 5200 Fixtures | ElectroForce BioDynamic |
| 336965-0010 | Miniature 3-Point Bend Fixture, 4 mm to 26 mm adjustable lower span,200N Capacity | ElectroForce BioDynamic 5100 & 5200 Fixtures | ElectroForce BioDynamic |
| 332325-0010 | Load Sensor - 22 Newtons, Extended Cable, Calibration includedNote: Load Sensor is not used on BioDynamic Pulsatile test instruments. | ElectroForce BioDynamic Sensors | ElectroForce BioDynamic |
| 332338-0010 | Pressure Sensor, 0 - 500 mmHg Measurement Range, Catheter Type,Calibration included | ElectroForce BioDynamic Sensors | ElectroForce BioDynamic |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for BioDynamic Pulsatileand 5100 | ElectroForce BioDynamic Power Accessories | ElectroForce BioDynamic |
| 335168-0090 | UPS 2200VA 120V, Power Failure Backup for BioDynamic 5200 | ElectroForce BioDynamic Power Accessories | ElectroForce BioDynamic |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for BioDynamic Pulsatile,5100 and 5200 | ElectroForce BioDynamic Power Accessories | ElectroForce BioDynamic |
| 752960-0010 | System Status Indicator (SSI) Light Kit | ElectroForce BioDynamic Other Accessories | ElectroForce BioDynamic |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. | ElectroForce BioDynamic Software | ElectroForce BioDynamic |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. | ElectroForce BioDynamic Software | ElectroForce BioDynamic |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/-10V high level analog input typical). Includes interface cable andproject file. | ElectroForce BioDynamic Software | ElectroForce BioDynamic |